Login Register Cart 0
Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
General Research Article

A Novel Tension Control System of Square Lithium Battery Laminated Machine

Author(s): Wen-Hua Ding, Xiao-Peng Xie, PAN-Feng Zhang* and Lei Han

Volume 13, Issue 1, 2020

Page: [69 - 79] Pages: 11

DOI: 10.2174/2352096512666190411112015

Price: $65

Abstract

Background: To the problem that the traditional square laminated machine with passive unwinding control strategy makes the tape speed periodical changing in reciprocating motion and not achieve a good tension control, a novel unwinding system and control algorithm are presented to improve the efficiency and quality of such equipment.

Methods: Compared with the traditional passive unwinding control system, the novel tension control system adds an active compliance mechanism. After obtaining the motion relationship between the compliance device and the laminated motion platform through building the complex system mathematical model, the laminated machine tension control is equivalent to a spatial trajectory tracking control, and multi-axis synchronous coordinated control algorithm is used to control their relative motions, and a cross-coupling control in multi-axis coordinated motion is presented to decrease the synchronous error of the two linear servo motors, which are the compliance device driving motor and the laminated motion platform driving one. Without tension sensor, however, good tension control is obtained only by position tracking control.

Results: Based on the proposed approaches and novel unwinding mechanism, the tension control was examined on an experimental square lithium battery laminated machine and results of the experiments performed with the experimental setup demonstrated the effectiveness of the proposed approach.

Conclusion: Without a tension sensor, good tension control is obtained only by position tracking control in the novel unwinding system, and the production quality and efficiency of the lithium battery laminated machine are improved.

Keywords: Square lithium-ion battery, laminated machine, continuous unwinding, tension control, cross-coupling synchronous control, constant linear velocity.

« Previous Next »
Graphical Abstract

[1]
J.J. Chen, "Lithium-ion power battery critical process equipment in China", Publ. Commun. Sci. Technol., vol. 13, pp. 114-115, 2012.
[2]
S.S. Reddy, "Emergency reserve activation considering demand-side resources and battery storage in a hybrid power system", Electr. Eng., vol. 100, pp. 1-11, 2017.
[3]
S. Surender, "Optimal power flow with renewable energy resources including storage", Electr. Eng., vol. 99, pp. 685-695, 2017.
[4]
S.S. Reddy, "Optimal scheduling of thermal-wind-solar power system with storage", Renew. Energy, vol. 101, pp. 1357-1368, 2017.
[5]
S. Narasimha, and S.R. Salkuti, "Design and implementation of smart uninterruptable power supply using battery storage and photovoltaic arrays", Inter. J. Eng. Technol., vol. 7, pp. 960-965, 2018.
[6]
S.R. Salkuti, and C-M. Jung, "Comparative analysis of storage techniques for a grid with renewable energy sources", Inter. J. Eng. Technol., vol. 7, pp. 970-976, 2018.
[7]
J.K. Chen, Z. Yin, Y. Xiong, and J. Quan, "A hybrid control method of tension and position for a discontinuous web transport system In:", International Conference on Information & Automation Zhuhai, Macau, China 2009, pp. 265 - 270.
[8]
J.S. Lu, H.R. Chen, M.Y. Cheng, K.H. Su, L.W. Cheng, and M.C. Tsai, "Tension control improvement in automatic stator in-slot winding machines using iterative learning control , In", International Conference on Information Science Sapporo, Japan, Vol. 3, pp. 1643-1647, 2014.
[9]
Z. Muhammad, P. Ganeshthangaraj, Y.J. Yang, and C.K. Hyun, "Web tension regulation of multispan roll-to-roll system using integrated active dancer and load cells for printed electronics applications", Chin. J. Mech. Eng., vol. 27, pp. 229-239, 2014.
[10]
P.R. Pagilla, N.B. Siraskar, and R.V. Dwivedula, "Decentralized control of web processing lines", IEEE Trans. Contr. Syst. Technol., vol. 15, pp. 106-117, 2006.
[11]
M.A. Valenzuela, J.M. Bentley, and R.D. Lorenz, "Sensorless tension control in paper machines", IEEE Trans. Ind. Appl., vol. 39, pp. 294-304, 2003.
[12]
S.Q. Peng, Y.X. Dai, and H.X. Xu, "The parallel difference coupling synchronization control of automatic winding of LED multi-wire saw", Inf. Control, vol. 41, pp. 559-563, 2012.
[13]
Q. Wang, H. Liu, and D. Chen, "Design of tension control system for dyeing and printing machine based on gravity sensor", China Textile Leader, Vol. 9, pp. 84-86, 2012..
[14]
C. Lee, H. Kang, and K. Shin, "Advanced taper tension method for the performance improvement of a roll-to-roll printing production line with a winding process", Int. J. Mech. Sci., vol. 59, pp. 61-72, 2012.
[15]
Z. Chen, Y. Zheng, M. Zhou, S.H. Wong, L. Chen, and Z. Deng, "Model-based feedforward register control of roll-to-roll web printing systems", Control Eng. Pract., vol. 51, pp. 58-68, 2016.
[16]
Y.B. Zhang, Y.X. Dai, J.L. Yuan, and W.L. Xiong, "Design and implement of wire tension control system for multi-wire saw", J. Mechan. Eng., vol. 45, pp. 295-300, 2009.
[17]
F.L. Luo, "Multiple-page-mapping backpropagation neural network for constant tension control", IEE Proc., Electr. Power Appl., vol. 145, pp. 239-245, 1998.
[18]
M.D. Baumgart, and L.Y. Pao, "Robust control of nonlinear tape transport systems with and without tension sensors", J. Dyn. Syst. Meas. Control, vol. 129, pp. 41-55, 2007.
[19]
L.R. You, and X.C. Yang, "Tension control system based on lithium battery winding machine", Cont. Eng. China, vol. 18, pp. 890-892, 2011.
[20]
J.K. Chen, Z.P. Yin, and Y.L. Xiong, "A tension control method for discontinuous winding processes by using PMAC", J. Huazhong Univers. Sci. Technol.. (Natural Science Edition), Vol. 7, pp. 1-4, 2010.
[21]
N. Nevaranta, M. Niemela, O. Pyrhonen, J. Pyrhonen, and T. Lindh, "Indirect tension control method for an intermittent web transport system In:", 15th International Power Electronics and Motion Control Conference (EPE/PEMC) Novi Sad, Serbia, 2013, pp. DS2a-2.
[22]
C-C. Cheng, and C-Y. Chen, "A PID approach to suppressing stick-slip in the positioning of transmission mechanisms", Control Eng. Pract., vol. 6, pp. 471-479, 1998.
[23]
L. Han, H. Hu, W.H. Ding, and J.Y. Li, "Tension control methodology of active continuous discharge and intermittent reciprocating work based on master-slave synchronous motion", Inter. Conf. Civil, Architecture Environm. Eng. pp. 808-813, 2017.
[24]
M-Y. Cheng, and C-C. Lee, "Motion controller design for contour-following tasks based on real-time contour error estimation", IEEE Trans. Ind. Electron.. vol. 54, pp. 1686-1695, 20074
[25]
K-H. Su, and M-Y. Cheng, "Contouring accuracy improvement using cross-coupled control and position error compensator", Int. J. Mach. Tools Manuf., vol. 48, pp. 1444-1453, 2008.

Rights & Permissions Print Cite
Article Metrics
9
© 2024 Bentham Science Publishers | Privacy Policy