Abstract
It is a moral duty to act in a way that considers the welfare of both people and the planet. When constructing, two factors should be considered: the sustainability of the developmentrelated workforce and the state of the world after construction. Many experts have achieved notable reforms in the civil infrastructure systems (CIS) sector in the past. However, additive manufacturing (AM) does not seem to be properly understood by the CIS business. This survey examines how all the fundamental components used by AM in CIS, such as metals, cement, and polymers, are utilized. The goal of this patent study is to foster AM innovation, particularly in the CIS, and to provide an overview of AM development from 2011 to 2022. Additionally, the various AM techniques used to construct the aforementioned structures are presented. The audit research suggests that AM might be beneficial in the CIS industry due to the fact that residences, additions, and seats were constructed using this technique. Photos of the constructed structures are also included to enhance the reader's understanding. It is generally assumed that implementing AM tactics in the CIS industry may reduce material consumption, expedite the development process, and enhance employee safety. Due to the limited amount of available research, further investigation into polymer printing and metal printing is recommended.
[1]
W.E. Frazier, "Metal additive manufacturing: A review", J. Mater. Eng. Perform., vol. 23, no. 6, pp. 1917-1928, 2014.
[http://dx.doi.org/10.1007/s11665-014-0958-z]
[http://dx.doi.org/10.1007/s11665-014-0958-z]
[2]
S. Pollack, C. Venkatesh, M. Neff, A.V. Healy, G. Hu, E.A. Fuenmayor, and D.M. Devine, Polymer-Based additive manufacturing: Historical developments, process types and material considerations.In: Polymer-Based Additive Manufacturing., Springer: Cham, 2019, pp. 1-22.
[http://dx.doi.org/10.1007/978-3-030-24532-0_1]
[http://dx.doi.org/10.1007/978-3-030-24532-0_1]
[3]
I. Gibson, D.W. Rosen, B. Stucker, M. Khorasani, D. Rosen, B. Stucker, and M. Khorasani, Additive manufacturing technologies., vol., vol. 17. Springer: Cham, Switzerland, 2021.
[http://dx.doi.org/10.1007/978-3-030-56127-7]
[http://dx.doi.org/10.1007/978-3-030-56127-7]
[4]
D.L. Bourell, D.W. Rosen, and M.C. Leu, "“The roadmap for additive manufacturing and its impact”, 3D Print", Addit. Manuf., vol. 1, no. 1, pp. 6-9, 2014.
[5]
D. Bourell, J.P. Kruth, M. Leu, G. Levy, D. Rosen, A.M. Beese, and A. Clare, "Materials for additive manufacturing", CIRP Ann., vol. 66, no. 2, pp. 659-681, 2017.
[http://dx.doi.org/10.1016/j.cirp.2017.05.009]
[http://dx.doi.org/10.1016/j.cirp.2017.05.009]
[6]
B. Khoshnevis, "Automated construction by contour crafting—related robotics and information technologies", Autom. Construct., vol. 13, no. 1, pp. 5-19, 2004.
[http://dx.doi.org/10.1016/j.autcon.2003.08.012]
[http://dx.doi.org/10.1016/j.autcon.2003.08.012]
[7]
M. Revilla-León, and M. Özcan, "Additive manufacturing technologies used for 3D metal printing in dentistry", Curr. Oral Health Rep., vol. 4, no. 3, pp. 201-208, 2017.
[http://dx.doi.org/10.1007/s40496-017-0152-0]
[http://dx.doi.org/10.1007/s40496-017-0152-0]
[8]
A.A. Shapiro, J.P. Borgonia, Q.N. Chen, R.P. Dillon, B. McEnerney, R. Polit-Casillas, and L. Soloway, "Additive manufacturing for aerospace flight applications", J. Spacecr. Rockets, vol. 53, no. 5, pp. 952-959, 2016.
[http://dx.doi.org/10.2514/1.A33544]
[http://dx.doi.org/10.2514/1.A33544]
[9]
J.C. Najmon, S. Raeisi, and A. Tovar, Review of additive manufacturing technologies and applications in the aerospace industry ", In: Additive manufacturing for the aerospace industry. 2019, pp. 7-31.
[10]
S. Negi, S. Dhiman, and R.K. Sharma, "Basics, applications and future of additive manufacturing technologies: A review", J. Manuf. Technol. Manag., vol. 5, no. 1/2, p. 75, 2013.
[11]
B. Lyons, "Additive manufacturing in aerospace: Examples and research outlook", Bridge, vol. 44, no. 3, 2014.
[12]
M. Muir, and A. Haddud, "Additive manufacturing in the mechanical engineering and medical industries spare parts supply chain", J. Manuf. Tech. Manag., vol. 29, no. 2, 2017.
[13]
S.L. Ford, "Additive manufacturing technology: potential implications for US manufacturing competitiveness", J. Int’l Com. & Econ., vol. 6, p. 40, 2014.
[14]
J.W. Mroszczyk, A Strategy for Reducing Construction Fatalities., ASSE Professional Development Conference and Exposition. OnePetro, 2015.
[15]
K.V. Wong, and A. Hernandez, A review of additive manufacturing.Int. Sch. Res. Notices, . , vol. 2012, 2012.
[16]
T.P. Ribeiro, L.F.A. Bernardo, and J.M.A. Andrade, "Topology optimisation in structural steel design for additive manufacturing", Appl. Sci. , vol. 11, no. 5, p. 2112, 2021.
[http://dx.doi.org/10.3390/app11052112]
[http://dx.doi.org/10.3390/app11052112]
[17]
A. Bhardwaj, S.Z. Jones, N. Kalantar, Z. Pei, J. Vickers, T. Wangler, P. Zavattieri, and N. Zou, "Ad-ditive manufacturing processes for infrastructure construction: A review", J. Manuf. Sci. Eng., vol. 141, no. 9, .091010
2019 [http://dx.doi.org/10.1115/1.4044106]
2019 [http://dx.doi.org/10.1115/1.4044106]
[18]
F. Sartipi, and A. Sartipi, "Brief review on advancements in construction additive manufacturing", Constr. Build. Mater., vol. 1, no. 2, 2020.
[http://dx.doi.org/10.36756/JCM.v1.2.4]
[http://dx.doi.org/10.36756/JCM.v1.2.4]
[19]
A. Kumar, G. Singh, R.P. Singh, and P.M. Pandey, Role of additive manufacturing in industry 4.0 for maintenance engineering.", In: Applications and Challenges of Maintenance and Safety Engineering in Industry 4.0., IGI Global, 2020, pp. 235-254.
[http://dx.doi.org/10.4018/978-1-7998-3904-0.ch013]
[http://dx.doi.org/10.4018/978-1-7998-3904-0.ch013]
[20]
F. Hamidi, and F. Aslani, "Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges", Constr. Build. Mater., vol. 218, pp. 582-609, 2019.
[http://dx.doi.org/10.1016/j.conbuildmat.2019.05.140]
[http://dx.doi.org/10.1016/j.conbuildmat.2019.05.140]
[21]
S.C. Altıparmak, and B. Xiao, "A market assessment of additive manufacturing potential for the aerospace industry", J. Manuf. Process., vol. 68, pp. 728-738, 2021.
[http://dx.doi.org/10.1016/j.jmapro.2021.05.072]
[http://dx.doi.org/10.1016/j.jmapro.2021.05.072]
[22]
H. Parmar, T. Khan, F. Tucci, R. Umer, and P. Carlone, "Advanced robotics and additive manufacturing of composites: Towards a new era in Industry 4.0", Mater. Manuf. Process., vol. 37, no. 5, pp. 483-517, 2022.
[http://dx.doi.org/10.1080/10426914.2020.1866195]
[http://dx.doi.org/10.1080/10426914.2020.1866195]
[23]
M. Valente, A. Sibai, and M. Sambucci, "Extrusion-based additive manufacturing of concrete products: revolutionizing and remodeling the construction industry", J. Compos. Sci., vol. 3, no. 3, p. 88, 2019.
[24]
D.D. Camacho, P. Clayton, W. O’Brien, R. Ferron, M. Juenger, S. Salamone, and C. Seepersad, "Applications of additive manufacturing in the construction industry-a prospective review", In Proceedings of the International Symposium on Automation and Robotics in Construction, vol. 34, 2017, pp. 110-119
[25]
M. Peerzada, S. Abbasi, K.T. Lau, and N. Hameed, "Additive manufacturing of epoxy resins: Materials, methods, and latest trends", Ind. Eng. Chem. Res., vol. 59, no. 14, pp. 6375-6390, 2020.
[http://dx.doi.org/10.1021/acs.iecr.9b06870]
[http://dx.doi.org/10.1021/acs.iecr.9b06870]
[26]
L.J. Kumar, and C.G. Krishnadas Nair, Current trends of additive manufacturing in the aerospace industry.", In: Advances in 3D printing & additive manufacturing technologies., Springer: Singapore, 2017, pp. 39-54.
[http://dx.doi.org/10.1007/978-981-10-0812-2_4]
[http://dx.doi.org/10.1007/978-981-10-0812-2_4]
[27]
D. De Baere, M. Strantza, M. Hinderdael, W. Devesse, and P. Guillaume, "Effective structural health monitoring with additive manufacturing", In 7th European Workshop on Structural Health Monitoring 2014 July 8-11, 2014. La Cité, Nantes, France
[28]
S.M.E. Sepasgozar, A. Shi, L. Yang, S. Shirowzhan, and D.J. Edwards, "Additive manufacturing applications for industry 4.0: A systematic critical review", Buildings, vol. 10, no. 12, p. 231, 2020.
[http://dx.doi.org/10.3390/buildings10120231]
[http://dx.doi.org/10.3390/buildings10120231]
[29]
L. Berrocal, R. Fernández, S. González, A. Periñán, S. Tudela, J. Vilanova, L. Rubio, J.M. Martín Márquez, J. Guerrero, and F. Lasagni, "Topology optimization and additive manufacturing for aerospace components", Prog. Addit. Manuf., vol. 4, no. 2, pp. 83-95, 2019.
[http://dx.doi.org/10.1007/s40964-018-0061-3]
[http://dx.doi.org/10.1007/s40964-018-0061-3]
[30]
N. Ducoulombier, L. Demont, C. Chateau, M. Bornert, and J.F. Caron, "Additive manufacturing of anisotropic concrete: A flow-based pultrusion of continuous fibers in a cementitious matrix", Procedia Manuf., vol. 47, pp. 1070-1077, 2020.
[http://dx.doi.org/10.1016/j.promfg.2020.04.117]
[http://dx.doi.org/10.1016/j.promfg.2020.04.117]
[31]
M. Milazzo, N. Contessi Negrini, S. Scialla, B. Marelli, S. Farè, S. Danti, and M.J. Buehler, "Additive manufacturing approaches for hydroxyapatite-reinforced composites", Adv. Funct. Mater., vol. 29, no. 35, .1903055
2019 [http://dx.doi.org/10.1002/adfm.201903055]
2019 [http://dx.doi.org/10.1002/adfm.201903055]
[32]
F. Craveiroa, J.P. Duartec, H. Bartoloa, and P.J. Bartolod, "Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0", Sustain. Dev. , vol. 4, no. 6, 2019.
[33]
D. Delgado Camacho, P. Clayton, W.J. O’Brien, C. Seepersad, M. Juenger, R. Ferron, and S. Salamone, "Applications of additive manufacturing in the construction industry – A forward-looking review", Autom. Construct., vol. 89, pp. 110-119, 2018.
[http://dx.doi.org/10.1016/j.autcon.2017.12.031]
[http://dx.doi.org/10.1016/j.autcon.2017.12.031]
[34]
C. Dordlofva, A. Lindwall, and P. Törlind, ""Opportunities and challenges
for additive manufacturing in space applications. DS 85-1",
Proceedings of Nord Design 2016, 2016pp. 401-410 Trondheim,
Norway",
[35]
Z. Lin, K. Song, and X. Yu, "A review on wire and arc additive manufacturing of titanium alloy", J. Manuf. Process., vol. 70, pp. 24-45, 2021.
[http://dx.doi.org/10.1016/j.jmapro.2021.08.018]
[http://dx.doi.org/10.1016/j.jmapro.2021.08.018]
[36]
M.S. Hossain, J.A. Gonzalez, R.M. Hernandez, M.A.I. Shuvo, J. Mireles, A. Choudhuri, Y. Lin, and R.B. Wicker, "Fabrication of smart parts using powder bed fusion additive manufacturing technology", Addit. Manuf., vol. 10, pp. 58-66, 2016.
[http://dx.doi.org/10.1016/j.addma.2016.01.001]
[http://dx.doi.org/10.1016/j.addma.2016.01.001]
[37]
A. Al Rashid, S.A. Khan, S.G. Al-Ghamdi, and M. Koc, "Additive manufacturing: Technology, applications, markets, and opportunities for the built environment", Autom. Construct., vol. 118, .103268
2020 [http://dx.doi.org/10.1016/j.autcon.2020.103268]
2020 [http://dx.doi.org/10.1016/j.autcon.2020.103268]
[38]
A. Bacciaglia, A. Ceruti, and A. Liverani, "A systematic review of voxelization method in additive manufacturing", Mech. Ind., vol. 20, no. 6, p. 630, 2019.
[http://dx.doi.org/10.1051/meca/2019058]
[http://dx.doi.org/10.1051/meca/2019058]
[39]
T. Feucht, J. Lange, B. Waldschmitt, A.K. Schudlich, M. Klein, and M. Oechsner, Welding process for the additive manufacturing of cantilevered components with the WAAM.", In: Advanced Joining Processes., Springer: Singapore, 2020, pp. 67-78.
[http://dx.doi.org/10.1007/978-981-15-2957-3_5]
[http://dx.doi.org/10.1007/978-981-15-2957-3_5]
[40]
P. Shakor, S. Nejadi, G. Paul, and S. Malek, "Review of emerging additive manufacturing technologies in 3D printing of cementitious materials in the construction industry", Front. Built Environ., vol. 4, p. 85, 2019.
[http://dx.doi.org/10.3389/fbuil.2018.00085]
[http://dx.doi.org/10.3389/fbuil.2018.00085]
[41]
M. Gorelik, "Additive manufacturing in the context of structural integrity", Int. J. Fatigue, vol. 94, pp. 168-177, 2017.
[http://dx.doi.org/10.1016/j.ijfatigue.2016.07.005]
[http://dx.doi.org/10.1016/j.ijfatigue.2016.07.005]
[42]
M. Mehrpouya, A. Dehghanghadikolaei, B. Fotovvati, A. Vosooghnia, S.S. Emamian, and A. Gisario, "The potential of additive manufacturing in the smart factory industrial 4.0: A review", Appl. Sci. , vol. 9, no. 18, p. 3865, 2019.
[http://dx.doi.org/10.3390/app9183865]
[http://dx.doi.org/10.3390/app9183865]
[43]
G. Cicala, A. Latteri, B. Del Curto, A. Lo Russo, G. Recca, and S. Farè, "Engineering thermoplastics for additive manufacturing: A critical perspective with experimental evidence to support functional applications", J. Appl. Biomater. Funct. Mater., vol. 15, no. 1, pp. 10-18, 2017.
[http://dx.doi.org/10.5301/jabfm.5000343] [PMID: 28134971]
[http://dx.doi.org/10.5301/jabfm.5000343] [PMID: 28134971]
[44]
A. Uriondo, M. Esperon-Miguez, and S. Perinpanayagam, "The present and future of additive manufacturing in the aerospace sector: A review of important aspects", Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng., vol. 229, no. 11, pp. 2132-2147, 2015.
[http://dx.doi.org/10.1177/0954410014568797]
[http://dx.doi.org/10.1177/0954410014568797]
[45]
K. James, C.R. Deckaud, and R.L. Zinniel, "Additive manufacturing method for building three-dimensional objects with core-shell arrangements, and three-dimensional objects thereof", U.S. Patent 10493695B2, , 2007.
[46]
C. Mandolla, A.M. Petruzzelli, G. Percoco, and A. Urbinati, "Building a digital twin for additive manufacturing through the exploitation of blockchain: A case analysis of the aircraft industry", Comput. Ind., vol. 109, pp. 134-152, 2019.
[http://dx.doi.org/10.1016/j.compind.2019.04.011]
[http://dx.doi.org/10.1016/j.compind.2019.04.011]
[47]
M. Milazzo, and F. Libonati, "The synergistic role of additive manufacturing and artificial intelligence for the design of new advanced intelligent systems", Adv. Intell. Syst., vol. 4, no. 6, .2100278
2022 [http://dx.doi.org/10.1002/aisy.202100278]
2022 [http://dx.doi.org/10.1002/aisy.202100278]
[48]
Y. Zhang, W. Jarosinski, Y.G. Jung, and J. Zhang, Additive manufacturing processes and equipment.", In: Additive manufacturing., Butterworth-Heinemann, 2018, pp. 39-51.
[http://dx.doi.org/10.1016/B978-0-12-812155-9.00002-5]
[http://dx.doi.org/10.1016/B978-0-12-812155-9.00002-5]
[49]
J. Go, and A.J. Hart, "A framework for teaching the fundamentals of additive manufacturing and en-abling rapid innovation", Addit. Manuf., vol. 10, pp. 76-87, 2016.
[http://dx.doi.org/10.1016/j.addma.2016.03.001]
[http://dx.doi.org/10.1016/j.addma.2016.03.001]
[50]
M.H. Raza, and R.Y. Zhong, "A sustainable roadmap for additive manufacturing using geopolymers in construction industry", Resour. Conserv. Recycling, vol. 186, .106592
2022 [http://dx.doi.org/10.1016/j.resconrec.2022.106592]
2022 [http://dx.doi.org/10.1016/j.resconrec.2022.106592]
[51]
S. Rosso, F. Uriati, L. Grigolato, R. Meneghello, G. Concheri, and G. Savio, "An optimization workflow in design for additive manufacturing", Appl. Sci., vol. 11, no. 6, p. 2572, 2021.
[http://dx.doi.org/10.3390/app11062572]
[http://dx.doi.org/10.3390/app11062572]
[52]
S. Ford, and M. Despeisse, "Additive manufacturing and sustainability: an exploratory study of the advantages and challenges", J. Clean. Prod., vol. 137, pp. 1573-1587, 2016.
[http://dx.doi.org/10.1016/j.jclepro.2016.04.150]
[http://dx.doi.org/10.1016/j.jclepro.2016.04.150]
[53]
G. Liu, X. Zhang, X. Chen, Y. He, L. Cheng, M. Huo, J. Yin, F. Hao, S. Chen, P. Wang, S. Yi, L. Wan, Z. Mao, Z. Chen, X. Wang, Z. Cao, and J. Lu, "Additive manufacturing of structural materials", Mater. Sci. Eng. Rep., vol. 145, .100596
2021 [http://dx.doi.org/10.1016/j.mser.2020.100596]
2021 [http://dx.doi.org/10.1016/j.mser.2020.100596]
[54]
I. Baturynska, O. Semeniuta, and K. Martinsen, "Optimization of process parameters for powder bed fusion additive manufacturing by combination of machine learning and finite element method: A conceptual framework", Procedia CIRP, vol. 67, pp. 227-232, 2018.
[http://dx.doi.org/10.1016/j.procir.2017.12.204]
[http://dx.doi.org/10.1016/j.procir.2017.12.204]
[55]
M. Marya, V. Singh, S. Marya, and J.Y. Hascoet, "Microstructural development and technical challenges in laser additive manufacturing: case study with a 316L industrial part", Metall. Mater. Trans., B, Process Metall. Mater. Proc. Sci., vol. 46, no. 4, pp. 1654-1665, 2015.
[http://dx.doi.org/10.1007/s11663-015-0310-5]
[http://dx.doi.org/10.1007/s11663-015-0310-5]
[56]
B. Blakey-Milner, P. Gradl, G. Snedden, M. Brooks, J. Pitot, E. Lopez, M. Leary, F. Berto, and A. du Plessis, "Metal additive manufacturing in aerospace: A review", Mater. Des., vol. 209, .110008
2021 [http://dx.doi.org/10.1016/j.matdes.2021.110008]
2021 [http://dx.doi.org/10.1016/j.matdes.2021.110008]
[57]
S. Guessasma, H. Nouri, and F. Roger, "Microstructural and mechanical implications of microscaled assembly in droplet-based multi-material additive manufacturing", Polymers , vol. 9, no. 12, p. 372, 2017.
[http://dx.doi.org/10.3390/polym9080372] [PMID: 30971050]
[http://dx.doi.org/10.3390/polym9080372] [PMID: 30971050]
Related Books
Advanced Characterization Technologies for Secondary Batteries
Design and Construction of Buildings and Foundations with Illustrative Examples
Robotics and Automation in Industry 4.0
Biomedical Applications of Perovskites: The Era of Bio-Piezoelectric Systems
Smart Kinematics For Modern Engineering Students
Computational Modeling and Simulation in Biomedical Research
Introduction to Advanced Soft Robotics
Intelligent Technologies for Research and Engineering
The Production of Biodiesel and Related Fuel Additives
Intelligent Technologies for Research and Engineering
