Login Register Cart 0
Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Adaptive LuGre Friction Compensation for Servo System Based on Backstepping Control and Feedforward Control

Author(s): Qixin Zhu*, Jiaqi Wang and Yonghong Zhu

Volume 15, Issue 8, 2022

Published on: 23 September, 2022

Page: [653 - 663] Pages: 11

DOI: 10.2174/2352096515666220422103218

Price: $65

Abstract

Aims: The study aims to improve the position control accuracy of a class of permanent magnet synchronous motors under friction.

Background: Permanent magnet synchronous motor and servo system are important parts of modern industry, in which the friction effect is a typical nonlinear factor. To overcome the nonlinear friction effect, it is necessary to design a compound feedforward algorithm to improve the motion control accuracy.

Objective: The objective of the study is to design a compound adaptive friction feedforward controller to overcome the nonlinear friction effect in the servo system while ensuring tracking accuracy.

Methods: A compound algorithm combining velocity-acceleration double feedforward and adaptive friction feedforward is proposed to ensure the control accuracy, and then the backstepping control is used to ensure strict convergence. Finally, the friction parameter observer is used to estimate the parameters, and the performance of the control system is simulated in the Simulink module.

Results: Compared to Pure Friction Feedforward Compensation (PFFC) and Adaptive Friction Compensation (AFC), Adaptive Backstepping Feedforward Friction Compensation (ABFFC) has a faster convergence speed, higher steady-state accuracy, and less friction nonlinear effect.

Conclusion: The servo system with adaptive backstepping and feedforward friction compensation improves the accuracy and convergence of control performance. Moreover, the adaptive permanent magnet synchronous motor control system can effectively overcome the nonlinear friction effect.

Keywords: Feedforward control, LuGre friction compensation, backstepping control, adaptive friction model, observer, non-linear.

« Previous Next »
Graphical Abstract

[1]
S. Schroeders, C.C. Maier, and W. Ebner, "Two-degree-of-freedom MIMO control for hydraulic servo-systems with switching properties", Control Eng. Pract., vol. 95, pp. 1-11, 2019.
[2]
D. Lin, and Y. Wu, "Tracing and implementation of IMM kalman filtering feed-forward compensation technology based on neural net-work", Optik, vol. 202-163574, pp. 1-8, 2019.
[3]
A.H. Sharghi, R.K. Mohammadi, and M. Farrokh, "Feed-forward controlling of servo-hydraulic actuators utilizing a least-squares support-vector machine", Progress in Artificial Intelligence, vol. 9, no. 1, pp. 1-21, 2020.
[4]
W. Lu, K. Ji, H. Dong, J. Zhang, Q. Wang, and L. Guo, "Double position servo synchronous drive system based on cross-coupling inte-grated feedforward control for broacher", Chin. J. Mech. Eng., vol. 30, no. 002, pp. 272-285, 2017.
[http://dx.doi.org/10.1007/s10033-017-0077-5]
[5]
H. Jin, and X. Zhao, "Extended kalman filter-based disturbance feed-forward compensation considering varying mass in high-speed per-manent magnet linear synchronous motor", Electr. Eng., vol. 101, no. 2, pp. 537-544, 2019.
[http://dx.doi.org/10.1007/s00202-019-00802-z]
[6]
P. Benes, M. Valasek, Z. Sika, J. Zavřel, and J. Pelikán, "SHAVO Control: the combination of the adjusted command shaping and feedback control for vibration suppression", Acta Mech., vol. 230, no. 5, pp. 1891-1905, 2019.
[http://dx.doi.org/10.1007/s00707-019-2363-z]
[7]
Z. Dai, L. Zhang, S.Y. Bolandi, and M. Habibi, "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., vol. 263, no. 113599, pp. 1-23, 2021.
[http://dx.doi.org/10.1016/j.compstruct.2021.113599]
[8]
M.S.H. Al-Furjan, E. Samimi-Sohrforozani, and M. Habibi, "Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory", Compos. Struct., vol. 257, no. 113152, pp. 1-12, 2020.
[9]
L. Zhang, Z. Chen, M. Habibi, A. Ghabussi, and R. Alyousef, "Low-velocity impact, resonance and frequency responses of fg-gplrc visco-elastic doubly curved panel", Compos. Struct., vol. 269, no. 114000, pp. 1-15, 2021.
[http://dx.doi.org/10.1016/j.compstruct.2021.114000]
[10]
A. Ghabussi, M. Habibi, and O. Noormohammadiarani, "Frequency characteristics of a viscoelastic graphene nanoplatelet–reinforced composite circular microplate", J. Vib. Control, vol. 107754632092393, pp. 1-18, 2020.
[11]
M. Safarpour, A. Ghabussi, and F. Ebrahimi, "Frequency characteristics of FG-GPLRC viscoelastic thick annular plate with the aid of GDQM – sciencedirect", Thin-walled Struct., vol. 150, no. 106683, pp. 1-14, 2020.
[12]
A. Shariati, D.W. Jung, H. Mohammad-Sedighi, K.K. Żur, M. Habibi, and M. Safa, "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry (Basel), vol. 12, no. 586, pp. 1-23, 2020.
[http://dx.doi.org/10.3390/sym12040586]
[13]
A. Shokrgozar, A. Ghabussi, and F. Ebrahimi, "Viscoelastic dynamics and static responses of a graphene nanoplatelets-reinforced compo-site cylindrical micro-shell", Mech. Based Des. Struct. Mach., vol. 2020, no. 2, pp. 1-29, 2020.
[14]
M.S.H. Al-Furjan, R. Dehini, and M. Khorami, "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., vol. 255, no. 112990, pp. 1-13, 2020.
[15]
X. Huang, Y. Zhu, P. Vafaei, Z. Moradi, and M. Davoudi, "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., no. February, pp. 1-13, 2021.
[http://dx.doi.org/10.1007/s00366-021-01320-y]
[16]
H. Moayedi, M. Habibi, H. Safarpour, M. Safarpour, and L.K. Foong, "Buckling and frequency responses of a graphen nanoplatelet rein-forced composite microdisk", Int. J. Appl. Mech., vol. 11, no. 10, pp. 1-32, 2019.
[http://dx.doi.org/10.1142/S1758825119501023]
[17]
Z. Moradi, M. Davoudi, F. Ebrahimi, and A.F. Ehyaei, "Intelligent wave dispersion control of an inhomogeneous micro-shell using a pro-portional-derivative smart controller", Waves Random Complex Media, vol. 2021, no. 11, pp. 1-24, 2021.
[http://dx.doi.org/10.1080/17455030.2021.1926572]
[18]
S. Chen, and Z. Zhang, "Modification of friction for straightforward implementation of friction law", Multibody Syst. Dyn., vol. 48, no. 2, pp. 239-257, 2019.
[http://dx.doi.org/10.1007/s11044-019-09694-0]
[19]
A. Nasr, C. Mard, and R. Nasri, "A study of friction vibration absorber: Impact of friction modeling on the efficacy of the absorber and friction coefficient optimization", Mech. Ind., vol. 19, no. 6, pp. 1-11, 2018.
[http://dx.doi.org/10.1051/meca/2018039]
[20]
T. Piatkowski, and M. Wolski, "Model of positioning objects by the system of oblique friction force fields on horizontal and vertically offset planes", Mechanism and Machine Theory: Dynamics of Machine Systems Gears and Power Trandmissions Robots and Manipulator Systems Computer-Aided Design Methods, vol. 156, pp. 1-24, 2020.
[21]
Q. Zhang, Q. Wang, and N. Cui, "Identification and control of the motor-drive servo turntable with the switched friction model", IET Electr. Power Appl., vol. 14, no. 5, pp. 843-849, 2020.
[http://dx.doi.org/10.1049/iet-epa.2019.0568]
[22]
L. Wang, Y. Chang, and H. Zhu, "Internal model control and experimental study of ankle rehabilitation robot", Robotica, vol. 38, no. 5, pp. 940-956, 2019.
[23]
C. Tang, H. Sun, and Y. Dai, "Friction model identification based on robust estimation of the linear motor", Open Autom. Control Syst. J., vol. 6, no. 1, pp. 283-287, 2014.
[http://dx.doi.org/10.2174/1874444301406010283]
[24]
C.M. Gehb, S. Atamturktur, R. Platz, and T. Melz, "Bayesian inference based parameter calibration of the lugre-friction model", Exp. Tech., vol. 44, no. 3, pp. 369-382, 2019.
[http://dx.doi.org/10.1007/s40799-019-00355-7]
[25]
S. Zuo, D. Zhou, and K. Hu, "Nonlinear modeling and verification of an electromagnetic actuator with consideration of friction", Proc. Inst. Mech. Eng., D J. Automob. Eng., vol. 234, no. 6, pp. 1759-1769, 2019.
[http://dx.doi.org/10.1177/0954407019882142]
[26]
J. Zhao, F. Zhang, and P. Liu, "Friction identification and compensation based on the lugre model", Mechatronics, vol. 10, pp. 13-17, 2016.
[27]
D. Liu, H. Bai, and W. Li, "Analysis and simulation for self-adaptive control method based on lugre friction model", Jisuan Jishu Yu Zidonghua, vol. 43, no. 3, pp. 16-20, 2015. [in Chinese]
[28]
C. Luo, J. Yao, and J. Gu, "Extended-state-observer-based output feedback adaptive control of hydraulic system with continuous friction compensation", J. Franklin Inst., vol. 356, no. 15, pp. 8414-8437, 2019.
[http://dx.doi.org/10.1016/j.jfranklin.2019.08.015]
[29]
J. Hu, Y. Wang, L. Liu, and Z. Xie, "High-accuracy robust adaptive motion control of a torque-controlled motor servo system with friction compensation based on neural network", Proc. Inst. Mech. Eng., C J. Mech. Eng. Sci., vol. 233, no. 7, pp. 2318-2328, 2018.
[http://dx.doi.org/10.1177/0954406218783017]
[30]
F. Yue, X. Li, C. Chen, and W. Tan, "Adaptive integral backstepping sliding mode control for opto-electronic tracking system based on modified lugre friction model", Int. J. Syst. Sci., vol. 48, no. 13/16, pp. 3374-3381, 2017.
[http://dx.doi.org/10.1080/00207721.2017.1387315]
[31]
F. Yue, and X. Li, "Robust adaptive integral backstepping control for opto-electronic tracking system based on modified LuGre friction model", ISA Trans., vol. 80, pp. 312-321, 2018.
[http://dx.doi.org/10.1016/j.isatra.2018.07.016] [PMID: 30078517]
[32]
C. Wang, and H. Zhao, Backstepping adaptive fuzzy control of servo system with lugre frictionMATEC Web of Conferences, vol. 104. 2017, pp. 1-9.
[33]
J. Wang, N. Liu, and J. Chen, "Adaptive control of servo system based on lugre model", International Conference on Mechatronics and Electrical Systems. 2018pp. 30-34 Wuhan, China
[34]
F. Du, X. Feng, and H. Li, "Modeling analysis and compensation study for the friction of a new high precision micro feed servo system", Journal of the Balkan Tribological Association, vol. 22, no. 4 Pt.1, pp. 3888-3905, 2016.
[35]
W. Liu, F. Ren, Y. Sun, and S. Jiang, "Contour error pre-compensation for three-axis machine tools by using cross-coupled dynamic fric-tion control", Int. J. Adv. Manuf. Technol., vol. 98, no. 1/4, pp. 551-563, 2018.
[http://dx.doi.org/10.1007/s00170-018-2189-1]
[36]
J.X. Xue, Q.Y. Guo, and F.S. Zhang, "Design of fuzzy PID control system based on feedforward compensation of the LuGre friction model", Modern Manufacturing Engineering, vol. 1, pp. 136-142, 2020. (in Chinese)

Rights & Permissions Print Cite
Article Metrics
1
© 2024 Bentham Science Publishers | Privacy Policy