Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Review Article

Recent Patents on Third Generation Bearing Testing Machine

Author(s): Yanling Zhao* and Huanqing Zhang

Volume 16, Issue 4, 2022

Published on: 09 December, 2021

Article ID: e251121198307 Pages: 18

DOI: 10.2174/1872212115666211125103745

Price: $65

Abstract

Background: Bearing testing machine is the key equipment for bearing design, theoretical research and improvement, and it plays an important role in the performance of bearing life, fatigue, vibration and working temperature. With the requirements of aerospace, military equipment, automobile manufacturing and other industrial fields of the bearing are becoming higher and higher. There is an urgent need for high-precision and high-efficiency bearing testing machines to monitor and analyze the performance of bearings.

Objective: By analyzing the recent patents, the characteristics and existing problems of the current bearing testing machine are summarized to provide references for the development of bearing test equipment in the future.

Methods: This paper reviews various representative patents related to the third generation bearing testing machines.

Results: Although the structure of bearing testing machines is different, the main problems in the structure and design principle of bearing testing machine have been summarized and analyzed, and the development of trend and direction of the future bearing testing machine have been discussed.

Conclusion: Bearing testing machines for health monitoring of bearing life cycle is of great significance. The current bearing testing machine has basically achieved the monitoring and analysis However, due to the emergence of new types of bearings, further improvement is still needed. With the development of testing technology towards intelligent and big data-driven direction, bearing testing machine is moving towards the type of cloud computing and large-scale testing.

Keywords: Testing machine, bearing, working condition, testing quality, measuring precision, future development.

Graphical Abstract

[1]
R.X. Yu, H.H. Sun, and J. Geng, "Research on quality inspec-tion and sorting on-line system for bearing steel ball", MATEC Web of Conferences, vol. 31, 2015.
[http://dx.doi.org/10.1051/matecconf/20153103009]
[2]
P.B. Neal, "Review Paper 4: Basic principles of bearing test-ing-machine design", Proc.- Inst. Mech. Eng., vol. 182, no. 7, pp. 24-32, 1967.
[3]
X.L. Li, Y.L. Zhang, M.L. Cao, Y.P. Zhang, S.G. Lu, and J.P. Li, Survey of accelerated bearing life tester and its technique of rolling bearing., vol. 3. Engineering & Test, 2007.
[4]
C.M. Li, Some views of technological development for present testing machine trade., vol. 2. Engineering & Test, 2008.
[5]
M.M. Khonsari, and E.R. Booser, Applied tribology: bearing design and lubrication., John Wiley & Sons, 2017.
[http://dx.doi.org/10.1002/9781118700280]
[6]
B. Fang, J. Zhang, K. Yan, J. Hong, and W. Yu, A compre-hensive study on the speed-varying stiffness of ball bearing under different load conditionsMechanism Mach..ine, vol. 136, pp. 1-13, 2019.
[http://dx.doi.org/10.1016/j.mechmachtheory.2019.02.012]
[7]
P. Cambron, A. Tahan, C. Masson, and F. Pelletier, "Bearing temperature monitoring of a Wind turbine using physics-based model", J. Qual. Mainten. Eng., vol. 23, no. 4, pp. 479-488, 2017.
[http://dx.doi.org/10.1108/JQME-06-2016-0028]
[8]
B. Li, J. Sun, S. Zhu, Y. Fu, X. Zhao, H. Wang, and G. Zhu, "Thermohydrodynamic lubrication analysis of misaligned journal bearing considering the axial movement of journal", Tribol. Int., vol. 135, pp. 397-407, 2019.
[http://dx.doi.org/10.1016/j.triboint.2019.03.031]
[9]
H.Z. Zhao, L. Ma, and W. Li, "Research on the pretension of the NGW reducer tumbler bearing", Appl. Mech. Mater., vol. 29-32, pp. 275-280, 2010.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.29-32.275]
[10]
S.F. Masri, R.K. Miller, M.I. Traina, and T.K. Caughey, "De-velopment of bearing friction models from experimental measurements", J. Sound Vibrat., vol. 148, no. 3, pp. 455-475, 1991.
[http://dx.doi.org/10.1016/0022-460X(91)90478-3]
[11]
Y. Peng, J. Cai, T. Wu, G. Cao, N. Kwok, S. Zhou, and Z. Peng, "Online wear characterisation of rolling element bearing using wear particle morphological features", Wear, vol. 430-431, pp. 369-375, 2019.
[http://dx.doi.org/10.1016/j.wear.2019.05.005]
[12]
R.J. Trippett, and D.F. Li, High-speed floating-ring bearing test and analysis., 1984.
[http://dx.doi.org/10.1080/05698198408981547]
[13]
C. Dara, and H. Keith, "A test apparatus and facility to identi-fy the rotordynamic coefficients of high-speed hydrostatic bearings", J. Tribol., vol. 116, no. 2, pp. 337-343, 1994.
[http://dx.doi.org/10.1115/1.2927226]
[14]
P.M. Lugt, "A review on grease lubrication in rolling bear-ings", Tribol. Trans., vol. 52, no. 4, pp. 470-480, 2009.
[http://dx.doi.org/10.1080/10402000802687940]
[15]
T.I. Liu, J. Lee, P. Singh, and G. Liu, "Real-time recognition of ball bearing states for the enhancement of precision, quali-ty, efficiency, safety, and automation of manufacturing", Int. J. Adv. Manuf. Technol., vol. 71, no. 5-8, pp. 809-816, 2013.
[http://dx.doi.org/10.1007/s00170-013-5497-5]
[16]
T. Williams, X. Ribadeneira, S. Billington, and T. Kurfess, "Rolling element bearing diagnostics in run-to-failure lifetime testing", Mech. Syst. Signal Process., vol. 15, no. 5, pp. 979-993, 2001.
[http://dx.doi.org/10.1006/mssp.2001.1418]
[17]
N. Hartman, and D. Ashbaugh, "Automation in Fatigue and Fracture: Testing and Analysis, C", In: A Sampling of Mechanical Test Automation Methodologies Used in a Basic Research Laboratory (West Conshohocken., ASTM International: West Conshohocken, PA, 1994.
[18]
M.L. Cao, X.C. Liu, X.l. Li, Y.L. Zhang, and J.P. Li, "Accel-erated bearing life tester (ABLT-6) for bearings with outer ring rotating", Bearing, vol. 1, pp. 50-52, 2009.
[19]
J. Xiang, and Y. Zhong, "A novel personalized diagnosis method-ology using numerical simulation and an intelligent method to detect faults in a shaft", Appl. Sci. (Basel), vol. 6, no. 1, p. 414, 2016.
[http://dx.doi.org/10.3390/app6120414]
[20]
B. Yang, Y. Lei, F. Jia, and S. Xing, "An intelligent fault diag-nosis approach based on transfer learning from laboratory bearings to locomotive bearings", Mech. Syst. Signal Process., vol. 122, pp. 692-706, 2019.
[http://dx.doi.org/10.1016/j.ymssp.2018.12.051]
[21]
Z.M. Zhao, F. Ji, Y.S. Guan, J. Xu, and X.Y. Yuan, "Meth-od and experiment of temperature collaborative monitoring based on characteristic points for tilting pad bearings", Tribology International, vol. 114, pp. 77-83, 2017.
[http://dx.doi.org/10.1016/j.triboint.2017.04.021]
[22]
C. Topkaya, and J.A. Yura, "Test method for determining the shear modulus of elastomeric bearings", J. Struct. Eng., vol. 128, no. 6, pp. 797-805, 2002.
[http://dx.doi.org/10.1061/(ASCE)0733-9445(2002)128:6(797)]
[23]
H.L. Qin, and C. Yang, "Experimental analysis on friction-induced vibration of water-lubricated bearings in a submarine propulsion system", Ocean Eng., vol. 203, no. 1, 2020.
[24]
S.B. Glavatskih, "A method of temperature monitoring in fluid film bearings", Tribol. Int., vol. 37, no. 2, pp. 143-148, 2004.
[http://dx.doi.org/10.1016/S0301-679X(03)00050-1]
[25]
N. Tandon, "A comparison of some vibration parameters for the condition monitoring of rolling element bearings", Measurement, vol. 12, no. 3, pp. 285-289, 1994.
[http://dx.doi.org/10.1016/0263-2241(94)90033-7]
[26]
N. Tandon, and B.C. Nakra, "Vibration and acoustic monitor-ing techniques for the detection of defects in rolling element bearings-a review", The shock and vibration digest,, vol. 24, no. 3, pp. 3-11, 1991.
[27]
T. Miyachi, and K. Seki, "An investigation of the early detec-tion of defects in ball bearings using vibration monitoring, practical limit of detectability and growth speed of defects", Proceedings of the International Conference of Rotordynam-ics, 1986
[28]
P.D. McFadden, and J.D. Smith, "Vibration monitoring of rolling element bearings by the high-frequency resonance technique—a review", Tribol. Int., vol. 17, no. 1, pp. 3-10, 1984.
[http://dx.doi.org/10.1016/0301-679X(84)90076-8]
[29]
H. Prashad, and S. Biswas, "Diagnostic monitoring of rolling-element bearings by high-frequency resonance technique", ASLE Trans., vol. 28, no. 4, pp. 439-448, 1985.
[http://dx.doi.org/10.1080/05698198508981641]
[30]
P.F.J. Burgess, Antifriction bearing fault detection using enve-lope detection. Trans. Instn. Prof. Engrs., vol. 15.New Zea-land, 1988, no. 2, pp. 77-82.
[31]
L. Yuan, and B. Zhang, "A wind turbine bearing temperature warning method and device", C.N. patent 111,623,905..
[32]
X. Guo, L. Chen, and C. Shen, "Hierarchical adaptive deep convolution neural network and its application to bearing fault diagnosis", Measurement, vol. 93, pp. 490-502, 2016.
[http://dx.doi.org/10.1016/j.measurement.2016.07.054]
[33]
W. Lu, B. Liang, Y. Cheng, D. Meng, J. Yang, and T. Zhang, "Deep model based domain adaptation for fault diagnosis", IEEE Trans. Ind. Electron., vol. 64, no. 3, pp. 2296-2305, 2017.
[http://dx.doi.org/10.1109/TIE.2016.2627020]
[34]
S. Pan, and Q. Yang, "A survey on transfer learning", IEEE Trans. Knowl. Data Eng., vol. 22, no. 10, pp. 1345-1359, 2009.
[http://dx.doi.org/10.1109/TKDE.2009.191]
[35]
C. Tan, F. Sun, T. Kong, W. Zhang, C. Yang, and C. Liu, A survey on deep transfer learningInt. Conf. Artif. Neural Netw., Springer: Cham, Switzerland, 2018.
[36]
E. Tzeng, J. Hoffman, N. Zhang, K. Saenko, and T. Darrell, Deep domain confusion: Maximizing for domain invari-ance.
[37]
Y. Ganin, E. Ustinova, H. Ajakan, P. Germain, H. Larochelle, F. Laviolette, M. March, and V. Lempitsky, "Domain-adversarial training of neural networks", J. Mach. Learn. Res., vol. 17, no. 59, pp. 1-35, 2016.
[38]
F.Y. Cong, C. Jin, and Y.N. Pan, "Kolmogorov-Smirnov test for rolling bearing performance degradation assessment and prognosis", J. Vib. Control, vol. 17, no. 9, pp. 1337-1347, 2010.
[http://dx.doi.org/10.1177/1077546310384003]
[39]
M. Kadnár, J. Kadnár, S. Hloch, J. Valíček, and J. Rusnák, "The design and verification of experimental machine for real journal bearings testing", Technical Gazette, vol. 18, no. 1, pp. 95-98, 2011.
[40]
Y.S. Chen, and L.H. Chuong, "Efficiency improvement of the highly accelerated life testing system by using multiple ham-mers", J. Mech. Sci. Technol., vol. 28, no. 12, pp. 4815-4831, 2014.
[http://dx.doi.org/10.1007/s12206-014-1102-6]
[41]
A. Quadir, "Design and development of fully reversed axial loading fatigue testing machine", International Journal of Ad-vances In Engineering & Scientific Research, vol. 28, no. 12, pp. 4815-4831, 2014.
[42]
S.S. Li, B. Fu, Q.Y. Zhang, P. Zhu, X.F. Lu, D.K. Ma, and K. Yuan, "Cryogenic performance test platform for the gas bear-ings of helium turbine expanders", IOP Conf. Series Mater. Sci. Eng., vol. 755, no. 1, 2020.
[43]
J. Sikora, "Bearing testing machine with rotating load vector", Internal Combustion Engines., vol. 1-2, pp. 246-252, 2002.
[44]
K.K. Alaneme, "Design of a cantilever - type rotating bending fatigue testing machine", J. Miner. Mater. Charact. Eng., vol. 10, no. 11, pp. 1027-1039, 2011.
[http://dx.doi.org/10.4236/jmmce.2011.1011078]
[45]
N.M. Franchek, and D.W. Childs, "Experimental test results for four high-speed, high-pressure, orifice-compensated hy-brid bearings", J. Tribol., vol. 116, no. 1, pp. 147-153, 1994.
[http://dx.doi.org/10.1115/1.2927031]
[46]
X. Li, W. Zang, Q. Ding, and J.Q. Sun, "Multi-Layer domain adaptation method for rolling bearing fault diagnosis", Signal Processing, vol. 157, pp. 180-197, 2019.
[http://dx.doi.org/10.1016/j.sigpro.2018.12.005]
[47]
R.R. Cui, and Y.Y. Ren, The design of high speed multiplex data transmission system based on single chip microcomput-er.Mobimedia, vol. 2728. 2020.
[48]
Y.P. Chen, H.L. Zhang, and R.B. Zhou, "Vibration signal acquisition system based on C8051 series single chip micro-computer", Solid State Technol., vol. 63, no. 5, 2020.
[49]
T. Hagemann, P. Pfeiffer, and H. Schwarze, "Measured and predicted operating characteristics of a tilting-pad journal bearing with jacking-oil device at hydrostatic, hybrid, and hy-drodynamic operation", Lubricants, vol. 6, no. 3, p. 81, 2018.
[http://dx.doi.org/10.3390/lubricants6030081]
[50]
J.P. Shao, G.D. Liu, X.D. Yu, Y.Q. Zhang, X.L. Meng, and H. Jiang, "Effect of recess depth on lubrication performance of annular recess hydrostatic thrust bearing by constant rate flow", Ind. Lubr. Tribol., vol. 70, no. 1, pp. 68-75, 2018.
[http://dx.doi.org/10.1108/ILT-03-2017-0066]
[51]
J.P. Shao, L.F. Xu, and G.T. Sun, "Analysis on static pressure bearing seal characteristics of guide sleeve of electro-hydraulic servo cylinder", Int. J. Plant Eng. Manag., vol. 24, no. 3, pp. 140-156, 2019.
[52]
Y.H. Zhou, Z.X. Tian, H.X. Wang, and W. He, "A new type electro-spindle driven testing machine for double-ring rotating rearings", Bearing, vol. 5, pp. 23-26, 1995.
[53]
R. Sawamura, S. Ikenaga, and A. Matsubara, "Development of dynamic loading device for rotating spindle of machine tools", Key Eng. Mater., vol. 523-524, pp. 544-549, 2012.
[http://dx.doi.org/10.4028/www.scientific.net/KEM.523-524.544]
[54]
D. Zhou, L. Wu, and Y. Xiao, "Comprehensive measurement and evaluation system of high-speed motorized spindle", Front. Mech. Eng., vol. 6, pp. 263-269, 2011.
[http://dx.doi.org/10.1007/s11465-011-0217-z]
[55]
W. Armstrong, K.D. Reisinger, and W.K. Smith, "Evaluation of CIR-whirlwind wheelchair and service provision in Af-ghanistan", Disabil. Rehabil., vol. 29, no. 11-12, pp. 935-948, 2007.
[http://dx.doi.org/10.1080/09638280701240615] [PMID: 17577728]
[56]
S.M. Banavasi, K.S. Ravishankar, and P.S. Naik, "A review on design and fabrication of fatigue testing machine", Int. J. Novel Res. Develop., vol. 3, no. 5, pp. 5-14, 2018.
[57]
K. Wang, L. Zhang, Y. Le, S. Zheng, B. Han, and Y. Jiang, "Optimized differential dslf-inductance displacement sensor for magnetic bearings: Design, Analysis and experiment", IEEE Sens. J., vol. 17, no. 14, pp. 4378-4387, 2017.
[http://dx.doi.org/10.1109/JSEN.2017.2710135]
[58]
N.G. Dagalakis, and D.R. Myers, "Adjustment of robot joint gear backlash using the robot Joint test excitation technique", Int. J. Robot. Res., vol. 4, no. 2, pp. 65-79, 1985.
[http://dx.doi.org/10.1177/027836498500400206]
[59]
N. Rajeev, T. Sudhir, and M Smita, "Development of rubber wheel abration testing machine for estimation of three boddy abasive wear of automobile components", International Journal on Design & Manufacturing Technologies, vol. 9, no. 1, 2015.
[60]
L. Eren, T. Ince, and S. Kiranyaz, "A generic intelligent bear-ing fault diagnosis system using compact adaptive 1d CNN classifier", J Sign Process Syst, vol. 91, pp. 179-189, 2019.
[http://dx.doi.org/10.1007/s11265-018-1378-3]
[61]
A. Rai, and S.H. Upadhyay, "Intelligent bearing performance degradation assessment and remaining useful life prediction based on self-organising map and support vector regression. Proceedings of the institution of mechanical engineers, Part C", J. Mech. Eng. Sci., vol. 232, no. 6, pp. 1118-1132, 2018.
[http://dx.doi.org/10.1177/0954406217700180]
[62]
B.X. Li, W. Zhang, and Q. Ding, "Cross-Domain fault diagno-sis of rolling element bearings using deep generative neural networks", Transactions on Industrial Electronics, vol. 66, no. 7, pp. 5525-5534, 2019.
[http://dx.doi.org/10.1109/TIE.2018.2868023]
[63]
M. Chalouli, N. Berrached, and M. Denai, "Intelligent health monitoring of machine bearings based on feature extraction", J. Fail. Anal. Prev., vol. 17, pp. 1053-1066, 2017.
[http://dx.doi.org/10.1007/s11668-017-0343-y]
[64]
Q.H. Yang, and C.J. Li, A kind of general roller bearing test-ing machine. C. N. patent 109,855,872.
[65]
J. Mu, F. Ma, Q.C. Yu, H.J. An, Z. Yan, J.Y. Luan, H.L. Sun, Z.Y. Wang, M.L. Yang, M.H. Sun, X.Y. Zhang, D.P. Zhang, H. Li, and L.C. Bian, Bearing testing machine. C. N. patent 109,141,879
[66]
Z.C. Sun, T.X. Yu, W.M. Cui, and B.F. Song, A kind of fric-tion wear testing machine.C. N. patent 207,379,856.
[67]
S.Z. Guo, Y.M. Jiang, X.J. Mao, R.H. Mei, T.M. Gong, B.Y. She, X.L. Qi, and G.Q. Chen, A kind of lubricants perfor-mance test device.C. N. patent 104,950,098.
[68]
J.Q. Huang, Bath lubrication bearing tester.C. N. patent 104,849,047.
[69]
W.G. Li, Z. Li, X.Z. Zhao, G. Zhao, Y.Q. Zhuang, D.Z. Zheng, X. Lin, J.K. Cui, H. Chen, and J.G. Zhang, Fault di-agnosis and life testing machine for flexible precision thin-wall bearing. U. S. patent 10,712,237.
[70]
W.H. Zhao, T. He, and J.T. Li, Joint bearing life testing ma-chine.C. N. patent 205,981,688.
[71]
H.M. Wu, J. Wang, X. Yang, and C. Ma, Bearing testing machine and loading device thereof.C. N. patent 205,981,692.
[72]
Z.X. Zheng, Y.K. Zheng, and L.T. Zheng, Bearing dynamic characteristics testing machine. W. O. patent 2,020,034,338.
[73]
K. Kobori, Testing device of bearing for wind turbin.J. P. patent 2,018,155,574.
[74]
W. Zhang, L. Wang, Y. Sun, H. Qin, D. D. Qin, and Z. J. Zhao, Bearing tester. C.N.208076154.
[75]
H. Wang, Z.W. Yang, S.J. Li, and X.C. Zhou, A kind of com-bination bearing testing machine.C.N.209131972.
[76]
W.J. Rong, W.C. Wang, P. Li, and L.J. Guo, Bearing tester.C.N. 206593858.
[77]
Q.H. Yang, G.H. Huang, and C.J. Li, Subway bearing tester.C.N. 106092579.
[78]
J.N. Gao, and Z.C. Zhang, Bearing testing machine.C.N. 205262746.
[79]
W.H. Zhao, B.H. Li, C. Ma, Y.M. Wu, Y. Fan, Q. Ma, H.P. Zhang, and D.F. Yang, Robot joint speed reducer base bear-ing test tool and testing machine.C.N. 110196163.
[80]
Y.L. Yang, Z.S. Wang, and X.P. Liu, Joint bearing testing machine is combined in the system support of oscillating oil cylinder formula helicopter tail rotor.C.N. 105136459.
[81]
H.F. Yang, X.G. Meng, J.K. Yue, and H.C. Zhang, Cylindri-cal roller bearing without inner ring life test machine.C.N. 209639967.
[82]
Y.B. Lee, B.S. Choe, K. Kwak, J.K. Lee, and O.S. Seo, Bear-ing test apparatus for testing behavior of the bearing.U.S.10247638
[83]
R.J. Wei, W. Ma, Z.L. Zhang, and X.G. Yang, A kind of com-bination load movable joint bearing tester.C.N. 106769038.
[84]
F.W. Gao, L.H. Zang, J.Y. Sun, Y.B. Hu, T.L. Yang, Z.G. Li, W.L. Feng, and X. Zhang, A kind of elevator traction sheave external tooth bearing tester.C.N. 209459899.
[85]
W.G. Li, Z. Li, H. Chen, Z.Y. Liu, W.B. Huang, X.J. Liu, Q.Q. Liu, and C.B. Wang, A kind of multifunction bearing testing machine.C.N. 110196164.
[86]
Q.H. Yang, and C.J. Li, A kind of engineering pivoting sup-port bearing testing machine.C.N. 209280312.
[87]
Y.B. Lee, B. Choe, and J.K. Lee, Bearing test apparatus for testing durability of bearing.U.S. 9714883.
[88]
T. Teramoto, S. Matsomoto, and T. Murauchi, Bearing test-ing machine.U.S. 10203266.
[89]
Q.H. Yang, and C.J. Li, New spindle bearing testing ma-chines.C.N. 209280313.
[90]
T. Sakaguchi, and T. Tsutsui, Bearing device vibration anal-ysis method, bearing device vibration analyzer, and rolling bearing condition monitoring system.U.S., .10337958 2015
[91]
K. Daisuke, and O Koichiro, Method and system for diagnos-ing abnormality of bearing.J.P. 2019184540.
[92]
S. Zhang, and J. Li, Method for fault diagnosis of an aero-engine rolling bearing based on random forest of power spec-trum entropy.U.S. 20200200648.
[93]
K. Masahiko, and M. Kawabata, General-purpose deteriora-tion curve creation method and machine life prediction meth-od, and general-purpose deterioration curve creation program and machine life prediction program. J.P. 5990729.
[94]
Y. Yang, H. Xu, and H. Li, Intelligent rolling contact fatigue testing system and testing method therefor. U.S.20200049603
[95]
J.E. Judd, Multiple discriminate analysis and data integration of vibration in rotation machinery.U.S. 6763312.
[96]
K. Naoya, N. Hasegawa, and T. Fujita, Method for evaluating performance of rolling component.J.P. 2019207157.
[97]
A. Thomson, Method and data processing device for severity assessment of bearing defects using vibration energy.U.S. 9989439.
[98]
J.W. Wang, H.L. Li, H.D. Wang, and B.S. Xu, "Rolling contact fatigue testing machine status", Eng. Test, vol. 51, no. 3, pp. 1-5, 2011.
[99]
H. Kweon, and S. Choi, "Development of a new UTM (uni-versal testing machine) systerm for the nano/micro in-process measurement", Intern. J. Modern Physics, vol. 20, no. 25, pp. 4432-4438, 2006.
[100]
S.A. Gala, "A review of fatigue testing machines", Engin. J. Qatar Uni., vol. 3, pp. 55-69, 1990.
[101]
Z.F. Huang, Development status and trend of domestic testing machines: After galloping for twenty years, Sun Renewing a new chapter., 2016.
[102]
T.J. George, M.H. Jeremy, H.M. Shen, N. Theodore, and C.J. Cross, "Development of a novel vibration-based fatigue test-ing methodology", Int. J. Fatigue, vol. 26, no. 5, pp. 477-486, 2004.
[http://dx.doi.org/10.1016/j.ijfatigue.2003.10.012]
[103]
R. Bardenheier, and G. Rogers, "Dynamic impact testing with servohydraulic testing machines", J. Phys. IV France, vol. 134, pp. 393-399, 2006.
[http://dx.doi.org/10.1051/jp4:2006134107]
[104]
D. Omacht, Z. Kubanek, and R. Dolezal, "Development of testing machines and equipment for small punch testing, pro-posals for improvement of CWA 15627", Key Eng. Mater., vol. 734, pp. 237-248, 2017.
[http://dx.doi.org/10.4028/www.scientific.net/KEM.734.237]
[105]
D. Fabre’gue, N. Andre´, M. Coulombier, J.P. Raskin, and T. Pardoen, "Multipurpose nanomechanical testing machines re-vealing the size-dependent strength and high ductility of pure aluminium submicron films", Micro Nano Lett., vol. 2, no. 1, pp. 13-16, 2007.
[http://dx.doi.org/10.1049/mnl:20065068]
[106]
Y. Kang, H. Yin, and C. Berger, "Test Your Self-Driving Al-gorithm: An overview of publicly available driving datasets and virtual testing environments", IEEE Trans. Intell. Veh., vol. 4, no. 2, pp. 171-185, 2019.
[http://dx.doi.org/10.1109/TIV.2018.2886678]
[107]
S. Gudlavalleti, B.P. Gearing, and L. Anand, "Flexure-based micro-mechanical testing machines", Exp. Mech., vol. 45, pp. 412-419, 2005.
[http://dx.doi.org/10.1007/BF02427988]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy