Login Register Cart 0
Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Review Article

Recent Patents on Tension Control Device of Wire Electrode in WEDM

Author(s): Baocheng Xie *, Xiaowei Ni, Jingang Jiang *, Yuan Zhang, Ye Dai and Shengle Ren

Volume 12, Issue 3, 2019

Page: [188 - 200] Pages: 13

DOI: 10.2174/2212797612666190723101916

Price: $65

Abstract

Background: WEDM (Wire Electrical Discharge Machining) is widely used to machine difficult-to-machine materials, such as high-strength and high-brittle materials. The research on tension control device of the wire electrode is mainly to improve the machining precision and surface quality of WEDM.

Objective: To meet the growing demand for processing of difficult-to-machine materials, such as highstrength and high-brittle materials, the machining precision and surface quality of WEDM are improved continuously.

Methods: This paper reviews various representative patents related to the tension control device of wire electrode in WEDM.

Results: Through retracing the characteristics of different types of the tension control device of wire electrode in WEDM, the main problems existing in the current development are concluded and analyzed. The development trend of patents on the tension control device of wire electrode in WEDM is discussed.

Conclusion: The optimization and development of the tension control device of wire electrode in WEDM are beneficial to improve the machining precision and surface quality of WEDM. More related patents on the tension control device of wire electrode in WEDM will be invented.

Keywords: Difficult-to-machine materials, machining precision, surface quality, tension control device, wire electrical discharge machining, wire electrode.

« Previous Next »
[1]
Gauri SK, Chakraborty S. A study on the performance of some multi-response optimization methods for WEDM processes. Int J Adv Manuf Technol 2010; 49(1-4): 155-66.
[http://dx.doi.org/10.1007/s00170-009-2391-2]
[2]
Lee WM, Liao YS. Adaptive control of the WEDM process using a self-tuning fuzzy logic algorithm with grey prediction. Int J Adv Manuf Technol 2007; 34(5-6): 527-37.
[http://dx.doi.org/10.1007/s00170-006-0623-2]
[3]
Mukherjee R, Chakraborty S, Samanta S. Selection of wire electrical discharge machining process parameters using non-traditional optimization algorithms. Appl Soft Comput 2012; 12(8): 2506-16.
[http://dx.doi.org/10.1016/j.asoc.2012.03.053]
[4]
Zhou M, Jing HY, Wang ZD. Electric spark deep hole machining of high melting point difficult-to-machine materials. Aeronaut Manuf Technol 2018; 61(9): 16-22.
[5]
Tai GH, Lin F, Ye HC, Hou YJ, Chen XM, Han X, et al. Models and structural optimization methods for machining deformation of aeronautical structural parts based on residual stress release. Eng Mech 2018; 35(9): 224-32.
[6]
Yuan FG. Contents and trends of special processing methods. Mech Elect Eng Technol 2011; 7: 142-3.
[7]
Zhao JS, Wang WF, Lu YM, Fan YT, Liu DM. Research on precision EDM technology for closed integral components of difficult machining materials. Aeronaut Manuf Technol 2017; 522(3): 22-7.
[8]
Hanzel O, Singh MA, Marla D, Sedlak R, Sajgalik P. Wire electrical discharge machinable SiC with GNPs and GO as the electrically conducting filler. J Eur Ceram Soc 2019; 39(8): 2626-33.
[http://dx.doi.org/10.1016/j.jeurceramsoc.2019.03.012]
[9]
Deng C, Liu ZD, Zhang M, Ji YC, Pan HW. Minimizing drum-shaped inprecision in high-speed wire electrical discharge machining after multiple cuts. Int J Adv Manuf Technol 2019; 102(1-4): 241-51.
[http://dx.doi.org/10.1007/s00170-018-3068-5]
[10]
Wu XY, Li SJ, Zhao W, Tang L, Li ZP. Experiment investigation of using wire electrochemical machining in deionized water to reduce the wire electrical discharge machining surface roughness. Int J Adv Manuf Technol 2019; 102(1-4): 343-53.
[http://dx.doi.org/10.1007/s00170-018-3196-y]
[11]
Lu C, Zhen JR. Three-dimensional vibration analysis of continuous pulse discharge electrode wire by wire cutting. Mech Des Manuf 2015; 5: 130-3.
[12]
Huang RN, Shi L, Lou YJ. Effect of ultrasonic modulated pulse discharge on the efficiency and quality of WEDM. Electric Mach Mold 2015; 1: 15-7.
[13]
Shang TY, Zhang Z, Chen Z, Ming WY. Analysis of electromagnetic force on electrode wire in WEDM. Mech Des Manuf 2014; 11: 112-4.
[14]
Chen CX. Research on corner cutting strategy of WEDM MS Dissertation, Shanghai Jiaotong University, Shanghai, China, February 2011.
[15]
Lu C, Shen TL, Chen Z, Ming WY. Modeling of spatial temperature distribution of electrode wire in WEDM. Mech Des Manuf 2015; 4: 120-2.
[16]
Zhang ZY. Research on constant tension control of electrode wire in reciprocating WEDM machine tool MS Dissertation, Harbin Institute of Technology, Harbin, China, July 2014.
[17]
Lu C, Shi W. Research on constant tension control system of wire electrode for reciprocating wire-cutting. Mach Tool Hydraul Pressure 2015; 43(23): 50-3.
[18]
Meng XQ, Li HT. Improvement and improvement of surface quality in slow-walking wire EDM. Mold Manuf 2018; 1: 63-6.
[19]
Rao PM, Li HZ. The form and development trend of constant tension mechanism of reciprocating wire EDM machine tool. Electric Mach Mold 2017; 3: 68-70.
[20]
Pi ZM, Gong ZL. Study on the influence of transverse vibration of electrode wire on the gap of WEDM. Mach Sci Technol 2013; 32(9): 1389-93.
[21]
Jia X. Research on microcomputer control system for constant tension of WEDM electrode wire. Equip Manuf Tech 2009; 2: 11-2.
[22]
Qi WC, Gao JQ, Guo LH, Huang Y. Discussion on development strategy of wire-moving system of reciprocating WEDM machine tool. Manuf Technol Mach Tools 2014; 7: 51-4.
[23]
Jiang YC, Ren FJ. Constant tension control system of electrode wire based on multi-axis motion controller. China Mech Eng 2008; 19(16): 1920-4.
[24]
Sun YJ. Constant speed and constant tension control of electrode wire in the low-speed WEDM machine tool MS Dissertation, Harbin Institute of Technology, Harbin, China, July 2007.
[25]
Okada A, Uno Y, Nakazawa M, Yamauchi T. Evaluations of spark distribution and wire vibration in wire EDM by high-speed observation. CIRP Ann 2010; 59(1): 231-4.
[http://dx.doi.org/10.1016/j.cirp.2010.03.073]
[26]
Wang Y, Chen X, Wang Z, Li H, Liu H. Fabrication of the micro-rotating structure by micro reciprocated wire-EDM. J Micromech Microeng 2016; 26(11)115014
[http://dx.doi.org/10.1088/0960-1317/26/11/115014]
[27]
Li L, Zhidong L, Xiefeng L, Mingming L. Non-even wire tension in high-speed wire electrical discharge machining. Int J Adv Manuf Technol 2015; 78(1-4): 503-10.
[http://dx.doi.org/10.1007/s00170-014-6661-2]
[28]
Shi W, Zhidong L, Mingbong Q, Zongjun T. Wire tension in high-speed wire electrical discharge machining. Int J Adv Manuf Technol 2016; 82(1-4): 379-89.
[http://dx.doi.org/10.1007/s00170-015-7352-3]
[29]
Shi W, Liu Z, Qiu M, Tian Z, Yan H. Simulation and experimental study of wire tension in high-speed wire electrical discharge machining. J Mater Process Technol 2016; 229: 722-8.
[http://dx.doi.org/10.1016/j.jmatprotec.2015.11.001]
[30]
Garg RK, Singh KK, Sachdeva A, Sharma VS, Ojha K, Singh S. Review of research work in sinking EDM and WEDM on metal matrix composite materials. Int J Adv Manuf Technol 2010; 50(5-8): 611-24.
[http://dx.doi.org/10.1007/s00170-010-2534-5]
[31]
Lin ZH. Trouble maintenance of high-frequency power supply for CNC WEDM machine tool. Metal Process 2012; 11: 94-6.
[32]
Mandal A, Dixit AR. State of art in wire electrical discharge machining process and performance. Int J Mach Machinabil Mater 2014; 16(1): 1-21.
[http://dx.doi.org/10.1504/IJMMM.2014.063918]
[33]
Habib S, Okada A. Experimental investigation on wire vibration during fine wire electrical discharge machining process. Int J Adv Manuf Technol 2016; 84(9-12): 2265-76.
[http://dx.doi.org/10.1007/s00170-015-7818-3]
[34]
Shi WT, Liu ZD, Qiu MB, Tian ZJ. Wire tension in high-speed wire electrical discharge machining. Int J Adv Manuf Technol 2016; 82(1-4): 379-89.
[http://dx.doi.org/10.1007/s00170-015-7352-3]
[35]
Liu ZD. Development trend of high-speed WEDM technology. Aviati Manuf Technol 2014; 463(19): 40-5.
[36]
Liu ZD, Wang ZX. WEDM technology for high-speed wire traveling based on interpole flow model analysis. J Shanghai Jiaotong Univ 2011; 45(1): 61-5.
[37]
Zhou GY. Analysis of workpiece surface quality in high-speed WEDM. J Elect Eng 2006; 8: 40-2.
[38]
Zhang WM. Development and application of high precision six-axis NC slow-walking wire cutting machine with automatic threading device. World Manuf Technol Equip Market 2016; 5: 42-7.
[39]
Liu ZD. The development trend of WEDM technology with high speed reciprocating wire traveling Seminar on WEDM technology, Jiangsu Province, China, October 2014.
[40]
Shi WT. Study on cause of tension change and uniform control of wire electrode in high-speed reciprocating wire EDM MS Dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing, China, March 2016.
[41]
Zhou GL, Zhang D. Effect of electrode wire on surface roughness in high-speed WEDM. Manuf Automat 2009; 31(10): 39-41.
[42]
Wang YQ. EDM wire cutting machine tool electrode wire tension adjustment mechanism. CN102328138 (2012)
[43]
Zhang QK. A constant tension periodic regulating mechanism of electrode wire for WEDM. CN102357691 (2014)
[44]
Wang ZY. A new wire tension adjusting device of the WEDM machine tool. CN207787892 (2018)
[45]
Xu H, Yang J, Hu Q, Zhao K, Li ZJ. A constant tension device for EDM machine tool. N206316496 (2017)
[46]
Su YJ, Huang Q. A constant tension automatic adjusting device of wire electrode of WEDM machine tool. CN205702752 (2016)
[47]
Huang RN, Lou YJ, Fang XL. The constant tension wirefeeding control device and its control method for micro-WEDM. CN103302370 (2015)
[48]
Liu ZD, Qiu MB, Shi WT, Tian ZJ, Shen LD. The tension balance control method of high-speed reciprocating wire EDM forward and backward wire traveling. CN104607740 (2017)
[49]
Zhang XD. A wire-feeding mechanism for wire tension control of WEDM. CN104607740 (2017)
[50]
Zhang XD. The constant tension automatic feeding mechanism of the reciprocating WEDM machine tool. CN203751469 (2014)
[51]
Li KJ. A control method of wire electrode for the reciprocating WEDM machine. CN105345182 (2017)
[52]
Li KJ. The automatic tension control device of wire electrode of the WEDM machine. CN203649589 (2014)
[53]
Zhang YJ, Li YF, Wang KJ, Li YD, Chen HH. A tensioning device of wire electrode of the synchronous WEDM machine tool. CN109465509 (2019)
[54]
Wang T, Wu JR, Wu LB. A tension adjustable wire guide mechanism for the WEDM machine. CN207547801 (2018)
[55]
Li CZ. The tension control device of WEDM. CN204295083 (2015)
[56]
Yamazaki S, Matsui T. Wire EDM. JP5220179 (2013)
[57]
Yousan H. Wire-cut electric discharge machining apparatus. JP5414660 (2014)
[58]
Wang T, Lu X, Zhao S, Gao JP. A regular tightening device for electrode wire of high speed wire-driven WEDM machine tool. CN205702753 (2016)
[59]
Luan YY, Han L, Yu LL. The automatic tightening frame of a fast-moving WEDM machine. CN208195862 (2018)
[60]
Li HZ. An accurate closed-loop wire-feeding mechanism for wire tension control of WEDM machine CN204075432 2015.
[61]
Wang YW, Li F, Guo JD, Zhang BH, Jin QF. The automatic tightening device installed on the WEDM machine tool. CN208787698 (2019)
[62]
Wang T, Wu Y, Ge J, Lu X, Tang Q. An automatic tightening device of wire electrode of the WEDM machine tool. CN205309486 (2016)
[63]
Li QD. An improved tension adjusting mechanism of the WEDM machine. CN104722865 (2015)
[64]
Jia S, Wang LF. Zhu, Gang, X. A variable force tensioning device for WEDM. CN204673104 (2015).
[65]
Xu QP, Ye J, Zhu WG. Liu, B., Zhao, D.R. The microelectrode wire guide for unidirectional WEDM machine. CN205852013 (2017).
[66]
Qiu MB, Liu ZD, Kong LL, Zou Y. A two-stage tension control device for WEDM. CN109128409 (2019).
[67]
Wang T, Wu LB, Ma YH. A flexible adjustable automatic tightening device of wire electrode of the WEDM machine. CN107876915 (2018).
[68]
Qiu MB, Wang WS. Zhang, M. Zou, Y., Zhou, Y.Y. A kind of motor spring wire feeder of wire EDM. CN109365934 (2019).
[69]
Wang Y, Liu XL. The automatic tightening device of wire electrode of the WEDM machine. CN204934791 (2016).
[70]
Yamada L. Wire electrical discharge machining apparatus. JP5088975 (2012).
[71]
Yuki K, Hiroyuki A, Yoshinori M. Wire-cut electric discharge machine having wire tension control function. US7800010 (2010).
[72]
Masuda M, Kawahara A, Nakashima Y. A wire electric discharge machine with tension monitoring function. EP3037202 (2016)
[73]
Yamada K, Kougo MH, Yanagisawa TH. Wire electrical discharge machining device. WO2012053568 (2012).
[74]
Yuki K, Yushi T, Yoshiaki T. Wire electrode supply device of wire-cut electric discharge machine. US20070228016 (2007).
[75]
Giorgio B, Peter W. Method and apparatus for tensioning a wire electrode in a spark-erosion machine. US6541728 (2003)
[76]
Aso T, Kajitori T, Hirai T. Wire tension control device. EP0445296 (1989).
[77]
Hada K, Minamitsuru-Gun Y. Wire electric discharge machine having function to correct detected value of tensile force. EP3064302 (2016).

Rights & Permissions Print Cite
Article Metrics
17
1
© 2024 Bentham Science Publishers | Privacy Policy