Abstract
Background: The production of thin film TiO2 nanostructured systems for electrocatalytic, photocatalytic, and photoelectrocatalytic applications has been an essential topic in recent years. Due to the light-sensitive effect of TiO2, it can be produced by various methods and used as a photoelectrode to remove dye. Using magnetron sputtering, Ti thin films can be deposited on different substrates and converted into transparent TiO2 structures by electrochemical anodization.
Methods: In this study, the thin Ti film was produced using a magnetic spraying technique on the FTO substrate, and then an anodic TiO2 structure was obtained by the anodization technique. TiO2 films produced by the anodizing technique were used as a photoelectrode for the degradation of MB. The reactor contained 400 mL of 20 mg/L MB solution at 20 °C. The produced photoelectrode was characterized by the SEM/EDS, FTIR, XRD, and UV-Vis Spectrophotometer analyses.
Results: The EDS analysis confirmed the presence of titanium and oxygen in the FTO/ Anodized TiO2 photoelectrode. The XRD results showed that all the peaks of the produced FTO/ Anodic TiO2 were associated with the anatase phase of TiO2. According to the FTIR spectroscopy, the functional groups of the anodized TiO2 were obtained for the FTO/ Anodized TiO2. The electrocatalytic, photocatalytic, and photoelectrocatalytic degradation experiments were performed with the degradation of the dye solution of MB on the FTO/ Anodic TiO2 photoelectrode, and the rates of dye degradation were determined as 17.12%, 64.67%, and 82.12%, respectively.
Conclusion: This study showed that the methylene blue dye of FTO/ Anodic TiO2 is a suitable photoelectrode for electrocatalytic, photocatalytic, and photoelectrocatalytic degradation.
Graphical Abstract
[http://dx.doi.org/10.1016/j.rser.2018.03.065]
[http://dx.doi.org/10.1016/j.optmat.2021.111926]
[http://dx.doi.org/10.1016/j.mrgentox.2006.08.002] [PMID: 17027325]
[http://dx.doi.org/10.1016/j.cub.2017.05.064] [PMID: 28743020]
[http://dx.doi.org/10.15379/ijmst.v10i1.1069]
[http://dx.doi.org/10.1080/10643389.2017.1393263]
[http://dx.doi.org/10.1007/s10895-020-02591-2] [PMID: 32767189]
[http://dx.doi.org/10.1016/j.matchemphys.2019.122488]
[http://dx.doi.org/10.3390/membranes10120408] [PMID: 33321812]
[http://dx.doi.org/10.1080/03067319.2022.2047181]
[http://dx.doi.org/10.18038/aubtda.383584]
[http://dx.doi.org/10.55815/401361]
[http://dx.doi.org/10.1016/j.psep.2020.10.012]
[http://dx.doi.org/10.3390/pr8111395]
[http://dx.doi.org/10.1016/j.molliq.2020.112905]
[http://dx.doi.org/10.1016/j.electacta.2003.12.057]
[http://dx.doi.org/10.1016/j.vacuum.2016.12.049]
[http://dx.doi.org/10.1002/jbm.b.33038] [PMID: 24123999]
[http://dx.doi.org/10.1016/j.chemosphere.2022.134562] [PMID: 35413371]
[http://dx.doi.org/10.3390/nano11112823]
[http://dx.doi.org/10.1016/j.cattod.2016.10.022]
[http://dx.doi.org/10.1039/b514632a]
[http://dx.doi.org/10.1016/j.jallcom.2018.07.357]
[http://dx.doi.org/10.1016/j.ijhydene.2020.11.063]
[http://dx.doi.org/10.1016/j.jhazmat.2010.09.035] [PMID: 20933323]
[http://dx.doi.org/10.3390/ma14030510]
[http://dx.doi.org/10.1016/j.ceramint.2021.05.046]
[http://dx.doi.org/10.1039/C7RA01426K]
[http://dx.doi.org/10.1007/s40094-018-0290-3]
[http://dx.doi.org/10.1039/C6NJ02615J]
[http://dx.doi.org/10.1007/s11581-017-2244-1]
[http://dx.doi.org/10.1016/j.saa.2013.12.006] [PMID: 24374482]
[http://dx.doi.org/10.3390/nano12060989]
[http://dx.doi.org/10.1007/s13204-014-0337-y]
[http://dx.doi.org/10.1166/jnn.2018.14853] [PMID: 29442834]
[http://dx.doi.org/10.28948/ngumuh.1225826]
[http://dx.doi.org/10.3390/inorganics10090125]
[http://dx.doi.org/10.1016/j.diamond.2023.109918]
[http://dx.doi.org/10.2139/ssrn.4163968]
[http://dx.doi.org/10.1016/j.surfin.2023.103205]
[http://dx.doi.org/10.1016/j.rechem.2023.100825]
[http://dx.doi.org/10.3390/coatings13081472]
[http://dx.doi.org/10.1007/s11144-013-0616-8]
[http://dx.doi.org/10.3390/polym13132158] [PMID: 34208946]