Abstract
Background: Static Synchronous Compensator plays an essential role in governing the reactive power and harmonics of power systems. The accuracy and real-time performance of reactive power and harmonic detection are necessary to ensure balancing compensation effectiveness. The traditional dq current detection method can only extract positive sequence components in the positive sequence rotational reference frame and extract negative sequence components in the negative sequence rotational reference frame.
Objective: This paper aims to give a practical and straightforward current detection solution to enhance the compensator performance and simplify the control system by extracting the positive sequence, negative sequence, and harmonics in the positive sequence rotational reference frame.
Methods: Firstly, a grid-connected four-quadrant converter with an Inductance-Capacitance- Inductance (LCL) filter balancing compensation topology is constructed. Then an improved current detection algorithm is proposed to extract the positive sequence, negative sequence, and harmonics in the positive rotational reference frame separately. Finally, the Direct Current (DC) side voltage design method is discussed to avoid the overmodulation effects.
Results: Matlab simulation and a prototype 500kVA Static Synchronous Compensator (STATCOM) experiment are implemented to demonstrate the proposed method.
Conclusion: The proposed strategy can effectively improve the compensation accuracy, and the system structure is simplified while the stability and reliability of the whole system are ensured.
Keywords: Balancing compensation, current detection, DC voltage, STATCOM, single-phase load, Modular Multilevel Converter (MMC).
Graphical Abstract
[1]
P. Nayak, A. Pattnaik, M.N. Mohanty, and R.K. Mallick, "Improvement of power quality in distribu-tion system using D-STATCOM", In: Power Electronics and Renewable Energy Systems., Springer: New Delhi, 2015, pp. 395-406.
[http://dx.doi.org/10.1007/978-81-322-2119-7_40]
[http://dx.doi.org/10.1007/978-81-322-2119-7_40]
[2]
M. Bajaj, and A.K. Singh, "Grid integrated renewable DG systems: A review of power quality chal-lenges and state‐of‐the‐art mitigation techniques", Int. J. Energy Res., vol. 44, no. 1, pp. 26-69, 2020.
[http://dx.doi.org/10.1002/er.4847]
[http://dx.doi.org/10.1002/er.4847]
[3]
Y.J. Shin, E.J. Powers, M. Grady, and A. Arapostathis, "Power quality indices for transient disturb-ances", IEEE Trans. Power Deliv., vol. 21, no. 1, pp. 253-261, 2005.
[http://dx.doi.org/10.1109/TPWRD.2005.855444]
[http://dx.doi.org/10.1109/TPWRD.2005.855444]
[4]
S. Asha Kiranmai, and A. Jaya Laxmi, "Hardware for classification of power quality problems in three phase system using Microcontroller", Cogent Eng., vol. 4, no. 1, 2017.1386364
[http://dx.doi.org/10.1080/23311916.2017.1386364]
[http://dx.doi.org/10.1080/23311916.2017.1386364]
[5]
D. Stanelyte, and V. Radziukynas, "Review of voltage and reactive power control algorithms in elec-trical distribution networks", Energies, vol. 13, no. 1, p. 58, 2020.
[http://dx.doi.org/10.3390/en13010058]
[http://dx.doi.org/10.3390/en13010058]
[6]
O.P. Mahela, and A.G. Shaik, "Topological aspects of power quality improvement techniques: A com-prehensive overview", Renew. Sustain. Energy Rev., vol. 58, pp. 1129-1142, 2016.
[http://dx.doi.org/10.1016/j.rser.2015.12.251]
[http://dx.doi.org/10.1016/j.rser.2015.12.251]
[7]
B. Singh, S. Gairola, B.N. Singh, A. Chandra, and K. Al-Haddad, "Multipulse AC–DC converters for improving power quality: A review", IEEE Trans. Power Electron., vol. 23, no. 1, pp. 260-281, 2008.
[http://dx.doi.org/10.1109/TPEL.2007.911880]
[http://dx.doi.org/10.1109/TPEL.2007.911880]
[8]
E. Hossain, M.R. Tür, S. Padmanaban, S. Ay, and I. Khan, "Analysis and mitigation of power quality issues in distributed generation systems using custom power devices", IEEE Access, vol. 6, pp. 16816-16833, 2018.
[http://dx.doi.org/10.1109/ACCESS.2018.2814981]
[http://dx.doi.org/10.1109/ACCESS.2018.2814981]
[9]
(a) G. Mayordomo Julio, "Mohamed Lzzeddine, and Rafael Asensi, “Load and voltage balancing in harmonic power flows by means of static var compensators”", IEEE Trans. Power Deliv., vol. 17, no. 3, pp. 761-769, 2002. (b) N.G. Hingorani, "Flexible AC transmission", IEEE Spectr., vol. 30, no. 4, pp. 40-45, 1993.
[10]
R. Marquardt, A new modular voltage source inverter topology. Conf. Rec. EPE, vol. 2003, , 2003.
[11]
M. Davies, M. Dommaschk, J. Dorn, J. Lang, D. Retzmann, and D. Soerangr, "HVDC plus–basics and principle of operation", In: Special Edition for Cigré Exposition., 2008.
[12]
H. Akagi, "Classification, terminology, and application of the Modular Multilevel Cascade Converter (MMCC)", IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3119-3130, 2011.
[http://dx.doi.org/10.1109/TPEL.2011.2143431]
[http://dx.doi.org/10.1109/TPEL.2011.2143431]
[13]
H.L. Jou, J.C. Wu, and K.D. Wu, "Parallel operation of passive power filter and hybrid power filter for harmonic suppression", IEE Proceedings-Generation, Transmission and Distrib., vol. 148, no. 1, pp. 8-14, 2001.
[http://dx.doi.org/10.1049/ip-gtd:20010155]
[http://dx.doi.org/10.1049/ip-gtd:20010155]
[14]
J. Pou, S. Ceballos, G. Konstantinou, V.G. Agelidis, R. Picas, and J. Zaragoza, "Circulating current injection methods based on instantaneous information for the modular multilevel converter", IEEE Trans. Ind. Electron., vol. 62, no. 2, pp. 777-788, 2014.
[http://dx.doi.org/10.1109/TIE.2014.2336608]
[http://dx.doi.org/10.1109/TIE.2014.2336608]
[15]
R. Picas, S. Ceballos, J. Pou, J. Zaragoza, G. Konstantinou, and V.G. Agelidis, "Closed-loop discon-tinuous modulation technique for capacitor voltage ripples and switching losses reduction in modular multilevel converters", IEEE Trans. Power Electron., vol. 30, no. 9, pp. 4714-4725, 2014.
[http://dx.doi.org/10.1109/TPEL.2014.2368055]
[http://dx.doi.org/10.1109/TPEL.2014.2368055]
[16]
M. Hagiwara, I. Hasegawa, and H. Akagi, "Start-up and low-speed operation of an electric motor driven by a modular multilevel cascade inverter", IEEE Trans. Ind. Appl., vol. 49, no. 4, pp. 1556-1565, 2013.
[http://dx.doi.org/10.1109/TIA.2013.2256331]
[http://dx.doi.org/10.1109/TIA.2013.2256331]
[17]
A. Antonopoulos, L. Ängquist, S. Norrga, K. Ilves, L. Harnefors, and H.P. Nee, Modular multilevel converter AC motor drives with constant torque from zero to nominal speed IEEE Trans. Ind.. Appl., vol. 50, 20132013no. 3, pp. 1982-1993
[18]
H. Yuan, M. Bi, and Z. Chen, "FPGA realization of reactive power measurement system based on FFT", In: 2012 7th IEEE Conference on Industrial Electronics and Applications (ICIEA), vol. 2012., 2012, pp. 2018-2022.
[19]
J. Zhu, L. Li, and M. Pan, "Research on modular STATCOM based on dynamic reactive current de-tection method", Int. J. Adv. Technol. Eng. Explor., vol. 3, no. 23, pp. 150-7, 2012.
[20]
G. Netam, and A. Yadav, "Fault detection, classification and section identification on distribution network with D-STATCOM using ANN", Int. J. Adv. Technol. Eng. Explor., vol. 3, no. 23, pp. 150-157, 2016.
[http://dx.doi.org/10.19101/IJATEE.2016.323001]
[http://dx.doi.org/10.19101/IJATEE.2016.323001]
[21]
S. Jadhav, and N. Jangle, "Improvement in power quality performance using S-transform based D-STATCOM", In: 2018 IEEE International Conference on System, Computation, Automation and Net-working (ICSCA), 2018, pp. 1-6.
[http://dx.doi.org/10.1109/ICSCAN.2018.8541210]
[http://dx.doi.org/10.1109/ICSCAN.2018.8541210]
[22]
G.V. Raju, and E. Koley, "Fuzzy logic based fault detector and classifier for three phase transmission lines with STATCOM", In: 2016 International Conference on Electrical Power and Energy Systems (ICEPES), 2016, pp. 469-474.
[http://dx.doi.org/10.1109/ICEPES.2016.7915976]
[http://dx.doi.org/10.1109/ICEPES.2016.7915976]
[23]
E.X. Li, W.X. Sheng, J.P. Sun, and X.L. Meng, "The study on current detecting algorithm based on generalized instantaneous reactive power theory", In: 2010 IEEE Asia-Pacific Power and Energy Engineering Conference, vol. 2010, 2010, pp. 1-4.
[24]
G.D. Marques, "A comparison of active power filter control methods in unbalanced and non-sinusoidal conditions", In: IECON'98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No. 98CH36200), vol. 1., 1998, pp. 444-449.
[http://dx.doi.org/10.1109/IECON.1998.724284]
[http://dx.doi.org/10.1109/IECON.1998.724284]
[25]
H. Karimi, M. Karimi-Ghartemani, M.R. Iravani, and A.R. Bakhshai, "An adaptive filter for synchro-nous extraction of harmonics and distortions", IEEE Trans. Power Deliv., vol. 18, no. 4, pp. 1350-1356, 2003.
[http://dx.doi.org/10.1109/TPWRD.2003.817752]
[http://dx.doi.org/10.1109/TPWRD.2003.817752]
[26]
X. Zhou, Y. Ma Zhong, and K. Guo, "Research on improved p-q reactive current detection method based on synchronous rotary angle", In: 2021 IEEE International Conference on Mechatronics and Automation (ICMA), 2021, pp. 531-536.
[http://dx.doi.org/10.1109/ICMA52036.2021.9512597]
[http://dx.doi.org/10.1109/ICMA52036.2021.9512597]
[27]
Q. Lu, W. Ni, X. Wang, and L. Zhuang, Study on SVG for reactive power compensation and har-monic suppression based on active current separation.In: 2011 Chinese Control and Decision Con-ference., CCDC, 2011, pp. 3653-3657.
[http://dx.doi.org/10.1109/CCDC.2011.5968857]
[http://dx.doi.org/10.1109/CCDC.2011.5968857]
[28]
L. Xing, and Z. Guang, "A method of reactive current signal detection for SVC control system based on the instantaneous reactive power theory", Power Electron., vol. 40, pp. 121-123, 2006.
[29]
M. Bajaj, and A.S. Rana, "Harmonics and reactive power compensation of three phase induction mo-tor drive by photovoltaic-based DSTATCOM", Smart Sci., vol. 6, no. 4, pp. 319-329, 2018.
[http://dx.doi.org/10.1080/23080477.2018.1505114]
[http://dx.doi.org/10.1080/23080477.2018.1505114]
[30]
K. Takagi, and H. Fujita, "A three-phase grid-connected inverter equipped with a shunt instantaneous reactive power compensator", IEEE Trans. Ind. Appl., vol. 55, no. 4, pp. 3955-3966, 2019.
[http://dx.doi.org/10.1109/TIA.2019.2910487]
[http://dx.doi.org/10.1109/TIA.2019.2910487]
[31]
Z. Liu, B. Liu, S. Duan, and Y. Kang, "A novel DC capacitor voltage balance control method for cas-cade multilevel STATCOM", IEEE Trans. Power Electron., vol. 27, no. 1, pp. 14-27, 2012.
[http://dx.doi.org/10.1109/TPEL.2010.2050337]
[http://dx.doi.org/10.1109/TPEL.2010.2050337]
[32]
J. Wang, V. Najmi, R. Burgos, and D. Boroyevich, Reliability-oriented IGBT selection for high power converters.In: 2015 IEEE Applied Power Electronics Conference and Exposition., APEC, 2015, pp. 2500-2503.
[http://dx.doi.org/10.1109/APEC.2015.7104701]
[http://dx.doi.org/10.1109/APEC.2015.7104701]
[33]
U. Choi, F. Blaabjerg, and K. Lee, "Study and handling methods of power IGBT module failures in power electronic converter systems", IEEE Trans. Power Electron., vol. 30, no. 5, pp. 2517-2533, 2015.
[http://dx.doi.org/10.1109/TPEL.2014.2373390]
[http://dx.doi.org/10.1109/TPEL.2014.2373390]
Article Metrics
18
1