Abstract
Background: The addition of nanoparticles to cellulose paper can improve its mechanical strength, chemical stability, biocompatibility and hydrophobic properties. Silica nanoparticles are known to be inert, hydrophobic, biocompatible, biodegradable and have a good distribution being deposited on surfaces. The main characteristics of 20 nm SiO2 nanoparticles are good chemical and thermal stability with a melting point of 1610-1728°C, a boiling point of 2230°C with a purity of 99.5%.
Objective: To carry out the hydrophobization of paper based on Kraft cellulose and on cellulose obtained from soybean husk with 20-nm size SiO2 nanoparticles and to study hydrophobicity, morphology and topography of the prepared composites. Few relevant patents to the topic have been reviewed and cited.
Methods: The ground and roasted soybean husk was treated with a NaOH, washed and dried. Hydrophobization of paper was carried in aqueous medium by SiO2 addition in weight ratios “paper-SiO2 ” of 0.01-0.05 wt.%, stirring, filtration and drying. The obtained cellulose sheet composites were characterized by Scanning Electron Microscopy (SEM), Transmisión Electron Microscopy (TEM), FTIRspectroscopy, Mullen proofs of hydrophobicity, and contact angle measurements.
Results: The mechanical properties of paper nanocomposites (tensile strength and compression) increased considerably by varying the concentrations. The tensile strength increased by 41-46% and the compressive strength increased by 55-56%. The existence of fiber nanofoils, good adhesion of 20-nm SiO2 nanoparticles to the paper surface, and their homogeneous distribution were observed.
Conclusion: Cellulose was successfully obtained from soybean husk, applying the alkaline-based extraction method. A good reinforcement of cellulose fibers is observed due to the outstanding characteristics of the silicon dioxide nanoparticles.
Keywords: Spray pyrolysis, carbon nanotubes, phthalocyanines, raman spectroscopy, TEM, SEM.
Graphical Abstract
[http://dx.doi.org/10.1038/354056a0]
[http://dx.doi.org/10.1126/science.289.5476.94] [PMID: 10884232]
[http://dx.doi.org/10.1126/science.278.5335.77]
[http://dx.doi.org/10.1039/c1jm12254a]
[http://dx.doi.org/10.1021/ja035763b] [PMID: 12837063]
[http://dx.doi.org/10.1007/1-4020-4574-3_1]
[http://dx.doi.org/10.2298/TSCI1205263H]
[http://dx.doi.org/10.1166/jnn.2013.7651] [PMID: 24205613]
[http://dx.doi.org/10.1088/0022-3727/37/2/017]
[http://dx.doi.org/10.1016/j.diamond.2005.10.011]
[http://dx.doi.org/10.1016/j.jallcom.2016.08.246]
[http://dx.doi.org/10.1166/mat.2015.1248]
[http://dx.doi.org/10.1080/24701556.2017.1357578]
[http://dx.doi.org/10.1021/jp910180y]
[http://dx.doi.org/10.1039/C5RA00872G]
[http://dx.doi.org/10.1016/j.surfrep.2015.04.001]
[http://dx.doi.org/10.1016/j.renene.2014.09.003]
[http://dx.doi.org/10.1016/j.mseb.2004.12.007]
[http://dx.doi.org/10.1039/C5RA07687K]
[http://dx.doi.org/10.1016/S0008-6223(02)00066-0]
[http://dx.doi.org/10.1103/PhysRevB.7.3685]