Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Research Article

A Parameter Optimization Simulation Method for Crank Torque of Double Horse Head Pumping Unit Dynamics Model with Cable

Author(s): Zou Longqing, Chen Guijuan, Zou Qian and Zhao Haiyang*

Volume 12, Issue 2, 2018

Page: [135 - 142] Pages: 8

DOI: 10.2174/1872212111666170817102254

Price: $65

Abstract

Background: Patents revealed that Double Horse Head (DHH) pumping unit is one of the improved models developed from the conventional units, and some unbalanced crank torque may cause high cycle alternating stress which can lead to cracking failure in some key components. This makes the research on simulation of crank torque in beam pumping units a more interesting topic in its maintenance operation.

Objective: This paper aims to improve the accuracy of crank torque simulation model for the DHH pumping unit by a parameter optimization method for cable joints.

Methods: By using a series of cylinders to model the steel cable, a pumping unit multibody dynamics model was constructed to simulate the crank torque. Then the stiffness and damping coefficient in bushing joint and contact force of cable were treated as the key factors, and a Genetic Algorithms based the method was proposed to optimize them for improving the simulation accuracy of the model.

Results: This method was applied to simulate the crank torque of a DHH pumping unit, and the experimental torque was also tested from real unit. Results show that the crank torque simulated from improved model is much closer to the experimental tested torque compared with the original model.

Conclusion: The parameter optimization method proposed in this paper greatly improved the accuracy of simulated crank torque in DHH pumping unit multibody dynamics model.

Keywords: Double horse head pumping unit, crank torque, genetic algorithms, stiffness and damping coefficient, bushing joint, contact force.

Graphical Abstract

[1]
L. Yijie, W. Tongjian, and W. Xin, "Simulation research on hydraulic hybrid assistant beam pumping unit", Proc. Inst. Mech. Eng., Part C J. Mech. Eng. Sci., vol. 230, pp. 1795-1804, 2016.
[2]
L. Hongqiang, L. Jun, H. Jiuqiang, and J. An, "An energy saving system for a beam pumping unit", Sensors , vol. 16, pp. 685-697, 2016.
[3]
R.G. Zheng, "“Current situation and development of energy-saving pumping unit”, J Appl", Energy Technol. , vol. 3, pp. 1-3, 2000.
[4]
D. Guo, Z.Z. Zhang, and X.M. Bai, "Comprehensive economic analysis of energy-saving pumping unit", J. Pet. Mach., vol. 35, pp. 60-63, 2007.
[5]
C. Larrainzar, I. Korin, and I.J. Perez, "Analysis of fatigue crack growth and estimation of residual life of the walking beam of an oilfield pumping unit", Eng. Fail. Anal., vol. 17, pp. 1038-1050, 2010.
[6]
D.P. Yang, X.S. Gao, and Y. Dai, "Dynamic simulation system of variable parameter flexible linkage mechanism of dual horse head pump unit", Chin. J. Mech. Eng., vol. 46, pp. 59-66, 2010.
[7]
H.L. Fu, L.Q. Zou, and Y. Wang, "Study on design and simulation analysis of the double horse-head pumping unit based on the compound balance structure", Proc. Inst. Mech. Eng.,Part C J. Mech. Eng. Sci., vol. 229, pp. 3034-3046, 2015.
[8]
L. Q. Zou, and and H. L. Fu, “A composite balanced DDH pumping unit”. CN Patent 202745830U, March 20, 2013.
[9]
O.L. Rowlan, J.N. Mccoy, and A.L. Podio, "Best method to balance torque loadings on a pumping unit gearbox", J. Can. Pet. Technol., vol. 44, pp. 27-32, 2005.
[10]
Y. Lu, and T. Leinonen, "Kinematic and dynamic simulation of a dual-beam pumping unit for increasing stroke and reducing force", Trans. ASME, vol. 126, pp. 320-325, 2004.
[11]
B.Y. Yu, Q.K. Feng, and Y.X. Yu, "Dynamic simulation and stress analysis for reciprocating compressor crankshaft", Proc. Inst. Mech. Eng.,Part C J. Mech. Eng. Sci., vol. 227, pp. 845-851, 2013.
[12]
I. Khemili, and L. Romdhane, "Dynamic analysis of a flexible slider-crank mechanism with clearance", Eur. J. Mech. A, Solids, vol. 27, pp. 882-898, 2008.
[13]
Z.X. Du, and M.D. Liu, "Study on modeling the cable system of bridge tower testing machine based on adams macro programs", Mach. Des. Res., vol. 29, pp. 140-143, 2013.
[14]
S.S. Zheng, L.Y. Zhang, G.W. Fu, and M.X. Li, "Modeling and simulation based on virtual prototype adams for wire rope", Mech. Eng. Autom., vol. 173, pp. 26-28, 2012.
[15]
P. Flores, and J. Ambrosio, "Revolute joints with clearance in multibody systems", Comput. Struc., vol. 82, pp. 1359-1369, 2004.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy