Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Research Article

LINC Method for MMIC Power Amplifier Linearization

Author(s): Said Elkhaldi*, Naima Amar Touhami, Mohamed Aghoutane and Taj-Eddin Elhamadi

Volume 12, Issue 5, 2019

Page: [402 - 407] Pages: 6

DOI: 10.2174/2352096511666180611101146

Price: $65

Abstract

Background: This article proposes the design and implementation of a MMIC (monolithic microwave integrated circuits) Power amplifier using the ED02AH process.

Methods: The MMIC ED02AH technology have been developed specifically for microwave applications up to millimeter waves, and for high-speed digital circuits. The use of a single branch of a power amplifier can produce high distortion. In the present paper, the Linear amplification with nonlinear components (LINC) method is introduced and applied as a solution to linearize the power amplifier, it can simultaneously provide high efficiency and high linearity. To validate the proposed approach, the design and characterization of a 5.25 GHz LINC Power Amplifier on MMIC technology is presented.

Results: Good results have been achieved, and an improvement of about 37.50 dBc and 59 dBc respectively is obtained for the Δlower C/I and Δupper C/I at 5.25 GHz.

Conclusion: As a result of this method, we can reduce the Carrier Power to Third-Order Intermodulation Distortion Power Ratio. Excellent linearization is obtained almost 37.6 dBc for Δlower C/I and 58.8 dBc for Δupper C/I.

Keywords: Power amplifier, MMIC circuit, LINC method, Intermodulation Products (IP3), carrier to intermodulation distortion power ratio (C/I), ED02AH process.

Graphical Abstract

[1]
N. Khalid, T. Abbas, and M.B. Ihsan, "Power amplifier design using GaN HEMT in class-AB mode for LTE communication band In:", International Wireless Communications and Mobile Computing Conference (IWCMC). Dubrovnik, Croatia, pp. 685- 689, 2015.
[2]
C. Poole, and I. Darwazeh, Microwave active circuit analysis and design., Academic Press, 2016.
[3]
ED02AH Design Manual, OMMIC, 2008.
[4]
R. Garg, I. Bahl, and M. Bozzi, "Microstrip lines and slotlines third edition", Microwave & RF.; Artech House, 2013.
[5]
S. Voinigescu, "High-frequency integrated circuits, high-frequency integrated circuits", Cambridge University Press, 2013.
[6]
M.K. Kazimierczuk, “RF power amplifiers Second Edition; John Wiley & Sons, 2015.
[7]
S.A. Maas, "Nonlinear microwave and RF circuits", Artech House, 2003.
[8]
I. Bahl, "Fundamentals of RF and microwave transistor amplifiers", John Wiley & Sons, 2009.
[9]
P. Colantonio, F. Giannini, and E. Limiti, "High efficiency RF and microwave solid state power amplifiers", John Wiley & Sons; 2009.
[10]
S.C. Cripps, "RF power amplifiers for wireless communications", Second Edition; Artech House, 2006.
[11]
A. Birafane, M. El-Asmar, A.B. Kouki, M. Helaoui, and F.M. Ghannouchi, "Analyzing LINC systems", IEEE Microw. Mag., vol. 11, no. 5, pp. 59-71, 2010.
[12]
D. Cox, "Linear amplification with nonlinear components", IEEE Trans. Commun., vol. 22, no. 12, pp. 1942-1945, 1974.
[13]
H. Chireix, "High power outphasing modulation", Proceed. IRE, vol. 23, pp. 1370-1392, 1935.
[14]
W. Hamdane, A. Birafane, A.B. Kouki, and F. Gagnon, "In:", Signal Processing and Communications: An adaptive MILC amplification system for adaptive MQAM transmitters, Proceedings of the IEEE Int. Conf. Signal Processing and Communications. Dubai, UAE, 2007, pp. 780-783.
[15]
C. Baylis, M. Moldovan, L. Wang, and J. Martin, "LINC power amplifiers for reducing out-of-band spectral re-growth: A comparative study In:", IEEE 11th Annual Wireless and Microwave Technology Conference (WAMICON),. Melbourne, FL, USA, pp. 1-4, 2010.
[16]
J.W. Rogers, and C. Plett, "Radio frequency integrated circuit design", Artech House, 2010.
[17]
X.A. Nghiem, and R. Negra, "Design of concurrent multiband doherty power amplifiers for wireless applications", IEEE Trans. Microw. Theory Tech., vol. 61, no. 12, pp. 4559-4568, 2013.
[18]
W. Chen, S.A. Bassam, X. Li, Y. Liu, K. Rawat, and M. Helaoui, "Design and linearization of concurrent dual-band Doherty power amplifier with frequency dependent power ranges", IEEE Trans. Microw. Theory Tech., vol. 59, no. 10, pp. 2537-2546, 2011.
[19]
S. Hamedi-Hagh, and C.A. Salama, "Wideband CMOS integrated RF combiner for LINC transmitters In:", Proceedings of the Radio Frequency Integrated Circuits Symposium, IEEE. Philadelphia, PA, USA, 2003, pp. 555-558.
[20]
K. Finnerty, J. Dooley, R. Wesson, M.P. van der Heijden, M. Acar, and R. Farrell, "Behavioral modeling of out phasing amplification systems", IEEE Trans. Microw. Theory Tech., vol. 64, no. 12, pp. 4165-4173, 2016.
[21]
K. Rawat, B. Gowrish, G. Ajmera, R. Kalyan, A. Basu, S. Koul, and F.M. Ghannouchi, "Design strategy for tri-band Doherty power amplifier, In:", Proceedings of the 15th Wireless and Microwave Technology Conference, WAMICON IEEE. Tampa, FL, USA, 2014, pp. 1-3.
[22]
Z. Zhu, and X. Huang, "An iterative calibration technique for LINC transmitter", In: IEEE 56th International Midwest Symposium on Circuits and Systems (MWSCAS),. Columbus, OH, USA, 2013, pp. 384-387.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy