Login Register Cart 0
Generic placeholder image

Current Materials Science

Editor-in-Chief

ISSN (Print): 2666-1454
ISSN (Online): 2666-1462

Back
Journal Home About Journal Editorial Board Current Issue Volumes/Issues
Subscribe
Research Article

Finite Element Analysis of Reinforced Concrete Beams Strengthened with Hybrid Fiber Reinforced Polymer Systems using ANSYS

Author(s): Kalyani Gurram and Pannirselvam N.*

Volume 17, Issue 3, 2024

Published on: 26 May, 2023

Page: [256 - 265] Pages: 10

DOI: 10.2174/2666145416666230504143055

Price: $65

conference banner
Abstract

Background: Existing reinforced concrete (RC) structures can deteriorate over time due to aging, poor construction design, natural disasters, etc. In recent years, fiber-reinforced polymer (FRP) composite materials are becoming a preferred choice for concrete construction repair due to their durability, high strength, and corrosion resistance. This study aimed to study and analyze the properties of the constituent materials to identify any weaknesses and potential improvements.

Methods: The present study investigated the effectiveness of flexural strengthening of RC beams using a hybrid grouping of glass-FRP (GFRP) and carbon-FRP (CFRP) unidirectional laminates. ANSYS finite element analysis (FE) software was used to investigate the failure modes of the beams and the stress-strain parameters. The impact of adopting two different grades of reinforcing bars in RC beam modeling was also contrasted in the study.

Results: Comparisons between the finite element analysis and experimental literature results were made. Based on the test findings, it could be concluded that retrofitted beams perform better than non-retrofitted beams. According to experimental results, the HY14 sheet enhanced beam had a 188.46% higher ultimate load than the unenhanced beams.

Conclusion: Comparing experimental findings to the conclusions of the numerical analysis, a maximum difference of ultimate load and deflection at mid-span of 3.40% and 4.91%, respectively, were used to assess the accuracy of the results.

« Previous Next »
[1]
Hind MK, Özakça M, Ekmekyapar T. A review on nonlinear finite element analysis of reinforced concrete beams retrofitted with fiber reinforced polymers. J Adv Res Appl Mech 2016; 22(1): 03-48.
[2]
Abu-Obeidah A, Hawileh RA, Abdalla JA. Finite element analysis of strengthened RC beams in shear with aluminum plates. Comput Struc 2015; 147: 36-46.
[http://dx.doi.org/10.1016/j.compstruc.2014.10.009]
[3]
Zhou Y, Wang X, Sui L, Xing F, Wu Y, Chen C. Flexural performance of FRP-plated RC beams using H-type end anchorage. Compos Struct 2018; 206: 11-21.
[http://dx.doi.org/10.1016/j.compstruct.2018.08.015]
[4]
Fathelbab FA, Ramadan MS, Al-Tantawy A. Strengthening of RC bridge slabs using CFRP sheets. Alex Eng J 2014; 53(4): 843-54.
[http://dx.doi.org/10.1016/j.aej.2014.09.010]
[5]
Abdalla JA, Abu-Obeidah AS, Hawileh RA, Rasheed HA. Shear strengthening of reinforced concrete beams using externally-bonded aluminum alloy plates: An experimental study. Constr Build Mater 2016; 128: 24-37.
[http://dx.doi.org/10.1016/j.conbuildmat.2016.10.071]
[6]
Jayajothi P, Kumutha R, Vijai K. Finite element analysis of FRP strengthened RC beams using ansys. Asian J Civil Eng 2013; 14(4): 631.
[7]
Hawileh RA, Rasheed HA, Abdalla JA, Al-Tamimi AK. Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems. Mater Des 2014; 53: 972-82.
[http://dx.doi.org/10.1016/j.matdes.2013.07.087]
[8]
Balamuralikrishnan R, Jeyasehar CA. Flexural behavior of RC beams strengthened with carbon fiber reinforced polymer (CFRP) Fabrics. Open Civ Eng J 2009; 3(1): 102-9.
[http://dx.doi.org/10.2174/1874149500903010102]
[9]
Biolzi L, Ghittoni C, Fedele R, Rosati G. Experimental and theoretical issues in FRP-concrete bonding. Constr Build Mater 2013; 41: 182-90.
[http://dx.doi.org/10.1016/j.conbuildmat.2012.11.082]
[10]
Naser M, Hawileh R, Abdalla JA, Al-Tamimi A. Bond behavior of CFRP cured laminates: Experimental and numerical investigation. J Eng Mater Technol 2012; 134(2): 021002.
[http://dx.doi.org/10.1115/1.4003565]
[11]
Hawileh RA, Musto HA, Abdalla JA, Naser MZ. Finite element modeling of reinforced concrete beams externally strengthened in flexure with side-bonded FRP laminates. Compos, Part B Eng 2019; 173: 106952.
[http://dx.doi.org/10.1016/j.compositesb.2019.106952]
[12]
Manibalan P, Abirami G, Kesavan S. Flexural response of RC beam strengthened with BFRP plate. Innov Infrastr Sol 2022; 7(2): 142.
[http://dx.doi.org/10.1007/s41062-022-00743-w]
[13]
Bathe K. Finite Element Procedures. Upper Saddle River, New Jersey: Prentice-Hall, Inc. 1996.
[14]
Ebead U, Marzouk H. Tension - stiffening model for FRP strengthened RC concrete two-way slab. Mater Struct 2005; 38: 193-200.
[15]
Pham H, Al-Mahaidi R. Experimental investigation into flexural retrofitting of reinforced concrete bridge beams using FRP composites. Compos Struct 2004; 66(1-4): 617-25.
[http://dx.doi.org/10.1016/j.compstruct.2004.05.010]
[16]
Hamrat M, Bouziadi F, Boulekbache B, et al. Experimental and numerical investigation on the deflection behavior of pre-cracked and repaired reinforced concrete beams with fiber-reinforced polymer. Constr Build Mater 2020; 249: 118745.
[http://dx.doi.org/10.1016/j.conbuildmat.2020.118745]
[17]
Hawileh R, Abdalla JA, Naser MZ, Tanarslan M. Finite element modeling of shear deficient RC beams strengthened with NSM CFRP rods under cyclic loading. Special Publication 2015; 301: pp. 1-8.
[18]
Bouziadi F, Boulekbache B, Haddi A, Djelal C, Hamrat M. Numerical analysis of shrinkage of steel fiber reinforced high-strength concrete subjected to thermal loading. Constr Build Mater 2018; 181: 381-93.
[http://dx.doi.org/10.1016/j.conbuildmat.2018.06.054]
[19]
Sundar N, Raghunath PN, Dhinakaran G. Flexural behavior of RC beams with hybrid FRP strengthening. Int J Civil Eng Technol 2016; 7(6): 427-33.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy