[1]
Kłos, M.; Milchert, E.; Malarczyk, K. Industrial uses of vegetable oils. Przem. Chem., 2016, 95, 1000-1006.
[2]
Hofland, A. Alkyd resins: From down and out to alive and kicking. Prog. Org. Coat., 2012, 73, 274-282.
[3]
Haseebuddin, S.; Parmar, R.; Waghoo, G.; Glosh, S.K. Study of hexafunctional polyols in high solids air-drying alkyd: Improved film performance. Prog. Org. Coat., 2009, 64, 446-453.
[4]
Alam, M.; Akram, D.; Sharmin, E.; Zafar, F.; Ahmad, S. Vegetable oil based eco-friendly coating materials: A review article. Arabian . J. Chem., 2014, 7, 469-479.
[5]
Muizebelt, W.J.; Hubert, J.C.; Nielen, M.W.F.; Klaasen, R.P.; Zabel, K.H. Crosslink mechanisms of high-solids alkyd resins in the presence of reactive diluents. Prog. Org. Coat., 2000, 40, 121-130.
[6]
Szlezyngier, W.; Brzozowski, Z. Plastics.Vol. 1:; Wydawnictwo Oświatowe Fosze: Rzeszów, Poland, 2012.
[7]
Akintayo, C.O.; Adebowale, K.O. Synthesis and characterization of acrylated Albizia benth medium oil alkyds. Prog. Org. Coat., 2004, 50, 207-212.
[8]
Dutta, N.; Karak, N.; Dolui, S.K. Alkyd-epoxy blends as multipurpose coatings. J. Appl. Polym. Sci., 2006, 100, 516-521.
[9]
Heiskanen, N.; Jamsa, S.; Paajanen, L.; Koskimies, S. Synthesis and performance of alkyd acrylic hybryd binders. Prog. Org. Coat., 2010, 67, 329-338.
[10]
Aigbodion, A.I.; Okiemen, F.E.; Iukhuoria, E.U.; Bakare, I.O.; Obazee, E.O. Rubber seed oil modified with maleic anhydride and fumaric acid and their alkyd resins as binders inwater-reducible coatings. J. Appl. Polym. Sci., 2003, 89, 3286-3259.
[11]
Saravari, O.; Phapant, P.; Pimpan, V. Synhesis of water-reducible acrylic-alkyd resins based on modified palm oil. J. Appl. Polym. Sci., 2005, 96, 1170-1175.
[12]
Althawale, V.D.; Nimbalkar, R.V. Emulsifyable air drying urethane. Prog. Org. Coat., 2010, 67, 66-71.
[13]
Dhoke, S.K.; Khanna, A.S.; Sinha, T.K.M. Effect of nano-ZnO particles on the corrosion behavior of alkyd based waterborne coatings. Prog. Org. Coat., 2009, 64, 371-382.
[14]
Dhoke, S.K.; Khanna, A.S. Effect of nano-ZnO addition on the silicone-modified alkyd-based waterborne coatings on its mechanical and heat-resistance properties. Prog. Org. Coat., 2009, 64, 39-46.
[15]
Dhoke, S.K.; Bhandari, R.; Khanna, A.S. Effect of nano-Fe2O3 particles on the corrosion behavior of alkyd based waterborne coatings. Corr. Sci., 2009, 51, 6-20.
[16]
Alam, J.; Riaz, U.; Ahmad, S. High performance corrosion resistant polyaniline/alkyd ecofriendly coatings. Curr. Appl. Phys., 2009, 9, 80-86.
[17]
Alam, J.; Riaz, U.; Ashraf, S.M.; Ahmad, S. Corrosion-protective performance of nano polyaniline/ferrite dispersed alkyd coatings. J. Coat. Technol. Res., 2008, 5(1), 123-128.
[18]
Sailer, R.A.; Wegner, J.R.; Hurtt, G.J.; Janson, J.E.; Soucek, M.D. Linseed and sunflower oil alkyd creamers. Prog. Org. Coat., 1998, 33, 117-125.
[19]
Saravari, O.; Praditvatanakit, S. Preparation and properties of urethane alkyd based on a castor oil/jatropha oil mixture. Prog. Org. Coat., 2013, 76, 698-704.
[20]
Pathan, S.; Ahmad, S. Synthesis, characterization and effect of s-triazine ring on physico-mechanical and electrochemical corrosion resistance performance of waterborne castor oil alkyd. J. Mater. Chem. A., 2013, 1, 14227-14238.
[21]
Pathan, S.; Ahmad, S. S-triazine ring modified waterborne alkyd: Synthesis, characterization, antibacterial and electrochemical corrosion studies. ACS Sustain. Chem., 2013, 1, 1246-1257.
[22]
Sałaciński, Ł.; Milchert, E. Epoxidized vegetable oils in the production of coatings. Przem. Chem., 2017, 96(5), 1000-1005.
[23]
Milchert, E.; Malarczyk, K.; Kłos, M. Technological aspects of chemoenzymatic epoxidation of fatty acids, fatty acid esters and vegetable oils: A review. Molecules, 2015, 20, 21481-21493.
[24]
Huang, K.; Zhang, P.; Zhang, J.; Li, S.; Li, M.; Xia, J.; Zhou, Y. Preparation of biobased epoxies using tung oil fatty acid-derived C21 diacid and C22 triacid and study of epoxy properties. Green Chem., 2013, 15, 1466-1472.
[25]
Narine, S.S.; Yue, J.; Kong, X. Production of polyols from canola oil and their chemical identyfication and physical properties. J. Amer. Oil Chem. Soc., 2007, 84, 173-179.
[26]
Desroches, M.; Escouvois, M.; Auvergne, R.; Caillol, S.; Boutevin, B. From vegetable oils to polyurethanes: Synthetic routes to polyols and main industrial products. Polym. Rev., 2012, 52(1), 38-79.
[27]
Meshram, P.D.; Puri, R.G.; Patil, A.L.; Gite, V.V. Synthesis and chacterization of modified cottonseed oil based polyesteramide for coating applications. Prog. Org. Coat., 2013, 76, 1144-1150.
[28]
Zafar, F.; Sharmin, E.; Ashraf, S.M.; Ahmad, S. Ambient cured polyesteramide-based anticorrosive coatings from linseed oil a sustainable resource. J. Appl. Polym. Sci., 2008, 97, 1818-1824.
42
1