Abstract
This paper focuses on better understanding the Indian Electric Vehicle (EV) market scenario based on battery and motor specifications. Electric two-wheelers, three-wheelers, and fourwheelers have different challenges and requirements at the efficient design level. This paper also provides a comprehensive review of brushed DC motors, brushless DC (BLDC) motors, permanent magnet synchronous motors (PMSM), induction motors (IM), switched reluctance motors (SRM), and flux switching motors (FSM) for EV application.
Background: The market for EVs is growing rapidly in India as a developing country, and users are looking forward to highly efficient and cost-effective EVs due to the pollution and unavailability of petroleum.
Objective: The main objective of this paper is to provide the right choice of EV motor based on vehicle type, driving cycle, and user requirement.
Method: This paper comprehensively reviews DC and AC motor drive systems for EV application.
Conclusion: Nowadays, manufacturing is mainly inclined towards the BLDC, PMSM, and IM. In contrast, SRM and FSM are in the early stage of development and are mainly used by the researcher. A brushed DC motor is not too famous due to its high running cost, frequent maintenance requirements, and comparatively bulky size.
Graphical Abstract
[1]
D. Kim, H. Hwang, S. Bae, and C. Lee, "Analysis and design of a double-stator flux-switching permanent magnet machine using ferrite magnet in hybrid electric vehicles", IEEE Trans. Magn., vol. 52, no. 7, pp. 1-4, 2016.
[http://dx.doi.org/10.1109/TMAG.2016.2532360]
[http://dx.doi.org/10.1109/TMAG.2016.2532360]
[2]
C. Feng, S. Cui, and C. Kang, "Performance analysis of double-stator starter generator for the hybrid electric vehicle", 2004 12th Symp. Electromagn. Launch Technol., p. vol. 41, no. 1, pp. 499-502, 2004, .
[3]
K.T. Chau, C.C. Chan, and Chunhua Liu, "Overview of permanent-magnet brushless drives for electric and hybrid electric vehicles", IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2246-2257, 2008.
[http://dx.doi.org/10.1109/TIE.2008.918403]
[http://dx.doi.org/10.1109/TIE.2008.918403]
[4]
M.S. Vicatos, and J.A. Tegopoulos, "A doubly-fed induction machine differential drive model for automobiles", IEEE Trans. Energ. Convers., vol. 18, no. 2, pp. 225-230, 2003.
[http://dx.doi.org/10.1109/TEC.2003.811732]
[http://dx.doi.org/10.1109/TEC.2003.811732]
[5]
M. Schael, P. Spichartz, M. Rehl, and C. Sourkounis, "Electric differential for electric vehicles using doubly-fed induction motors", IECON 2013-39th Annual Conference of the IEEE Industrial Electronics Society, Nov 10-13, 2013, Vienna, Austria, p. pp. 4618- 4623, 2013, .
[http://dx.doi.org/10.1109/IECON.2013.6699880]
[http://dx.doi.org/10.1109/IECON.2013.6699880]
[6]
V.P. Dhote, M.M. Lokhande, A. Agrawal, and B. Hemanth Kumar, "Mechanical coupling of two induction motor drives for the applications of an electric-drive vehicle system", 2017 Natl. Power Electron. Conf. NPEC, Dec 18-20, 2018, Pune, India, p. pp. 330-333, 2018, .
[7]
D. Casadei, M. Mengoni, G. Serra, A. Tani, and L. Zarri, "A control scheme with energy saving and DC-link overvoltage rejection for induction motor drives of electric vehicles", IEEE Trans. Ind. Appl., vol. 46, no. 4, pp. 1436-1446, 2010.
[http://dx.doi.org/10.1109/TIA.2010.2049627]
[http://dx.doi.org/10.1109/TIA.2010.2049627]
[8]
J. Faiz, M.B.B. Sharifian, A. Keyhani, A.B. Proca, and A.B. Proca, "Sensorless direct torque control of induction motors used in electric vehicle", IEEE Trans. Energ. Convers., vol. 18, no. 1, pp. 1-10, 2003.
[http://dx.doi.org/10.1109/TEC.2002.805220]
[http://dx.doi.org/10.1109/TEC.2002.805220]
[9]
G. Gallegos-López, P.C. Kjaer, and T.J.E. Miller, "A new sensorless method for switched reluctance motor drives", IEEE Trans. Ind. Appl., vol. 34, no. 4, pp. 832-840, 1998.
[http://dx.doi.org/10.1109/28.703987]
[http://dx.doi.org/10.1109/28.703987]
[10]
P. Zheng, Y. Liu, Y. Wang, and S. Cheng, "Magnetization analysis of the brushless DC motor used for hybrid electric vehicle", IEEE Trans. Magn., vol. 41, no. 1, pp. 522-524, 2005.
[11]
J. Fan, C. Zhang, Z. Wang, Y. Dong, C.E. Nino, A.R. Tariq, and E.G. Strangas, "Thermal analysis of permanent magnet motor for the electric vehicle application considering driving duty cycle", IEEE Trans. Magn., vol. 46, no. 6, pp. 2493-2496, 2010.
[http://dx.doi.org/10.1109/TMAG.2010.2042043]
[http://dx.doi.org/10.1109/TMAG.2010.2042043]
[12]
B.V.R. Kumar, and K.S. Kumar, "Design of a new dual rotor radial flux BLDC motor with halbach array magnets for an electric vehicle", 2016 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Dec 14-17, 2016, Trivandrum, India, p. pp. 1-5, 2016, .
[http://dx.doi.org/10.1109/PEDES.2016.7914552]
[http://dx.doi.org/10.1109/PEDES.2016.7914552]
[13]
N. Hashernnia, and B. Asaei, "Comparative study of using different electric motors in the electric vehicles", Proceedings of the 2008 International Conference on Electrical Machines, Sept 6-9, 2008, Vilamoura, Portugal, p. pp. 1-5, 2008, .
[14]
J.R. Riba, C. López-Torres, L. Romeral, and A. Garcia, "Rare-earth-free propulsion motors for electric vehicles: A technology review", Renew. Sustain. Energy Rev., vol. 57, pp. 367-379, 2016.
[http://dx.doi.org/10.1016/j.rser.2015.12.121]
[http://dx.doi.org/10.1016/j.rser.2015.12.121]
[15]
B. Sarlioglu, C.T. Morris, D. Han, and S. Li, "Driving toward accessibility: A review of technological improvements for electric machines, power electronics, and batteries for electric and hybrid vehicles", IEEE Ind. Appl. Mag., vol. 23, no. 1, pp. 14-25, 2017.
[http://dx.doi.org/10.1109/MIAS.2016.2600739]
[http://dx.doi.org/10.1109/MIAS.2016.2600739]
[16]
J.D. Widmer, R. Martin, and M. Kimiabeigi, "Electric vehicle traction motors without rare earth magnets", Sustainable Mater. Technol., vol. 3, pp. 7-13, 2015.
[http://dx.doi.org/10.1016/j.susmat.2015.02.001]
[http://dx.doi.org/10.1016/j.susmat.2015.02.001]
[17]
S. Drid, M.S. Nait-Said, M. Tadjine, A. Makouf, H. Arioui, R. Merzouki, and H.A. Abbassi, "Nonlinear control of the doubly fed induction motor with copper losses minimization for electrical vehicle", AIP Conf. Proc, p. vol. 1019, pp. 339-345, 2008, .
[http://dx.doi.org/10.1063/1.2953002]
[http://dx.doi.org/10.1063/1.2953002]
[18]
Y. Chen, and Z. Lu, "Study on control of an two hub-motor electric vehicle", Proceedings of the 2010 IEEE International Conference on Information and Automation, Jun 20-23, 2010, Harbin, China, p. vol. 1, pp. 627-632, 2010, .
[http://dx.doi.org/10.1109/ICINFA.2010.5512411]
[http://dx.doi.org/10.1109/ICINFA.2010.5512411]
[19]
M. Zeraoulia, M.E.H. Benbouzid, and D. Diallo, "Electric motor drive selection issues for HEV propulsion systems: A comparative study", IEEE Trans. Vehicular Technol., vol. 55, no. 6, pp. 1756-1764, 2006.
[http://dx.doi.org/10.1109/TVT.2006.878719]
[http://dx.doi.org/10.1109/TVT.2006.878719]
[20]
M. Yildirim, M. Polat, and H. Kurum, "A survey on comparison of electric motor types and drives used for electric vehicles", 16th Int. Power Electron. Motion Control Conf. Expo. PEMC 2014, Sept 21- 24, 2014, Antalya, Turkey, p. pp. 218-223, 2014, .
[http://dx.doi.org/10.1109/EPEPEMC.2014.6980715]
[http://dx.doi.org/10.1109/EPEPEMC.2014.6980715]
[21]
X.D. Xue, K.W.E. Cheng, and N.C. Cheung, "Selection of electric motor drives for electric vehicles", Australas. Univ. Power Eng. Conf. AUPEC, vol. 2008, pp. 1-6, 2008.
[22]
W. Enang, and C. Bannister, "Modelling and control of hybrid electric vehicles (A comprehensive review)", Renew. Sustain. Energy Rev., vol. 74, pp. 1210-1239, 2017.
[http://dx.doi.org/10.1016/j.rser.2017.01.075]
[http://dx.doi.org/10.1016/j.rser.2017.01.075]
[23]
A.M. Lulhe, and T.N. Date, "A technology review paper for drives used in electrical vehicle (EV) & hybrid electrical vehicles", Int. Conf. Control Instrum. Commun. Comput. Technol. ICCICCT 2015, Dec 18-19, 2015, Kumaracoil, India, p. pp. 632-636, 2015, .
[http://dx.doi.org/10.1109/ICCICCT.2015.7475355]
[http://dx.doi.org/10.1109/ICCICCT.2015.7475355]
[24]
A. Morya, M. Moosavi, M.C. Gardner, and H.A. Toliyat, "Applications of Wide Bandgap (WBG) devices in AC electric drives: A technology status review", 2017 IEEE Int. Electr. Mach. Drives Conf. IEMDC, May 21-24, 2017, Miami, FL, USA, p. pp. 1-8, 2017, .
[25]
N. Tiwari, S. Yadav, and S.R. Arya, "Speed control of battery and super-capacitor powered EV/HEV using PID and fuzzy logic controller", Int. J. Innov. Comput. Appl., vol. 13, no. 2, pp. 97-114, 2022.
[http://dx.doi.org/10.1504/IJICA.2022.123225]
[http://dx.doi.org/10.1504/IJICA.2022.123225]
[26]
N. Tiwari, S. Yadav, and S.R. Arya, "Battery and super capacitor powered energy management scheme for EV/HEV using fuzzy logic controller and PID controller", Int. J. Power Electron, vol. 15, no. 3/4, pp. 309-333, 2022.
[http://dx.doi.org/10.1504/IJPELEC.2022.122411]
[http://dx.doi.org/10.1504/IJPELEC.2022.122411]
[27]
S. Kaul, N. Tiwari, S. Yadav, and A. Kumar, "Comparative analysis and controller design for BLDC motor using PID and adaptive PID controller", Recent Adv. Electr. Electron. Eng. Formerly Recent Patents Electr. Electron. Eng., vol. 14, no. 6, pp. 671-682, 2021.
[28]
L. Xu, Y. Liu, and X. Wen, "Comparison study of singly-fed electric machine with doubly-fed machine for EV/HEV applications", 2011 International Conference on Electrical Machines and Systems, Aug 20-23, 2011, Beijing, China, p. pp. 2-6, 2011, .
[http://dx.doi.org/10.1109/ICEMS.2011.6073508]
[http://dx.doi.org/10.1109/ICEMS.2011.6073508]
[29]
Y. Liu, and L. Xu, "The dual-current-loop controlled doubly fed induction motor for EV/HEV applications", IEEE Trans. Energ. Convers., vol. 28, no. 4, pp. 1045-1052, 2013.
[http://dx.doi.org/10.1109/TEC.2013.2279853]
[http://dx.doi.org/10.1109/TEC.2013.2279853]
[30]
Y.S. Lin, K.W. Hu, T.H. Yeh, and C.M. Liaw, "An electric vehicle IPMSM drive with interleaved front end DC/DC converter", IEEE Trans. Vehicular Technol., vol. 65, no. 6, pp. 4493-4504, 2016.
[http://dx.doi.org/10.1109/TVT.2015.2435040]
[http://dx.doi.org/10.1109/TVT.2015.2435040]
[31]
S. Sadeghi, J. Milimonfared, M. Mirsalim, and M. Jalalifar, "“Dynamic modeling and simulation of a switched reluctance motor in electric vehicles”, 2006 1st IEEE Conf", Ind. Electron. Appl, vol. 2, no. 2, 2006.
[32]
D. Cajander, and H. Le-Huy, "Design and optimization of a torque controller for a switched reluctance motor drive for electric vehicles by simulation", Math. Comput. Simul., vol. 71, no. 4-6, pp. 333-344, 2006.
[http://dx.doi.org/10.1016/j.matcom.2006.02.025]
[http://dx.doi.org/10.1016/j.matcom.2006.02.025]
[33]
K. Kiyota, and A. Chiba, "Design of switched reluctance motor competitive to 60-kW IPMSM in third-generation hybrid electric vehicle", IEEE Trans. Ind. Appl., vol. 48, no. 6, pp. 2303-2309, 2012.
[http://dx.doi.org/10.1109/TIA.2012.2227091]
[http://dx.doi.org/10.1109/TIA.2012.2227091]
[34]
C. Gan, J. Wu, Y. Hu, S. Yang, W. Cao, and J.M. Guerrero, "New integrated multilevel converter for switched reluctance motor drives in plug-in hybrid electric vehicles with flexible energy conversion", IEEE Trans. Power Electron., vol. 32, no. 5, pp. 3754-3766, 2017.
[http://dx.doi.org/10.1109/TPEL.2016.2583467]
[http://dx.doi.org/10.1109/TPEL.2016.2583467]
[35]
R. Cao, C. Mi, and M. Cheng, "Quantitative comparison of flux-switching permanent-magnet motors with interior permanent magnet motor for EV, HEV, and PHEV applications", IEEE Trans. Magn., vol. 48, no. 8, pp. 2374-2384, 2012.
[http://dx.doi.org/10.1109/TMAG.2012.2190614]
[http://dx.doi.org/10.1109/TMAG.2012.2190614]
[36]
W. Hua, and L. Zhou, "Investigation of a co-axial dual-mechanical ports flux-switching permanent magnet machine for hybrid electric vehicles", Energies, vol. 8, no. 12, pp. 14361-14379, 2015.
[http://dx.doi.org/10.3390/en81212434]
[http://dx.doi.org/10.3390/en81212434]
[37]
E. Bin Sulaiman, T. Kosaka, and N. Matsui, "Design study and experimental analysis of wound field flux switching motor for HEV applications", Proc. 2012 20th Int. Conf. Electr. Mach. ICEM, Sept 2-5, 2012, Marseille, France, p. pp. 1269-1275, .
[http://dx.doi.org/10.1109/ICElMach.2012.6350039]
[http://dx.doi.org/10.1109/ICElMach.2012.6350039]
[38]
E. Sulaiman, T. Kosaka, and N. Matsui, "High power density design of 6-slot-8-pole hybrid excitation flux switching machine for hybrid electric vehicles", IEEE Trans. Magn., vol. 47, no. 10, pp. 4453-4456, 2011.
[http://dx.doi.org/10.1109/TMAG.2011.2140315]
[http://dx.doi.org/10.1109/TMAG.2011.2140315]
Related Journals
Recent Patents on Engineering
Related Books
Voltammetry for Sensing Applications
