Abstract
Background: In this study, a new model of linear induction motor, along with the impact of end-effect on motor performance, is proposed. Moreover, a new strategy of control approach based on the polynomial RST controller is suggested and investigated.
Objective: The proposed approach can provide a robust control strategy and overcome the limitations imposed by the proportional-integral (PI) regulator in the FOC technique. RST controller has a two-degree of freedom structure and consists of three polynomials, namely R, S and T, which are determined by the pole placement method and resolving of a Diophantine equation. Despite this, the implementation of this method is usually difficult and becomes more complicated with the complexity of the controlled plants.
Methods: This study proposes the genetic algorithm (GA) optimization strategy for tuning RST controller parameters (adjust the controller coefficients) in order to achieve an adequate response time by minimizing the different objective functions, such as steady-state error, settling time, and rise time.
Results: The accuracy and control performance of the proposed technique are checked and validated using Matlab /Simulink environment software tool. Simulation results reported that the proposed method (RST-GA) could provide robust solutions with perfect reference tracking and efficient disturbance rejection.
Conclusion: These significant results make the proposed approach a promising technique for the design of a high-performance controller, which is highly suitable for industrial and electrical applications.
[1]
A. Loukianov, R. Jorge, Y.A. Alanis, and J.J. Raygoza, Super-twisting sensorless control of linear induction motors. 9th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE) Sept 26-28, 2012,, Mexico City, Mexico, 2012, pp. 1-5.
[http://dx.doi.org/10.1109/ICEEE.2012.6421172]
[http://dx.doi.org/10.1109/ICEEE.2012.6421172]
[2]
G. Kang, and K. Nam, "Field-oriented control scheme for linear induction motor with the end effect", IEE Proc., Electr. Power Appl., vol. 152, no. 6, pp. 1565-1572, 2005.
[http://dx.doi.org/10.1049/ip-epa:20045185]
[http://dx.doi.org/10.1049/ip-epa:20045185]
[3]
F.J. Lin, and C.C. Lee, "Adaptive backstepping control for linear induction motor drive to track periodic references", IEE Proc., Electr. Power Appl., vol. 147, no. 6, pp. 449-458, 2000.
[http://dx.doi.org/10.1049/ip-epa:20000647]
[http://dx.doi.org/10.1049/ip-epa:20000647]
[4]
Faa-Jeng Lin, Rong-Jong Wai, Wen-Der Chou, and Shu-Peng Hsu, "Adaptive backstepping control using recurrent neural network for linear induction motor drive", IEEE Trans. Ind. Electron., vol. 49, no. 1, pp. 134-146, 2002.
[http://dx.doi.org/10.1109/41.982257]
[http://dx.doi.org/10.1109/41.982257]
[5]
J. Liu, F. Lin, Z. Yang, and T.Q. Zheng, Field oriented control of linear induction motor considering attraction force & end-effects. 2006 CES/IEEE 5th International Power Electronics and Motion
Control Conference, Aug 14-16, 2006, Shanghai, China, 2006.
[http://dx.doi.org/10.1109/IPEMC.2006.4777973]
[http://dx.doi.org/10.1109/IPEMC.2006.4777973]
[6]
L. Zhang, Z. Dong, L. Zhao, and S. Laghrouche, "Sliding mode observer for speed sensorless linear induction motor drives", IEEE Access, vol. 9, pp. 51202-51213, 2021.
[http://dx.doi.org/10.1109/ACCESS.2021.3067805]
[http://dx.doi.org/10.1109/ACCESS.2021.3067805]
[7]
O. Maktabdar, M. Shamsinezhad, and H. Eliasi, "Effect of reaction plate on performance of single-side linear induction motor in different speeds and frequencies with finite element method. ", 9th Symposium on Advances in Science & Technology, pp. 34-38, 2015.
[8]
H. Hamzehbahmani, "Modeling and simulating of single side short stator linear induction motor with the end effect", J. Electr. Eng., vol. 62, no. 5, pp. 302-308, 2011.
[http://dx.doi.org/10.2478/v10187-011-0048-5]
[http://dx.doi.org/10.2478/v10187-011-0048-5]
[9]
M. Pucci, "Direct field oriented control of linear induction motors", Electr. Power Syst. Res., vol. 89, pp. 11-22, 2012.
[http://dx.doi.org/10.1016/j.epsr.2012.01.012]
[http://dx.doi.org/10.1016/j.epsr.2012.01.012]
[10]
B. Markov, and D. Tsankova, "Mit rule based model reference adaptive control of linear induction motor", Annals of the Faculty of Engineering Hunedoara, vol. 12, no. 3, pp. 95-99, 2014.
[11]
F. Poitiers, T. Bouaouiche, and M. Machmoum, "Advanced control of a doubly-fed induction generator for wind energy conversion", Electr. Power Syst. Res., vol. 79, no. 7, pp. 1085-1096, 2009.
[http://dx.doi.org/10.1016/j.epsr.2009.01.007]
[http://dx.doi.org/10.1016/j.epsr.2009.01.007]
[12]
A. Jacknoon, M. Hassan, and S.E. Ferik, Design of RST controllers based on intelligent optimization algorithms. 2016 Conference of Basic Sciences and Engineering Studies (SGCAC) Feb 20-23, 2016, Khartoum, Sudan, 2016, pp. 177-182.
[http://dx.doi.org/10.1109/SGCAC.2016.7458025]
[http://dx.doi.org/10.1109/SGCAC.2016.7458025]
[13]
S. Bouallègue, R. Madiouni, and J. Haggège, "Particle swarm optimization-based approach for digital RST controller design", In: Systems, Automation and Control, 2016.
Available from: https://www.degruyter.com/ [http://dx.doi.org/10.1515/9783110448436-007]
Available from: https://www.degruyter.com/ [http://dx.doi.org/10.1515/9783110448436-007]
[14]
M.A. Sahib, and B.S. Ahmed, "A new multiobjective performance criterion used in PID tuning optimization algorithms", J. Adv. Res., vol. 7, no. 1, pp. 125-134, 2016.
[http://dx.doi.org/10.1016/j.jare.2015.03.004] [PMID: 26843978]
[http://dx.doi.org/10.1016/j.jare.2015.03.004] [PMID: 26843978]
[15]
S. Panda, B.K. Sahu, and P.K. Mohanty, "Design and performance analysis of PID controller for an automatic voltage regulator system using simplified particle swarm optimization", J. Franklin Inst., vol. 349, no. 8, pp. 2609-2625, 2012.
[http://dx.doi.org/10.1016/j.jfranklin.2012.06.008]
[http://dx.doi.org/10.1016/j.jfranklin.2012.06.008]
[16]
M.J. Neath, A.K. Swain, U.K. Madawala, and D.J. Thrimawithana, "An Optimal PID controller for a bidirectional inductive power transfer system using multiobjective genetic algorithm", IEEE Transactions on Power Electronics, vol. 29, no. 3, pp. 1523-1531, 2014.
[http://dx.doi.org/10.1109/TPEL.2013.2262953]
[http://dx.doi.org/10.1109/TPEL.2013.2262953]
[17]
M.A. Hannan, J.A. Ali, A. Mohamed, U.A.U. Amirulddin, N.M.L. Tan, and M.N. Uddin, "Quantum-behaved lightning search algorithm to improve indirect field-oriented Fuzzy-PI control for IM drive", IEEE Trans. Ind. Appl., vol. 54, no. 4, pp. 3793-3805, 2018.
[http://dx.doi.org/10.1109/TIA.2018.2821644]
[http://dx.doi.org/10.1109/TIA.2018.2821644]
[18]
A.W. Mohamed, H.Z. Sabry, and M. Khorshid, "An alternative differential evolution algorithm for global optimization", J. Adv. Res., vol. 3, no. 2, pp. 149-165, 2012.
[http://dx.doi.org/10.1016/j.jare.2011.06.004]
[http://dx.doi.org/10.1016/j.jare.2011.06.004]
[19]
Z.L. Gaing, "A particle swarm optimization approach for optimum design of PID controller in AVR system", IEEE Trans. Energ. Convers., vol. 19, no. 2, pp. 384-391, 2004.
[http://dx.doi.org/10.1109/TEC.2003.821821]
[http://dx.doi.org/10.1109/TEC.2003.821821]
[20]
D. Maddi, A. Sheta, D. Davineni, and H. Al-Hiary, Optimization of PID controller gain using evolutionary algorithm and swarm intelligence. 10th International Conference on Information and Communication Systems (ICICS) June 11-13, 2019, Irbid, Jordan, 2019, pp. 199-204.
[http://dx.doi.org/10.1109/IACS.2019.8809144]
[http://dx.doi.org/10.1109/IACS.2019.8809144]
[21]
S.A. Nasar, and I. Boldea,, Linear Motion Electromagnetic System., John Wiley & Sons Inc, 1995.
[22]
J. Faiz, and H. Jagari, "Accurate modeling of single-sided linear induction motor considers end effect and equivalent thickness", IEEE Trans. Magn., vol. 36, no. 5, pp. 3785-3790, 2000.
[http://dx.doi.org/10.1109/20.908365]
[http://dx.doi.org/10.1109/20.908365]
[23]
J.F. Gieras, G.E. Dawson, and A.R. Eastham, "A new longitudinal end effect factor for linear induction motors", IEEE Trans. Energ. Convers., vol. EC-2, no. 1, pp. 152-159, 1987.
[http://dx.doi.org/10.1109/TEC.1987.4765816]
[http://dx.doi.org/10.1109/TEC.1987.4765816]
[24]
S. Motlagh, and S.S. Fazel, Indirect vector control of linear induction motor considering end effect2012 3rd Power Electronics
and Drive Systems Technology (PEDSTC), Feb 15-16, 2012, Tehran,
Iran, 2012, pp. 193-198.
[http://dx.doi.org/10.1109/PEDSTC.2012.6183324]
[http://dx.doi.org/10.1109/PEDSTC.2012.6183324]
[25]
E.F. da Silva, E.B. dos Santos, P.C.M. Machado, and M.A.A. de Oliveira, "Dynamic model for linear induction motors", IEEE International Conference on Industrial Technology, vol. 1, pp. 478-482, 2003.
[http://dx.doi.org/10.1109/ICIT.2003.1290372 ]
[http://dx.doi.org/10.1109/ICIT.2003.1290372 ]
[26]
M. Cirrincione, A. Accetta, M. Pucci, and G. Vitale, "MRAS speed observer for high-performance linear induction motor drives based on linear neural networks", IEEE Trans. Power Electron., vol. 28, no. 1, pp. 123-134, 2013.
[http://dx.doi.org/10.1109/TPEL.2012.2200506]
[http://dx.doi.org/10.1109/TPEL.2012.2200506]
[27]
F. Alonge, M. Cirrincione, F. D’Ippolito, M. Pucci, and A. Sferlazza, "Active disturbance rejection control of linear induction motor", IEEE Trans. Ind. Appl., vol. 53, no. 5, pp. 4460-4471, 2017.
[http://dx.doi.org/10.1109/TIA.2017.2697845]
[http://dx.doi.org/10.1109/TIA.2017.2697845]
[28]
Z.A. Ali, D.B. Wang, R. Javed, and A. Akbar, "Modeling & controlling the dynamics of tri-rotor UAV using robust RST controller with MRAC adaptive algorithm", Int. J. Control. Autom. Syst., vol. 9, no. 3, pp. 61-76, 2016.
[http://dx.doi.org/10.14257/ijca.2016.9.3.07]
[http://dx.doi.org/10.14257/ijca.2016.9.3.07]
[29]
F. Hachicha, and L. Krichen, Performance analysis of a wind energy conversion system based on a doubly-fed induction generator. IEEE Transactions, 8th International Multi-Conference on
Systems, March 22-25, 2011, Sousse, Tunisia, 2011, pp. 978-984.
[http://dx.doi.org/10.1109/SSD.2011.5767481]
[http://dx.doi.org/10.1109/SSD.2011.5767481]
[30]
A. Gupta, R. Machavaram, T. Kshatriya, and S. Ranjan, Multi-Objective design optimization of a three phase squirrel cage induction motor for electric propulsion system using genetic algorithm. Proceedings of the IEEE First International Conference on Smart Technologies for Power, Energy and Control (STPEC) Sep 25-26, 2020, Nagpur, India, 2020, pp. 25-26.
[http://dx.doi.org/10.1109/STPEC49749.2020.9297776]
[http://dx.doi.org/10.1109/STPEC49749.2020.9297776]
[31]
M. Amanullah, M. Jain, P. Tiwari, S. Gupta, and G. Kumari, "Optimization of PID Parameter for Position Control of DC-Motor using Multi-Objective Genetic Algorithm", Int. J. Innov. Res. Electr. Instrum. Control Eng, vol. 2, no. 6, pp. 1644-1650, 2014.
[32]
A. Jayachitra, and R. Vinodha, "Genetic algorithm based PID controller tuning approach for continuous stirred tank reactor", Adv. Artif. Intell., vol. 2014, pp. 1-8, 2014.
[http://dx.doi.org/10.1155/2014/791230]
[http://dx.doi.org/10.1155/2014/791230]
Related Journals
Recent Patents on Engineering
Related Books
Voltammetry for Sensing Applications
