Abstract
Introduction: This article explores a novel approach to developing an environmentally friendly structure through the implementation of eco-design, optimization, and sustainability. The process consists of three key steps.
Methods: Firstly, it begins with an understanding of eco-design principles aimed at enhancing the structure's durability by selecting relevant environmental aspects and design guidelines. Secondly, computer-aided design and optimization techniques are employed to identify efficient models, focusing specifically on lightweight structures. Lastly, the article discusses two different processes, namely injection molding and die casting, which can be used to minimize the environmental impact of the structure.
Results: The article emphasizes the significance of eco-friendly design in promoting sustainability within the automotive industry.
Conclusion: To validate these concepts, the study focuses on vehicle mirrors, which play a crucial role in improving driver visibility, safety, and situational awareness during driving, maneuvering, and parking.
[1]
Ourihi r, Fihri-Fassi H, El-Hilali F. The optimum size of pet prosthetic for additive manufacturing. Mater Today Proc 2021; 45(Part 6): 5725-31.
[http://dx.doi.org/10.1016/j.matpr.2021.02.5511]
[http://dx.doi.org/10.1016/j.matpr.2021.02.5511]
[2]
Jiang Z, Zhang H, Sutherland JW. Development of an environmental performance assessment method for manufacturing process plans. Int J Adv Manuf Technol 2012; 58(5-8): 783-90.
[http://dx.doi.org/10.1007/s00170-011-3410-7]
[http://dx.doi.org/10.1007/s00170-011-3410-7]
[3]
Paris H, Mokhtarian H, Coatanéa E, Museau M, Ituarte IF. Comparative environmental impacts of additive and subtractive manufacturing technologies. CIRP Ann 2016; 65(1): 29-32.
[http://dx.doi.org/10.1016/j.cirp.2016.04.036]
[http://dx.doi.org/10.1016/j.cirp.2016.04.036]
[4]
Corsi I, Venditti I, Trotta F, Punta C. Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation. Sci Total Environ 2023; 864: 161181.
[http://dx.doi.org/10.1016/j.scitotenv.2022.161181] [PMID: 36581299]
[http://dx.doi.org/10.1016/j.scitotenv.2022.161181] [PMID: 36581299]
[5]
Spreafico C, Landi D. Investigating students’ eco-misperceptions in applying eco-design methods. J Clean Prod 2022; 342: 130866.
[http://dx.doi.org/10.1016/j.jclepro.2022.130866]
[http://dx.doi.org/10.1016/j.jclepro.2022.130866]
[6]
Maccioni L, Borgianni Y, Pigosso DCA. Can the choice of eco-design principles affect products’ success? Design Science 2019; 5: e25.
[http://dx.doi.org/10.1017/dsj.2019.24]
[http://dx.doi.org/10.1017/dsj.2019.24]
[7]
Ibhadode O. Topology optimization for metal additive manufacturing: Current trends, challenges, and future outlook. Virtual Phys Prototyp 2023; 18(1): e2181192.
[http://dx.doi.org/10.1080/17452759.2023.2181192]
[http://dx.doi.org/10.1080/17452759.2023.2181192]
[8]
Yildiz AR. A new hybrid particle swarm optimization approach for structural design optimization in the automotive industry. Proc Inst Mech Eng, D J Automob Eng 2012; 226(10): 1340-51.
[http://dx.doi.org/10.1177/0954407012443636]
[http://dx.doi.org/10.1177/0954407012443636]
[9]
Nash JC. On best practice optimization methods in R. J Stat Softw 2014; 60(2): 1-14.
[http://dx.doi.org/10.18637/jss.v060.i02]
[http://dx.doi.org/10.18637/jss.v060.i02]
[10]
Jaganaa A. Prediction and optimization of sustainable production processes for automotive components. Progress in Sustainable Manufacturing. Singapore: Springer Nature Singapore 2023; pp. 97-117.
[11]
Mostafaei H. Sustainability Evaluation of a Concrete Gravity Dam: Life Cycle Assessment, Carbon Footprint Analysis, and Life Cycle Costing. Structures. Elsevier 2023; p. 53.
[12]
Oloruntobi O. Effective technologies and practices for reducing pollution in warehouses-a review. Clean Eng Technol 2023; 13: 100622.
[13]
Gross A. Sustainable mirrors: Materials and design considerations. J Sustain Dev 2017; 3(2): 45-62.
[14]
Chen S, Wang L, Li H. Environmental benefits of recycled materials in mirror production. J Mater Environ Sci 2019; 41(4): 321-35.
[15]
Smith J, Johnson M, Brown R. Energy-efficient manufacturing in sustainable mirror design. Sustain Prod Consum 2020; 8(1): 25-40.
[16]
Zhang Q, Li Y, Wang X. Minimizing chemical usage in sustainable mirror production. J Environ Chem Eng 2018; 6(2): 1805-13.
[17]
Davis P, White E. Energy-efficient lighting in sustainable mirror design. Light Res Technol 2019; 51(3): 285-300.
[18]
Brown A, Garcia M, Kim S. Daylighting integration in sustainable mirror design. Build Environ 2021; 85(1): 123-37.
[19]
Lee H, Kim Y, Park J. Recyclability and reuse of mirror glass in sustainable design. JRecycl Technol 2017; 12(4): 361-75.
[20]
Gupta R, Smith T, Patel A. Waste reduction strategies in sustainable mirror design. Waste Manag Res 2020; 38(7): 723-38.
[21]
Jones K, Johnson S. Educating consumers for sustainable mirror use: A case study. J Consum Behav 2018; 5(3): 157-70.
[22]
Wang X, Li H. Sustainability labels and certifications in the mirror industry. Int J Sustain Cer 2019; 7(4): 412-28.
[24]
Fihri-Fassi H, Ourihi R, Elahrach K. An integrated method involving design-manufacturing-environment applied in strutural optimization. Mater Today Proc 2021; 38: 135-8.
[http://dx.doi.org/10.1016/j.matpr.2020.06.118]
[http://dx.doi.org/10.1016/j.matpr.2020.06.118]
[25]
Lu F, Long K, Zhang C, Zhang J, Tao T. A novel design of the offshore wind turbine tripod structure using topology optimization methodology. Ocean Eng 2023; 280: 114607.
[http://dx.doi.org/10.1016/j.oceaneng.2023.114607]
[http://dx.doi.org/10.1016/j.oceaneng.2023.114607]
[27]
Del Serrone G, Moretti L. A stepwise regression to identify relevant variables affecting the environmental impacts of clinker production. J Clean Prod 2023; 398: 136564.
[http://dx.doi.org/10.1016/j.jclepro.2023.136564]
[http://dx.doi.org/10.1016/j.jclepro.2023.136564]
[28]
Çalışır D, Ekici S, Midilli A, Karakoc TH. Benchmarking environmental impacts of power groups used in a designed UAV: Hybrid hydrogen fuel cell system versus lithium-polymer battery drive system. Energy 2023; 262: 125543.
[http://dx.doi.org/10.1016/j.energy.2022.125543]
[http://dx.doi.org/10.1016/j.energy.2022.125543]
[29]
Albino V, Balice A, Dangelico RM. Environmental strategies and green product development: An overview on sustainability‐driven companies. Bus Strategy Environ 2009; 18(2): 83-96.
[http://dx.doi.org/10.1002/bse.638]
[http://dx.doi.org/10.1002/bse.638]
[30]
Rusch M, Schöggl JP, Baumgartner RJ. Application of digital technologies for sustainable product management in a circular economy: A review. Bus Strategy Environ 2023; 32(3): 1159-74.
[http://dx.doi.org/10.1002/bse.3099]
[http://dx.doi.org/10.1002/bse.3099]
[31]
D’Angelo V, Cappa F, Peruffo E. Green manufacturing for sustainable development: The positive effects of green activities, green investments, and non‐green products on economic performance. Bus Strategy Environ 2023; 32(4): 1900-13.
[http://dx.doi.org/10.1002/bse.3226]
[http://dx.doi.org/10.1002/bse.3226]
[32]
Keli A. Braitman, Volvo and Infiniti Drivers. Experiences With Select Crash Avoidance Technologies 2010; p. 09.
[http://dx.doi.org/10.1080/15389581003735600]
[http://dx.doi.org/10.1080/15389581003735600]
[33]
Melvin J, Kirk Russell J. Developments in Modern Racecar Driver Crash Protection and Safety: Engineering Beyond Performance. SAE International 2013.
[http://dx.doi.org/10.4271/PT-160]
[http://dx.doi.org/10.4271/PT-160]
[34]
Apollonov V, Barchukov A, Prokhorov A. Optical distortion of heated mirrors in CO<inf>2</inf>-laser systems. IEEE J Quantum Electron 1974; 10(6): 505-8.
[http://dx.doi.org/10.1109/JQE.1974.1068187]
[http://dx.doi.org/10.1109/JQE.1974.1068187]
[35]
Kim Y, Lee J, Chung SK. Heat-driven self-cleaning glass based on fast thermal response for automotive sensors. Physica Scripta 2023; 98(8): 085932.b.
[http://dx.doi.org/10.1088/1402-4896/ace38f]
[http://dx.doi.org/10.1088/1402-4896/ace38f]
[36]
Zheng W, Xu X, Gou Y, et al. Rational construction of multifunctional hydrophilic coatings with sustainable anti-fogging, UV-shielding and anti-freezing abilities. Chem Eng J 2023; 459: 141605.
[http://dx.doi.org/10.1016/j.cej.2023.141605]
[http://dx.doi.org/10.1016/j.cej.2023.141605]
[37]
Kandpal S, Ghosh T, Rani C, et al. Multifunctional electrochromic devices for energy applications. ACS Energy Lett 2023; 8(4): 1870-86.
[http://dx.doi.org/10.1021/acsenergylett.3c00159]
[http://dx.doi.org/10.1021/acsenergylett.3c00159]
[38]
Brioual B, Ghannam H, Rossi Z, et al. Effect of In-doping on electrochromic behavior of NiO thin films. Materialia 2023; 30: 101832.
[http://dx.doi.org/10.1016/j.mtla.2023.101832]
[http://dx.doi.org/10.1016/j.mtla.2023.101832]
[39]
Wang H, Shi W, Hou L, et al. Detection of the minimum concentrations of α-lactose solution using high-power THz-ATR spectroscopy. Front Bioeng Biotechnol 2023; 11: 1170218.
[http://dx.doi.org/10.3389/fbioe.2023.1170218] [PMID: 37034259]
[http://dx.doi.org/10.3389/fbioe.2023.1170218] [PMID: 37034259]
[40]
O’Kane T. Transport: Isuzu D-Max range strengthened by new 1.9 L Diesel base model. Electrical Connection 2022; 2: 78-82.
[41]
Tu R, Wu S, Chen Q, et al. A rail-to-rail high speed continuous time comparator for ToF application. IEICE Electron Express 2023; 20(18): 20230314.
[http://dx.doi.org/10.1587/elex.20.20230314]
[http://dx.doi.org/10.1587/elex.20.20230314]
[42]
Beresnev P. The development of a blind spot monitoring system for commercial vehicles. AIP Conf Proc. 2022; 2503: p. 080018.
[http://dx.doi.org/10.1063/5.0100045]
[http://dx.doi.org/10.1063/5.0100045]
[43]
Pawar KS. Blind-spot monitoring system using LiDAR. J Inst Eng (India): C 2022; 103(5): 1071-82.
[44]
Liu X, Pan W. Check for updates edge computing-based real-time blind spot monitoring system for tower cranes in construction. Proceedings of the 27th International Symposium on Advancement of Construction Management and Real Estate.
[45]
Bernhard C, Oberfeld D, Hecht H. Rear-view perception in driving: Distance information is privileged in the selection of safe gaps. Transp Res, Part F Traffic Psychol Behav 2022; 86: 263-80.
[http://dx.doi.org/10.1016/j.trf.2022.02.015]
[http://dx.doi.org/10.1016/j.trf.2022.02.015]
[46]
Malcolm L, Herriotts P. I can see clearly now: Developing a camera-based automotive rear-view mirror using a human-centred philosophy. Ergon Des 2022.
[http://dx.doi.org/10.1177/10648046211060656]
[http://dx.doi.org/10.1177/10648046211060656]
[47]
Daneshjo N, Mares A, Malega P, Francova Z. Cad model of rear-view mirror and simulation of its aerodynamics and noise. Int J Simul Model 2022; 21(2): 226-36.
[http://dx.doi.org/10.2507/IJSIMM21-2-598]
[http://dx.doi.org/10.2507/IJSIMM21-2-598]
[48]
Mazzae EN. Driver eye glance behavior and performance with camera-based visibility systems versus mirrors. Traffic Inj Prev 2023; 24(S1): S94-9.
[http://dx.doi.org/10.1080/15389588.2022.2155049]
[http://dx.doi.org/10.1080/15389588.2022.2155049]
Related Books
Mechanical Engineering Technologies and Applications
Mechanical Engineering Technologies and Applications
Facets of a Smart City: Computational and Experimental Techniques for Sustainable Urban Development
Soft Robotics
Advances in Manufacturing Technologies and Production Engineering
Advances in Additive Manufacturing Processes
Lean Management Solutions for Contemporary Manufacturing Operations
Mechanical Engineering Technologies and Applications
Global Emerging Innovation Summit (GEIS-2021)
