Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Mini-Review Article

A Review of Thermal Effect of Hydrostatic Bearing

Author(s): Xiaodong Yang, Jian Zhang, Hongbo Liu, Xianli Liu*, Feilin Liu and Wei Feng Liu

Volume 17, Issue 6, 2023

Published on: 20 October, 2022

Article ID: e051022209594 Pages: 12

DOI: 10.2174/1872212117666221005094400

Price: $65

Abstract

Background: With the continuous development of the modern machinery industry, the technical level of rotating machinery is increasing. As a key component of the bearing system and power transmission system in rotating machinery, the hydrostatic bearing has higher performance requirements in all aspects. When the system is working normally, due to the shearing effect of the lubricating oil driven by the spindle rotation, a large amount of heat will be generated. The system will generate thermal effects on the bearing through heat accumulation and heat conduction. The thermal effect will directly reduce the viscosity of the hydraulic oil, affecting the bearing capacity. Seriously, it will cause thermal deformation of the parts, which will affect the normal operation of the bearing, and even cause an accident.

Objective: Analysis and discussion on the thermal effect of hydrostatic bearing in recent years.

Methods: More than 70 recently published patents, as well as journal and conference papers on hydrostatic bearings, were reviewed. The results of temperature fields, pressure fields, deformation, lubrication, bearing capacity and friction were studied.

Results: This review summarizes the research results from three aspects: the influencing factor of temperature rise, the influence of temperature rise on bearing structure and performance, and the effective control of temperature rise.

Conclusion: The relevant research methods are analyzed. The problem of thermal effect of hydrostatic bearing is summarized and prospected, and the future development can be expected.

Keywords: Hydrostatic bearing, Thermal effect, Thermal deformation, Lubrication, Carrying capacity, Frictional characteristic.

Graphical Abstract

[1]
Y.Q. Zhang, R. Li, C.X. Dai, J.P. Shao, X.D. Yang, and G.T. Sun, "Research on hydrostatic supporting temperature-rise of heavy nc machine tool", Appl. Mech. Mater., vol. 274, pp. 132-135, 2013.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.274.132]
[2]
Y.Q. Zhang, R. Li, C.X. Dai, J.P. Shao, X.D. Yang, and G.T. Sun, "Temperature field of hydrostatic supporting disk in different viscosity and rotational speed", Appl. Mech. Mater., vol. 274, pp. 124-127, 2013.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.274.124]
[3]
Y.Q. Zhang, H.K. Cheng, L.L. Guo, L.G. Fan, X.B. Kong, and X.J. Wang, "Multi-pad hydrostatic bearing oil film temperature characteristics under different working mediums", In International Conference on Computer Science & Education (ICCSE), 23-25 August 2016, Nagoya, Japan, IEEE, 2016.
[4]
Y. Zhang, P. Kong, Y. Feng, and L. Guo, "Hot oil carrying characteristic about hydrostatic bearing oil film of heavy vertical lathe in high speed", Ind. Lubr. Tribol., vol. 71, no. 05, 2018.
[5]
M. Yu, X. Yu, X. Zheng, and H. Jiang, "Thermal-fluid-solid coupling deformation of hydrostatic thrust bearing friction pairs", Ind. Lubr. Tribol., vol. 71, no. 3, pp. 467-473, 2019.
[http://dx.doi.org/10.1108/ILT-07-2018-0262]
[6]
J.P. Shao, X.D. Yang, Y.F. Wang, X.Q. Xu, Y.Q. Zhang, X.D. Yu, and X.Z. Sun, "Research on temperature field distribution of heavy hydrostatic thrust bearing rotation-workbench at different rotating velocity", Adv. Mat. Res., vol. 239-242, pp. 2703-2706, 2011.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.239-242.2703]
[7]
X.D. Yu, L. Tan, H.H. Li, Z.Q. Wang, Q.H. Zhou, X.L. Meng, and C.Q. Yang, "Influence of rotational speed on oil film temperature of multi-sector recess hydrostatic thrust bearing", Chin. J. Mech. Eng., vol. 34, no. 05, pp. 371-378, 2013.
[8]
X.D. Yu, X.L. Meng, B. Wu, C.L. Gao, Z.X. Qiu, Y.Q. Zhang, and Z.M. Shi, "Research on temperature field of hydrostatic thrust bearing with annular cavity multi-pad", Appl. Mech. Mater., vol. 121, pp. 3477-3481, 2012.
[9]
X.D. Yu, X. Fu, X.L. Meng, D. Liu, Y.Q. Zhang, and W.S. Wang, "Experimental and numerical study on the temperature performance of high-speed circular hydrostatic thrust bearing", J. Comput. Theor. Nanosci., vol. 12, no. 8, pp. 1540-1545, 2015.
[http://dx.doi.org/10.1166/jctn.2015.3925]
[10]
X.D. Yu, Q.H. Zhou, Z.Q. Wang, D. Lu, X. Fu, L. Tan, and H.H. Li, "Temperature field and velocity characteristics of high speed heavy duty hydrostatic thrust bearing", J. Harbin Univ. Sci. Technol., vol. 19, no. 01, pp. 1-4, 2014.
[11]
X. Li, T. Cheng, M. Li, M. Li, R. Wu, and Y. Wan, "Theoretical research on sector oil-pads’ mechanical property in hydrostatic thrust bearing based on constant flow", Ind. Lubr. Tribol., vol. 69, no. 4, pp. 491-506, 2017.
[http://dx.doi.org/10.1108/ILT-03-2016-0060]
[12]
S.G. Wang, X.F. Du, D.S. Li, and Q.M. Hu, "Characteristic study on temperature field of hydrostatic bearing of hydroforming machine", Adv. Mat. Res., vol. 605, pp. 630-635, 2013.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.605-607.630]
[13]
M.Y. Li, J.M. Chen, and Q. Hu, "Thermal performance analysis of tapered hydrostatic bearing based on coupled heat transfer", Mech. Res. Appl., vol. 27, no. 3, pp. 36-38, 2014.
[14]
M.Y. Li, J.M. Chen, and Q. Hu, "Coupling thermal analysis and experimental study of tapered hydrostatic bearing", Lubr. Seal., vol. 39, no. 11, pp. 103-106, 2014.
[15]
M.Y. Li, J.M. Chen, and Q. Hu, "Analysis of temperature rise characteristics of tapered hydrostatic bearing", Mach. Des. Manufact., vol. 4, pp. 137-139, 2014.
[16]
S.T. Liu, J.F. Shen, and J. Wang, "Temperature characteristic analysis of hydrostatic ball bearing based on fluent", Agri. Equip. Vehicle Eng., vol. 58, no. 4, pp. 104-107, 2020.
[17]
Y.Q. Zhang, Z.Q. Zhang, Y.N. Feng, P.R. Kong, J.C. Sun, and X.B. Kong, "Film lubrication characteristics of double rectangular cavity hydrostatic plain bearing at high speed", Tribol. J., vol. 38, no. 5, pp. 609-618, 2018.
[18]
Y.Q. Zhang, Y.N. Feng, S.Q. Ni, and Y. Luo, "Temperature rise characteristics of incline hydrostatic bearing affected by hot oil carrying", J. Huazhong Univ. Sci. Technol., vol. 48, no. 07, pp. 122-127, 2020.
[19]
W. Chen, Y. Sun, Y. Liang, Q. Bai, P. Zhang, and H. Liu, "Hydrostatic spindle dynamic design system and its verification", Proc. Inst. Mech. Eng., B J. Eng. Manuf., vol. 228, no. 1, pp. 149-155, 2014.
[http://dx.doi.org/10.1177/0954405413497006]
[20]
W.B. Rowe, "Conical hydrostatic journal bearings for high speeds", Proc. Inst. Mech. Eng. J. Eng. Tribol., vol. 235, no. 4, pp. 808-819, 2021.
[http://dx.doi.org/10.1177/1350650120929251]
[21]
J.Q. Liu, "Study on temperature rise and convective heat transfer characteristics of Locomotive axle box bearing", Railway Locomot. Bull. Train, vol. 9, pp. 12-16, 2021.
[22]
Y.H. Li, X.L. Meng, X.D. Yu, B. Wu, C.L. Gao, Z.X. Qiu, and Z.M. Shi, "Simulation on temperature field of gap oil film in constant flow hydrostatic center frame", Appl. Mech. Mater., vol. 121, pp. 4706-4710, 2012.
[23]
J. Hu, and C. Liu, "Effect of working parameters on performance characteristics of hydrostatic turntable by using FSI-thermal model", J. Cent. South Univ., vol. 25, no. 11, pp. 2589-2600, 2018.
[http://dx.doi.org/10.1007/s11771-018-3938-x]
[24]
C.S. Guo, and Y. Cui, "Multi-physical field coupled thermal analysis of hydrostatic bearing in precision grinding machine", Modular Machine Tools Autom. Process. Technol., vol. 5, pp. 17-21, 2016.
[25]
C.Y. Chen, J.S. Li, Y.J. Yu, and Y.J. Xue, "Study on temperature rise characteristics of High Speed Angular contact ball Bearing in oil-gas lubrication", Machinery Des. Manuf., vol. 9, p. 7, 2021.
[26]
J. Shao, C. Dai, Y. Zhang, X. Yu, X. Xu, and Y. Wang, "The effect of oil cavity depth on temperature field in heavy hydrostatic thrust bearing", J. Hydrodynam., vol. 23, no. 5, pp. 676-680, 2011.
[http://dx.doi.org/10.1016/S1001-6058(10)60164-3]
[27]
J.P. Shao, Y.Q. Zhang, X.D. Yu, B. Qin, and Z.W. Wang, "Numerical Simulation and Analysis of temperature field in fan-shaped and circular cavities of heavy Hydrostatic Bearing", Hydrody. Res. Progress Series A, vol. 24, no. 1, pp. 119-124, 2009.
[28]
X. Xu, J. Shao, Y. Wang, C. Dai, X. Yang, Y. Zhang, and B. Wu, "Research on influence of return oil groove width on temperature field of hydrostatic thrust bearing with multiple oil pads", Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology, vol. 2, pp. 940-943, 2011.
[http://dx.doi.org/10.1109/EMEIT.2011.6023249]
[29]
C.Y. Zhang, Q.Y. Jin, and Z.M. Liu, "Comparison of bearing capacity of different shape oil cavities in hydrostatic support system", Proceedings of the 16th Annual Conference of Dynamic Society, Beijing, pp. 66-67, 2010.
[30]
S.C. Sharma, S.C. Jain, and D.K. Bharuka, "Influence of recess shape on the performance of a capillary compensated circular thrust pad hydrostatic bearing", Tribol. Int., vol. 35, no. 6, pp. 347-356, 2002.
[http://dx.doi.org/10.1016/S0301-679X(02)00013-0]
[31]
X.D. Yu, X.L. Meng, B. Wu, J.P. Shao, Y.Q. Zhang, and Z.M. Shi, "Simulation research on temperature field of circular cavity hydrostatic thrust bearing", Key Eng. Mater., vol. 419, pp. 141-144, 2010.
[32]
L. Peng, and T. Ma, "Analysis of oil chamber structure characteristics of hydrostatic and hydrostatic bearing", Horizon Sci. Technol., vol. 17, pp. 47-48, 2013.
[33]
Y.P. Guo, Y.Q. Zhang, L.Y. Deng, and H.X. Zhang, "Comparative analysis of oil film temperature rise characteristics of hydrostatic bearing with different cavity shapes", J. Harbin Univ. Sci. Technol., vol. 23, no. 04, pp. 55-58, 2018.
[34]
H.B. Zhou, A.Q. Pan, X.J. Hu, and R.J. Guo, "Static performance analysis of oil film flow field of liquid radial hydrostatic bearing based on fluent", Coal Mine Machinery, vol. 37, no. 1, pp. 101-104, 2016.
[35]
S.A. Guo, Z.Q. Hou, W.L. Xiong, and H.B. Lin, "Research on bearing characteristics of deep and shallow cavity hydrostatic bearing based on CFD", Manufact. Technol. Machine Tools, vol. 9, pp. 57-62, 2012.
[36]
S.K. Yadav, and S.C. Sharma, "Performance of hydrostatic textured thrust bearing with supply holes operating with non-newtonian lubricant", Tribol. Trans., vol. 59, no. 3, pp. 408-420, 2016.
[http://dx.doi.org/10.1080/10402004.2015.1083065]
[37]
D.D. Sun, Lubrication performance optimization of double rectangular cavity hydrostatic bearing, M.S. thesis, Harbin University of Science and Technology, Harbin, ON, China, 2012.
[38]
S.J. Wei, S. Yang, W.W. Hu, J.L. Wang, Q. Jia, and Z. Liu, "Simulation and experimental study of the performance of dynamic and hydrostatic bearing on the spindle of the machine tool", Machine Tools Hydr., vol. 50, no. 10, p. 5, 2022.
[39]
Y.M. Xia, G.Q. Zhang, S.B. Luo, and J.M. Zhang, "Distribution of temperature field of static bearing of aspheric ultra-precision machine tool", Optical Precision Eng., vol. 20, no. 8, pp. 1759-1764, 2012.
[40]
Y.Q. Zhang, X.Q. Xu, X.D. Yang, H.M. Li, H. Jiang, X.Y. Yu, and Z.M. Shi, "Analysis on influence of oil film thickness on temperature field of heavy hydrostatic bearing in variable viscosity condition", Adv. Mat. Res., vol. 239-242, pp. 1418-1421, 2011.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.239-242.1418]
[41]
Y.Q. Zhang, J.C. Sun, P.R. Kong, X.B. Kong, and X.D. Yu, "Research on the oil film temperature field of hydrostatic bearing with variable viscosity dynamic simulation and experiment", Proc. Inst. Mech. Eng., Part J. Eng. Tribol., vol. 233, no. 11, pp. 1763-1772, 2019.
[http://dx.doi.org/10.1177/1350650119846002]
[42]
H.H. Feng, C.D. Xu, and J. Wan, "Mathematical model and analysis of the water-lubricated hydrostatic journal bearing considering the translational and tilting motions", Math. Probl. Eng., vol. 2014, pp. 1-15, 2014.
[http://dx.doi.org/10.1155/2014/353769]
[43]
H.H. Feng, C.D. Xu, and F.F. Wang, "Combined influence of Misalignment and orifice diameter on the static performances of hydrostatic, water-lubricated journal bearing", Appl. Mech. Mater., vol. 607, pp. 608-611, 2014.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.607.608]
[44]
J.F. Zhou, Analysis of oil film temperature field of hydrostatic bearing under flow gas coupling state, M.S. thesis, Henan University of Science and Technology, Luoyang, ON, China, 2012.
[45]
L. Lu, H. Su, Y. Liang, and Z. Qiang, "Research on static stiffness of hydrostatic bearing using fluid-solid coupling analysis", Procedia Eng., vol. 29, pp. 1304-1308, 2012.
[http://dx.doi.org/10.1016/j.proeng.2012.01.131]
[46]
D.M. Yu, C.P. Shang, D. Wang, and Z.H. Gao, "Bearing loads study for high-speed motorized spindle", Key Eng. Mater., vol. 480-481, pp. 1511-1515, 2011.
[http://dx.doi.org/10.4028/www.scientific.net/KEM.480-481.1511]
[47]
S. Kishor, "Numerical Modeling and Simulation of Viscous Shear in Hydrostatic Bearing", ASME 2016 Power Conference collocated with the ASME 2016 10th International Conference on Energy Sustainability and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology, 2016.
[http://dx.doi.org/10.1115/POWER2016-59410]
[48]
H.C. Garg, V. Kumar, and H.B. Sharda, "Performance of slot-entry hybrid journal bearings considering combined influences of thermal effects and non-Newtonian behavior of lubricant", Tribol. Int., vol. 43, no. 8, pp. 1518-1531, 2010.
[http://dx.doi.org/10.1016/j.triboint.2010.02.013]
[49]
Z. Liu, Y. Wang, Y. Zhao, L. Cai, and Q. Cheng, "Effects of thermal and hydrodynamic characteristics of heavy-duty rotary table on the hydrostatic circular pads", J. Vibroeng., vol. 18, no. 7, pp. 4193-4206, 2016.
[http://dx.doi.org/10.21595/jve.2016.17079]
[50]
T. Nagaraju, S.C. Sharma, and S.C. Jain, "Influence of surface roughness on non-Newtonian thermohydrostatic performance of a hole-entry hybrid journal bearing", J. Tribol., vol. 129, no. 3, pp. 595-602, 2007.
[http://dx.doi.org/10.1115/1.2736451]
[51]
X.L. Zhu, "Study on temperature rise of lubricating oil in hydrostatic bearing of ball mill", J. Shanghai Univ. Eng. Sci., vol. 29, no. 03, p. 4, 2015.
[52]
X.L. Zhang, W. Feng, Z. Chen, and R. Li, "Spindle vibration test and the influence of temperature rise on spindle vibration", Mech. Eng., vol. 2, pp. 8-9, 2014.
[53]
C.M. Zhao, P. Ma, C.L. Gong, and X. Niu, "Research on dynamic and static characteristics of high precision hydrostatic radial bearing based on ANSYS-FLUENT", Machine Tools Hydraulics, vol. 42, no. 17, pp. 147-152, 2014.
[54]
S.Q. Hao, X.Y. Zhang, S.H. Wu, and Z.Y. Cao, "Numerical simulation and analysis of oil film temperature field of hydrostatic bearing in ball mill", J. Univ. Sci. Technol. Liaon., vol. 35, no. 02, p. 4, 2012.
[55]
C. Wang, "Analysis temperature field of hydrostatic bearing based on ANSYS", Mech. Manag. Develop., vol. 23, no. 05, pp. 101-104, 2008.
[56]
J. Shao, X. Yang, Y. Wang, X. Xu, Y. Zhang, and X. Yu, "Research on thermal deformation field of heavy hydrostatic thrust bearing rotation-workbench at different auxiliary-hole position", Proceedings of 2011 International Conference on Electronic & Mechanical Engineering and Information Technology, vol. 2, pp. 912-915, 2011.
[http://dx.doi.org/10.1109/EMEIT.2011.6023242]
[57]
J. Shao, X. Yang, L. Zhou, H. Li, Y. Zhang, and H. Jiang, "Numerical simulation of integrated deformation of heavy hydrostatic thrust bearing and experimental research", IEEE Comput. Society., vol. 2, pp. 45-48, 2009.
[http://dx.doi.org/10.1109/IHMSC.2009.137]
[58]
X. Yu, F. Wang, D. Zhou, D. Huang, S. Zhan, M. Yu, J. Jiao, and J. Wang, "Deformation characteristics of adaptive hydrostatic thrust bearing under extreme working conditions", J. Braz. Soc. Mech. Sci. Eng., vol. 42, no. 9, p. 489, 2020.
[http://dx.doi.org/10.1007/s40430-020-02571-4]
[59]
X.D. Yang, J.P. Shao, X.Q. Xu, Y.F. Wang, C. Yin, and H. Jiang, "Research on velocity influence on thermal deformation field of heavy hydrostatic thrust bearing", Adv. Mat. Res., vol. 129-131, pp. 968-972, 2010.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.129-131.968]
[60]
D.L. Zou, P. Li, Y. Huang, and C. Ma, "Influence of temperature rise on oil pressure of hydrostatic bearing", Mech. Eng., vol. 2, pp. 32-33, 1996.
[61]
M.Y. Li, "Study on thermal performance of tapered hydrostatic bearing", M.S. thesis, China Academy of Engineering Physics, China, 2014.
[62]
H. Su, L. Lu, Y. Liang, Q. Zhang, and Y. Sun, "Thermal analysis of the hydrostatic spindle system by the finite volume element method", Int. J. Adv. Manuf. Technol., vol. 71, no. 9-12, pp. 1949-1959, 2014.
[http://dx.doi.org/10.1007/s00170-014-5627-8]
[63]
C. Zhang, Effect of Bushing-spindle deformation on oil film Clearance of hydrostatic bearing, M.S. thesis, Chongqing University, Chongqing, ON, China, 2016.
[64]
X. Yu, G. Wu, W. Zhou, H. Bi, Y. Wang, W. Gao, J. Wang, J. Jiao, and H. Jiang, "Inclination angle effect of tribological performance for hydrostatic bearing having tilting oil pad under variable viscosity conditions", J. Braz. Soc. Mech. Sci. Eng., vol. 43, no. 4, p. 231, 2021.
[http://dx.doi.org/10.1007/s40430-021-02946-1]
[65]
W. Dong, B. Li, W. Guo, and Q. Zhou, "Prediction of different design conditions on comprehensive performance of hydrostatic slide and experimental verification", Int. J. Adv. Manuf. Technol., vol. 107, no. 1-2, pp. 535-547, 2020.
[http://dx.doi.org/10.1007/s00170-020-05036-z]
[66]
J.P. Shao, Y.Q. Zhang, and X.D. Yang, "Temperature field simulation of heavy hydrostatic bearing based on fluent", 5th China-Japan Conference On Mechatronics, 2008, pp. 16-20.
[67]
Y.Q. Zhang, W.W. Li, L.G. Fan, R. Li, and J.P. Shao, "Simulation and experimental analysis of influence of inlet flow on heavy hydrostatic bearing temperature field", Asian J. Chem., vol. 26, no. 17, pp. 5478-5482, 2014.
[http://dx.doi.org/10.14233/ajchem.2014.18138]
[68]
Z.Q. Wang, Study on performance of High Speed hydrostatic mixed Lubrication thrust bearing, M.S. thesis, Harbin University of Science and Technology, Harbin, ON, China, 2015.
[69]
J.F. Xiao, "Numerical simulation of flow characteristics of a new multi-ring oil chamber", Proceedings of the 23rd Annual conference of Beijing Force Society, pp. 69-70, 2017.
[70]
X.W. Lin, Design and temperature field research of trapezoidal hydrostatic bearing based on fluent, M.S. thesis, Lanzhou University of Technology, Lanzhou, ON, China, 2018.
[71]
Y.S. Zhang, X.W. Lin, C.C. Fan, G.Y. Su, and Y.X. Lu, "Research on structure optimization and temperature characteristics of hydrostatic bearing based on FLUENT", Hydraulics Pneumatics and Seals., vol. 39, no. 01, p. 4, 2019.
[72]
X. Li, W. Li, X. Chen, M. Li, H. Chen, and X. Yue, "Design and performance analysis on heat pipe hydrostatic thrust bearings based on rectangular oil pad", Ind. Lubr. Tribol., vol. 70, no. 7, pp. 1251-1257, 2018.
[http://dx.doi.org/10.1108/ILT-10-2017-0303]
[73]
X.Q. Xu, J.P. Shao, X.D. Yang, Y.Q. Zhang, X.D. Yu, and B.W. Gao, "Simulation on multi-oil-cavity and multi-oil-pad hydrostatic bearing", Appl. Mech. Mater., vol. 274, pp. 274-277, 2013.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.274.274]
[74]
Y. Huang, H. Gao, C.Q. Zhang, Y.F. Liu, and X.B. Li, "Cooling structure optimization simulation based on hydrostatic bearing deformation caused by temperature rise", Hot Working Process., vol. 47, no. 16, p. 5, 2018.
[75]
W. Feng, and X.L. Zhang, "Experimental research on temperature rise of machine tool spindle and control measures", Equipment Manufacturing Technology, vol. 11, p. 2, 2013.
[76]
S. Yan, B. Lin, W. Hu, and X. Zhang, "Water-lubricated ceramic hydrostatic bearing for high speed machine tool spindle unit", Proceedings of Asia International Conference on Tribology 2018, pp. 277-278, 2018.
[77]
I.S. Durazo-Cardenas, J. Corbett, and D.J. Stephenson, "The performance of a porous ceramic hydrostatic journal bearing", Proc. Inst. Mech. Eng. J. Eng. Tribol., vol. 224, no. 1, pp. 81-89, 2010.
[http://dx.doi.org/10.1243/13506501JET570]
[78]
D. Lu, K. Liu, W. Zhao, and B. Lu, "Thermal characteristics of water-lubricated ceramic hydrostatic hydrodynamic hybrid bearing", Tribol. Lett., vol. 63, no. 2, p. 23, 2016.
[http://dx.doi.org/10.1007/s11249-016-0711-x]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy