Current Materials Science

Editorial Board

Editor-in-Chief

Ram K. Gupta Department of Chemistry
Pittsburg State University
Pittsburg, KS
USA

Co-Editor-in-Chief

Manoj Gupta Department of Mechanical and Aerospace Engineering
National University of Singapore
Kent Ridge
Singapore

Associate Editor(s)

Mumtaz A. Quraishi Department of Applied Chemistry
King Fahd University of Petroleum and Minerals
Dhahran
Saudi Arabi

Steven L. Suib Department of Chemistry
University of Connecticut
Mansfield, CT
USA

Regional Editor(s)

Middle East

Mohammed S. Aida Department of Physics
King Abdulaziz University
Jeddah
Saudi Arabia

North America

Vijay K. ThakurSchool of Mechanical and Materials Engineering
Washington State University
Pullman, WA
USA

Yoke K. Yap Applied Physics
Michigan Technological University
Houghton, MI
USA

Section Editor(s)

Section: Inorganic Nanostructured Materials

Mohammed Ahmaruzzaman

Department of Chemistry

National Institute of Technology, Silchar

Silchar

India

Section: Fire Safety Evaluation of Materials

Yongqian Shi College of Environment and Resources
Fuzhou University
Fuzhou
China

Section: Nanotechnology

Yongbing Tang Functional Thin Films Research Center
Shenzhen Institutes of Advanced Technology (SIAT)
Chinese Academy of Sciences
Shenzhen
China

Editorial Board Member(s)

Dong-Dong Chen School of Microelectronics
Xidian University
Xi'an
China

Dario De Domenico Department of Engineering
University of Messina
Messina
Italy

Menandro N. Acda Department of Forest Products and Paper Science
University of the Philippines
Los Banos
Philippines

Francesco Aggogeri Department of Mechanical and Industrial Engineering
University of Brescia
Brescia
Italy

Gangadharan A. Kumar Department of Physics and Astronomy
The University of Texas at San Antonio
San Antonio, TX
USA

Mohammed R. Akbarpour Department of Materials Engineering
University of Maragheh
Maragheh
Iran

Javed Ali Department of Pharmaceutical
Jamia Hamdard
New Delhi
India

Dinesh Amalnerkar
Department of Technology
Savitribai Phule Pune University
Pune
India

Cécile AutretFaculté des Sciences & Techniques
Université de Tours
Tours
France

Eugen Axinte Machine Manufacturing Department
Technical University Gheorghe Asachi Iasi
Lasi
Romania

Indra Bahadur Department of Chemistry
North-West University
Mafikeng
South Africa

Abderrahmane BairiLaboratoire Thermique Interfaces Environnement (LTIE)
Université de Paris

Ville D'avray
France

Santanu Basak Department of Textile Technology
ICAR- Central Institute for Research on Cotton Technology
Mumbai
India

Sudip K. BatabyalAmrita Centre for Industrial Research and Innovation (ACIRI)
Amrita School of Engineering
Coimbatore
India

Aman Bhardwaj Department of Chemistry
Hindu College
University of Delhi
Delhi
India

Ashis Bhattacharjee Department of Physics
Visva-Bharati University
Santiniketan
India

Habib Boughzala Faculty of Sciences of Tunis
University of Carthage
Tunis
Tunisia

Ricardo Branco Department of Mechanical Engineering
University of Coimbra
Coimbra
Portugal

Wenbo BuDepartment of Materials Science
Fudan University
Shanghai
China

Alessandro Buccolieri

Department of Mathematics and Physics “Ennio de Giorgi”

University of Salento

Lecce

Italy

Ilaria Cacciotti Materials Science & Technology and Biomaterials & Tissue Engineering
University of Rome
Rome
Italy

Luigi Calabrese Department of Engineering
University of Messina
Messina
Italy

Siang-Pao Chai Chemical Engineering
Monash University
Bandar Sunway
Malaysia

Ming Y. Chian Department of Mechanical and Materials Engineering
Universiti Tunku Abdul Rahman
Petaling Jaya
Malaysia

Paul K. Chu Department of Physics & Materials Science
City University of Hong Kong
Kowloon
Hong Kong

Marco Corradi Department of Mechanical & Construction Engineering
Perugia University
Perugia
Italy

Pantaleo D. Cozolli Department of Mathematics and Physics
University of Salento
Lecce
Italy

Ajay Dalai Chemical Engineering
University of Saskatchewan
Saskatoon
Canada

Stan A. David Oak Ridge National Laboratory
Oak Ridge, TN
USA

Sandeep K. DhawanCSIR-National Physical Laboratory

New Delhi

India

Avi Domb Department of Medicinal Chemistry & Natural Prodcuts
Hebrew University
Jerusalem
Israel

Yu Dong Mechanical Engineering
Curtin University
Perth
Australia

David DudayDepartment MRT
Luxembourg Institute of Science and Technology
Esch-sur-Alzette
Luxembourg

Ahmed El-Fiqi

National Research Centre

Advanced Materials Technology Research Institute

Cairo

Egypt

Jie-Ping Fan Environmental and Chemical Engineering
Nanchang University
Nanchang
China

Monica Ferraris Department of Materials Science and Chemical Engineering
Polytechnic Institute of Torino
Torino
Italy

Mariana A. FragaDepartamento de Engenharia Mecânica
Instituto Cientifico e Tecnologico da Universidade Brasil
Sao Paulo
Brazil

Chris D. Geddes Department of Biochemistry and Molecular Biology
University of Maryland
Baltimore, MD
USA

Sandip P. Harimkar School of Mechanical and Aerospace Engineering
Oklahoma State University
Stillwater, OK
USA

Qian-Jun HE Department of Biochemistry
Shenzhen University
Shenzhen
China

Robert B. Heimann Materials Science
Am Stadtpark 2A
Görlitz
Germany

Yang Hou Department of Chemistry
Zhejiang University
Hangzhou
China

Chun-Hway Hsueh Department of Materials Science & Engineering
National Taiwan University
Taipei
Taiwan

Shengliang Hu Materials Science and Engineering
North University of China
Taiyuan
China

Wei T. Huang

State Key Laboratory of Developmental Biology of Freshwater Fish
Hunan Provincial Key Laboratory of Microbial Molecular Biology
College of Life Science

Hunan Normal University

Changsha

China

David Hui Department of Mechanical Engineering, Materials Science
University of New Orleans
New Orleans, LA
USA

Hatsuo Ishida Department of Macromolecular Science and Engineering
Case Western Reserve University
Cleveland, OH
USA

Bo Jin School of Materials Science and Engineering
Jilin University
Chanchun
China

C. R. Kao Department of Materials Science and Engineering
National Taiwan University
Taipei
Taiwan

Kamal K. Kar Department of Mechanical Engineering and Materials Science Programmer IIT-Kanpur
Indian Institute of Technology
Kanpur
India

Yung-Chih Kuo Department of Chemical Engineering
National Chung Cheng University
Chia-Yi
Taiwan

Rajeshkumar Lakshminarasimhan

Centre for Machining and Materials Testing (CMMT)

KPR Institute of Engineering and Technology

Coimbatore

India

Jonathan Lao Department of Biomaterials
Clermont Auvergne University
Clermont-Ferrand
France

Roger M. Leblanc Department of Chemistry
University of Miami
Florida, FL
USA

Stanislaw Ledakowicz Faculty of Process & Environmental Engineering
Lodz University of Technology
Lodz
Poland

Beata Lesiak-Orłowska Department of Catalysis on Metals
Polish Academy of Sciences
Warsaw
Poland

Run-Wei LiFlexible Magnetic-Electronic Materials and Devices Laboratory
Ningbo Institute of Material Technology Engineering (NIMTE)
Ningbo
China

Ningbo Liao College of Mechanical & Electrical Engineering
Wenzhou University
Wenzhou
China

Jumras Limtrakul Department of Chemistry
Kasetsart University
Bangkok
Thailand

Karen Lozano Mechanical Engineering Department
University of Texas-Rio Grande Valley
Edinburg, TX
USA

Peng Luo

College of Chemistry and Chemical Engineering

Henan Polytechnic University

Jiaozuo

China

Leszek A. Majewski School of Electrical and Electronic Engineering
The University of Manchester
Manchester
UK

Kumar B. Mandal Department of Chemistry
Vellore Institute of Technology (VIT)
Vellore
India

Ayyar Manikandan Department of Chemistry
Bharath University
Chennai
India

Michał MosiałekJerzy Haber Institute of Catalysis and Surface Chemistry

Polish Academy of Sciences (ICSC PAS)

Krakow

Poland

David E. MotaungDST/CSIR National Center for Nano-Structured Materials

Council for Scientific and Industrial Research

Pretoria

South Africa

Prabir K. Mukherjee Department of Physics
Government College of Engineering and Textile Technology
Sermapore
India

Nader Nezafati Department of Nanotechnology and Advanced Materials
Materials and Energy Research Center
Karaj
Iran

Leonardo Pagnotta Department of Mechanical, Energy and Management Engineering
University of Calabria
Rende
Italy

Dinesh Pathak Department of Physics
University of West Indies
Kingston
Jamaica

Juan Pou Applied Physics Department
University of Vigo
Vigo
Spain

Jai Prakash Department of Physics
Aligarh Muslim University
Aligarh
India

Teng Qiu Department of Physics
Southeast University
Nanjing
China

Qing Qu Department of Chemistry
Yunnan University
Kunming
China

Anjanapura V. Raghu Department of Science & Technology
BLDE Deemed-to-be University
Vijayapura
India

Susai Rajendran Department of Chemistry
RVS School of Engineering and Technology
Dindigul
India

Apparao Rao Department of Physics and Astronomy
Clemson University
Clemson, SC
USA

Tie-Zhen Ren School of Chemical Engineering
Hebei University of Technology
Tianjin
China

José L. Rico Faculty of Chemical Engineering
Michoacan University
Morelia
Mexico

Aleksandra Rybak Department of Chemistry
Silesian University of Technology
Gliwice
Poland

Nurettin Şahiner

Department of Chemistry Sciences & Arts

Canakkale Onsekiz Mart University

Canakkale

Turkey

Ranjan K. Sahu CSIR-National Metallurgical Laboratory
Jamshedpur
India

Ayyamperumal Sakthivel Department of Chemistry
Central University of Kerala
Kasaragod
India

Tawfik A. Saleh Chemistry Department
King Fahd University of Petroleum & Minerals
Dhahran
Saudi Arabia

Milena Salvo Materials Science and Chemical Engineering Department
Politecnico di Torino
Torino
Italy

Petros Samaras Department of Food Technology
Technological Educational Institute of Thessaloniki
Thessaloniki
Greece

Jagannathan Sankar Department of Mechanical Engineering
North Carolina A&T State University
Greensboro, NC
USA

Mohd S. Salit Department of Mechanical and Manufacturing Engineering
Universiti Putra Malaysia
Selangor
Malaysia

Zhendong Sha Department of Physics
Xi'an Jiaotong University
Xi'an
China

Vladimir Y. Shevchenko Department of Chemistry
Russian Academy of Sciences
Moscow
Russia

Saroj K. Singh Advanced Materials Technology Department
Institute of Minerals & Materials Technology
Bhubaneswar
India

Prem K. Singh Department of Computer Science and Engineering
GITAM University
Andhra Pradesh
India

Prashant Singh Department of Chemistry
Delhi University
Delhi
India

Satyendra Singh Department of Physics
Maharana Pratap Government Post Graduate College
Hardoi
India

Abhay K. Singh Department of Mechanical Engineering Science
University of Johannesburg
Johannesburg
South Africa

Aimin Song Department of Electrical & Electronic Engineering
University of Manchester
Manchester
UK

Guangling Song Department of Materials Engineering
Xiamen University
Xiamen
China

Iis Sopyan Department of Manufacturing and Materials Engineering
International Islamic University Malaysia
Kuala Lumpur
Malaysia

Ramesh Talreja Department of Aerospace Engineering
Texas A M University
Canyon, TX
USA

Reshef Tenne Department of Materials and Interfaces
Weizmann Institute of Science
Rehovot
Israel

Atul Thakur Amity Centre of Nanotechnology
Amity University Haryana
Gurgaon
India

Jaya S. Tumuluru Biofuels Department
Idaho National Laboratory
Idaho Falls, ID
USA

Saviour A. Umoren Department of Chemistry
King Fahd University of Petroleum and Minerals
Dhahran
Saudi Arabia

Munuswamy Venkatesan Department of Physics
Trinity College Dublin
Dublin
Ireland

Enrica Verné Department of Materials Science & Engineering
Politecnico di Torino
Torino
Italy

Tatjana Volkov-Husovic Metallurgy and Materials Engineering Department
University of Belgrade
Belgrade
Serbia

Yonghui Wang School of Civil Engineering
Harbin Institute of Technology
Harbin
China

Qiuming Wei Department of Mechanical Engineering
University of North Carolina
Charlotte, NC
USA

Lai C. WeiNanotechnology & Catalysis Research Centre
University of Malaya
Kuala Lumpur
Malaysia

Guosong Wu

College of Materials Science and Engineering

Hohai University

Nanjing

China

Jinyang XuDepartment of Mechanical Engineering
Shanghai Jiao Tong University
Shanghai
China

Victor G. Yarzhemsky Department of Chemistry
Kurnakov Institute of General and Inorganic Chemistry
Moscow
Russia

Guan Y. Yeow School of Chemical Sciences
Universiti Sains Malaysia
Penang
Malaysia

Zhigang Yin Department of Materials Physics
Fujian Institute of Research on the Structure of Matter
Fuzhou
China

Rui Yukui Department of Environmental Science
China Agricultural University
Beijing
China

Xiaowei Zeng Department of Mechanical Engineering
The University of Texas at San Antonio
San Antonio, TX
USA

Huihua Zhang School of Civil Engineering and Architecture
Nanchang Hangkong University
Nanchang
Jiangxi

Yue Zhao Department of Electrical Engineering
Shanghai Jiao Tong University
Shanghai
China

Ji ZouCollege of Engineering and Physical Sciences
School of Metallurgy and Materials
University of Birmingham
Birmingham
UK

Anastasios I. Zouboulis Division of Chemical Technology
Aristotle University
Thessaloniki
Greece

Lijian Zuo Department of Materials Science and Engineering
University of Washington
Seattle, WA
USA

Associate Editorial Board Member(s)

Mustafa Turkmen Electrical and Electronics Engineering Department
Erciyes University
Kayseri
Turkey

Ivalina Avramova Department of Physics
Bulgarian Academy of Sciences
Sofia
Bulgaria

Elif B. ÖğütDepartment of Mechanical Engineering
Kocaeli University
Kocaeli
Turkey

Adriana Estokova Department of Material Engineering
Technical University of Kosice
Kosice
Slovakia

Tejendra K. Gupta Department of Physics
Amity University
Noida
India

Pingge He Department of Materials Science and Engineering
University of California
Santa Cruz, CA
USA

Azhar A. Khosa

School of Energy and Power Engineering

Jiangsu University

Zhenjiang

China

Sergey Konovalov Department of Metals Technology and Aviation Materials
Samara National Research University
Samara
Russia

Rajiv Kumar Department of Physics
Goswami Ganesh Dutt Sanatan Dharam College
Hoshiarpur
India

Sumit Kumar Department of Biotechnology
All India Institute of Medical Sciences
New Delhi
India

Vaikuntam I. Lakshmanan Department of Chemistry
Process Research Ortech
Mississauga
Canada

Md. Nafiujjaman Institute for Quantitative Health Science and Engineering

Michigan State University

East Lansing, MI

USA

Sushil Nagar Department of Biochemistry
CCS Haryana Agricultural University
Hisar
India

Truong-Khang NguyenFaculty of Information Technology
School of Technology
Van Lang University
Ho Chi Minh City
Vietnam

Vincenzo Niola Department of Industrial Engineering
University of Naples Federico II
Naples
Italy

Prosenjit Saha Department of Materials Science and Engineering
Indian Institute of Engineering Science and Technology (IIEST)
Howrah
India

Flavio Stochino Department of Civil and Environmental Engineering and Architecture
University of Cagliari
Cagliari
Italy

Maxim Sumets Department of Physics and Astronomy
University of Texas Rio Grande Valley
Brownsville, TX
USA

Sharadrao A. Vanalakar Department of Physics
Shivaji University
Kolhapur
India

Qin Wang Department of Chemistry
Inner Mongolia University
Mongolia
China

Bülent Zeybek Department of Chemistry
Kütahya Dumlupınar University
Kütahya
Turkey

Yong J. Zhou Department of Physics
Shanghai University
Shanghai
China

Executive Guest Editor(s)

Abdelkader DjelloulResearch Center in Semiconductors Technology for Energy (CRTSE)
Algiers
Algeria

Vikas DubeyDepartment of Physics
Bhilai Institute of Technology
Raipur
India

Susanta K. Nath CSIR-National Metallurgical Lab
Jamshedpur
India

Ratnesh Tiwari Department of Applied Physics
Bhilai Institute of Technology
Raipur
India

Divya B. TripathyDepartment of Forensic Science
Galgotias University
Greater Noida
India

Chaolong ZhangSchool of Electrical Engineering and Automation
Wuhan University
Wuhan
China

Journal Information

For Authors

For Editors

For Reviewers

Explore Articles

Open Access

Open Access Articles

For Visitors

Current Materials Science

Submission for General Articles

Submit to Thematic Issues

Call for Conference Speakers

Special Open Access APC Discount

Editorial Board

Middle East

North America