Abstract
In this paper, a facile method to fabricate two-dimensional (2D) Sn nanoparticles is demonstrated. Sn nanoparticles are deposited on porous anodic alumina membrane (PAA) by using thermal vapor deposition (TVD) technique. A set of PAA membranes fabricated under the same conditions was coated with Sn for different periods of time. SEM images showed the formation of hexagonal nanoarrays of Sn around each nanopore following a selective agglomeration growth mechanism on the active dots of the PAA surface. As the deposition time increased from 1 to 3 min, the agglomerated particles height increased from 20 to 75 nm. Moreover, Sn was thermally deposited for 2 min onto PAA substrates of different pore diameters. As the pore diameter increases, the formed Sn particles diameter decreases and their density distribution around each pore is improved, which may be attributed to the dimensions of the active area of the PAA surface. According to reflection spectra, it was found that the oscillation strength of the samples increased as the deposition time increased to 2 min. For the time greater than 2 min, the oscillation strength decreased due to the scattering of light, particularly in the short wavelength region, that caused by the increase of sample roughness.
Keywords: Growth mechanism, nanoparticles, porous anodic alumina membrane, reflection spectra, thermal evaporation technique.
Graphical Abstract
Related Books
The Art of Nanomaterials
Advanced Materials and Nano Systems: Theory and Experiment - Part 2
Advanced Materials and Nano Systems: Theory and Experiment (Part-1)
Artificial Intelligence for Smart Cities and Villages: Advanced Technologies, Development, and Challenges
SILVER NANOPARTICLES: Synthesis, Functionalization and Applications
13