Abstract
Background: Determination of environmental pollutants is important due to their harmful effects on the health of living organisms. However, direct measurement of many of these pollutants is not possible due to their low concentrations, which necessitates the need for sample preparation methods. One of the rapid and simple sample preparation methods is the Air-Agitated Liquid-Liquid Microextraction (AALLME) method, which requires toxic organic solvents that can lead to environmental pollution. Therefore, finding green solvents like Deep Eutectic Solvents (DESs) to replace them can be investigated.
Methods: A novel Deep Eutectic Solvent (DES) was synthesized from a combination of choline chloride and 2-phenylethanol with a molar ratio of 1:4, and it was examined using FT-IR analysis. This solvent was used in an AALLME method for measuring copper and cadmium heavy metal ions in complex real samples with Flame Atomic Absorption Spectroscopy (FAAS).
Results: The influential parameters of this method, such as solution pH (5.4), extraction cycles (12), and extraction solvent volume (440 μL), were optimized utilizing central composite design (CCD). Underneath the optimized circumstances, the detection limits for Cu2+ and Cd2+ were 0.14 and 0.09 ng mL-1, and the linear dynamic range was 0.47-50.0 and 0.32-22.5 ng mL-1, respectively. The preconcentration factors for these cations were 139.7 and 133.4, respectively.
Conclusion: Combining this novel green solvent and rapid sample preparation method for the preconcentration and determination of the studied heavy metal ions has shown promising results in terms of enrichment factors and detection limit values.
Graphical Abstract
[http://dx.doi.org/10.1016/j.jksus.2021.101653]
[http://dx.doi.org/10.2174/0115734110269897231020065609]
[http://dx.doi.org/10.2174/011574888X260118230927050143] [PMID: 37861050]
[http://dx.doi.org/10.1016/j.mam.2005.07.013] [PMID: 16125765]
[http://dx.doi.org/10.1289/EHP108] [PMID: 28248635]
[http://dx.doi.org/10.3390/toxics10080472] [PMID: 36006151]
[http://dx.doi.org/10.1016/j.microc.2020.105828]
[http://dx.doi.org/10.1016/j.foodchem.2018.12.114] [PMID: 30711095]
[http://dx.doi.org/10.1016/j.microc.2019.104319]
[http://dx.doi.org/10.1016/B978-0-12-823334-4.00006-0]
[http://dx.doi.org/10.1016/j.trac.2021.116398]
[http://dx.doi.org/10.1080/00032719.2019.1643358]
[http://dx.doi.org/10.1016/j.trac.2019.115651]
[http://dx.doi.org/10.1016/j.molliq.2021.115617]
[http://dx.doi.org/10.1016/j.foodchem.2022.134778] [PMID: 36334458]
[http://dx.doi.org/10.3390/polym13030447] [PMID: 33573280]
[http://dx.doi.org/10.1016/j.molliq.2022.120285]
[http://dx.doi.org/10.1016/j.foodchem.2021.129237] [PMID: 33618090]
[http://dx.doi.org/10.1016/j.talanta.2019.120485] [PMID: 31816735]
[http://dx.doi.org/10.1080/00032719.2019.1598425]
[http://dx.doi.org/10.1016/j.foodchem.2021.131138] [PMID: 34555705]
[http://dx.doi.org/10.1016/j.jfca.2022.105107]
[http://dx.doi.org/10.3906/kim-1604-76]
[http://dx.doi.org/10.1080/03067319.2023.2262393]
[http://dx.doi.org/10.1016/j.foodcont.2007.07.012]
[http://dx.doi.org/10.2298/JSC180606093P]
[http://dx.doi.org/10.1002/aoc.4012]
[http://dx.doi.org/10.1007/s10661-021-09389-0] [PMID: 34508274]
[http://dx.doi.org/10.1007/s11356-017-9863-y] [PMID: 28875392]
[http://dx.doi.org/10.1016/j.jfp.2023.100102] [PMID: 37172905]
[http://dx.doi.org/10.1016/j.molliq.2023.122207]
[http://dx.doi.org/10.1016/j.jfca.2022.105125]
[http://dx.doi.org/10.1016/j.microc.2021.105974]