Contemporary Trends in Active and Intelligent Polymer Nanocomposite
based Food Packaging Systems for Food Safety and Sustainability in the
Modern Aeon

Jayant   Rajaram   Pawar; Rohan   Sharadanand   Phatak; Nilam   Mehmood.   Qureshi; Athoiba   Elangbam   Singh; Manish   Dipakrao   Shinde; Dinesh   Pundalik   Amalnerkar; Jaehyeok      Doh
doi:10.2174/2666145417666230712122748
Abstract

The demand for innovative solutions has arisen from the inevitability of improved packaging systems to protect processed food from various factors that cause spoilage. Traditional food packaging materials have limitations in fulfilling all the requirements of consumers, such as being inert, cheap, lightweight, easily degradable, reusable, and resistant to physical abuse. Nanofillers incorporated in the polymer matrix can provide potential solutions to these challenges. This review paper deliberates the use of nanofillers in a polymer matrix to develop an active and intelligent polymer nanocomposites-based processed food packaging system. The present review article focuses on the properties of nanofillers and their potential benefits when incorporated into the polymer matrix. It also examines the challenges associated with developing such packaging systems and explores the ways to address them. It highlights the potential of nanofiller-based polymer nanocomposites in developing a novel food packaging system that can improve the shelf-life and quality of processed food. Such systems can protect food from dirt or dust, oxygen, light, moisture, and food-spoiling microorganisms. Incorporating nanofillers can provide a viable solution to these problems. Most importantly, this paper provides research insights into the potential benefits of nanofillers-based polymer nanocomposites and their applications in the food packaging industry. The verdicts of this review will be of interest to the food packaging industry, entrepreneurs and researchers interested in developing sustainable and innovative packaging systems.
« Previous Next »
Graphical Abstract

[1]
Declaration of the world summit on food security. 2009. Available from: https://www.fao.org/fileadmin/templates/wsfs/Summit/Docs/Final_Declaration/WSFS09_Declaration.pdf

[2]
Food safety. 2022. Available from: https://www.who.int/news-room/fact-sheets/detail/foodsafety

[3]
Duncan TV. Applications of nanotechnology in food packaging and food safety: Barrier materials, antimicrobials and sensors. J Colloid Interface Sci  2011; 363(1): 1-24.
 [http://dx.doi.org/10.1016/j.jcis.2011.07.017] [PMID: 21824625]

[4]
Marsh K, Bugusu B. Food packaging--roles, materials, and environmental issues. J Food Sci  2007; 72(3): R39-55.
 [http://dx.doi.org/10.1111/j.1750-3841.2007.00301.x] [PMID: 17995809]

[5]
Azeredo HMC. Nanocomposites for food packaging applications. Food Res Int  2009; 42(9): 1240-53.
 [http://dx.doi.org/10.1016/j.foodres.2009.03.019]

[6]
Vaidya UR, Bhattacharya M. Properties of blends of starch and synthetic polymers containing anhydride groups. J Appl Polym Sci  1994; 52(5): 617-28.
 [http://dx.doi.org/10.1002/app.1994.070520505]

[7]
Dufresne A, Vignon MR. Improvement of starch film performances using cellulose microfibrils. Macromolecules  1998; 31(8): 2693-6.
 [http://dx.doi.org/10.1021/ma971532b]

[8]
Tharanathan RN. Biodegradable films and composite coatings: Past, present and future. Trends Food Sci Technol  2003; 14(3): 71-8.
 [http://dx.doi.org/10.1016/S0924-2244(02)00280-7]

[9]
Qureshi N, Shinde M, Arbuj S, et al. Sol–Gel assisted isotropic morphological progression in nanostructured MoO3 and allied investigations on photocatalytic dye-degradation. J Nanosci Nanotechnol  2019; 19(6): 3479-86.
 [http://dx.doi.org/10.1166/jnn.2019.16139] [PMID: 30744775]

[10]
Hussain F, Hojjati M, Okamoto M, Gorga RE. Review article: Polymer-matrix nanocomposites, processing, manufacturing, and application: An overview. J Compos Mater  2006; 40(17): 1511-75.
 [http://dx.doi.org/10.1177/0021998306067321]

[11]
Chrissopoulou K, Anastasiadis SH. Polyolefin/layered silicate nanocomposites with functional compatibilizers. Eur Polym J  2011; 47(4): 600-13.
 [http://dx.doi.org/10.1016/j.eurpolymj.2010.09.028]

[12]
Azizi Samir MAS, Alloin F, Dufresne A. Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules  2005; 6(2): 612-26.
 [http://dx.doi.org/10.1021/bm0493685] [PMID: 15762621]

[13]
Dalmas F, Cavaillé JY, Gauthier C, Chazeau L, Dendievel R. Viscoelastic behavior and electrical properties of flexible nanofiber filled polymer nanocomposites. Influence of processing conditions. Compos Sci Technol  2007; 67(5): 829-39.
 [http://dx.doi.org/10.1016/j.compscitech.2006.01.030]

[14]
Kutvonen A, Rossi G, Puisto SR, Rostedt NKJ, Ala-Nissila T. Influence of nanoparticle size, loading, and shape on the mechanical properties of polymer nanocomposites. J Chem Phys  2012; 137(21): 214901.
 [http://dx.doi.org/10.1063/1.4767517] [PMID: 23231257]

[15]
Pérez-Esteve E, Bernardos A, Martínez-Máñez R, Barat JM. Nanotechnology in the development of novel functional foods or their package. An overview based in patent analysis. Recent Pat Food Nutr Agric  2013; 5(1): 35-43.
 [http://dx.doi.org/10.2174/2212798411305010006] [PMID: 22963076]

[16]
Dilbaghi N, Sharma S. Food spoilage, food infections and intoxications caused by microorganisms and methods for their detection. Food Indust Microbiol.   2007; pp. 2-42.

[17]
Li X, Zhang R, Hassan MM, et al. Active packaging for the extended shelf-life of meat: perspectives from consumption habits, market requirements and packaging practices in China and New Zealand. Foods  2022; 11(18): 2903.
 [http://dx.doi.org/10.3390/foods11182903] [PMID: 36141031]

[18]
Aiking H, de Boer J. Food sustainability. Br Food J  2004; 106(5): 359-65.
 [http://dx.doi.org/10.1108/00070700410531589]

[19]
Capone R, Bilali HE, Debs P, Cardone G, Driouech N. Food system sustainability and food security: Connecting the dots. J Food Secur  2014; 2(1): 13-22.

[20]
Helms M. Food sustainability, food security and the environment. Br Food J  2004; 106(5): 380-7.
 [http://dx.doi.org/10.1108/00070700410531606]

[21]
Martinelli SS, Cavalli SB. Healthy and sustainable diet: A narrative review of the challenges and perspectives. Cien Saude Colet  2019; 24(11): 4251-62.
 [http://dx.doi.org/10.1590/1413-812320182411.30572017] [PMID: 31664397]

[22]
Gustavsson J, Cederberg C, Sonesson U. Global food losses and food waste-Extent, causes and prevention. Rome: FAO 2011.

[23]
Rawat MS. Food Spoilage: Microorganisms and their prevention. Asian J Plant Sci Res  2015; (5): 47-56.

[24]
Rahman MS. Handbook of food preservation.  (2nd ed.), CRC Press 2007.
 [http://dx.doi.org/10.1201/9781420017373]

[25]
Sarkar P, Irshaan S, Sivapratha S, Choudhary R. Nanotechnology in food processing and packaging. In: Ranjan S, Dasgupta N, Lichtfouse E, Eds. Nanoscience in Food and Agriculture.   2016; pp. 185-227.
 [http://dx.doi.org/10.1007/978-3-319-39303-2_7]

[26]
Brody AL, Bugusu B, Han JH, Sand CK, McHugh TH. Innovative food packaging solutions. Scientific status summary. J Food Sci  2008; 73(8): R107-16.
 [http://dx.doi.org/10.1111/j.1750-3841.2008.00933.x] [PMID: 19019124]

[27]
Vasut RG, Robeci MD. Food contamination with Psychrophilic bacteria. Lucră Ştiinţ Med Vet  2009; XLII(2): 325-30.

[28]
Beauty Dlamini S, Njie Ateba C. Isolation of Corynebacterium species from retail mutton and lamb in the North West Province, South Africa. J Food Nutr Res (Newark)  2014; 2(7): 377-82.
 [http://dx.doi.org/10.12691/jfnr-2-7-8]

[29]
Ercolini D, Russo F, Nasi A, Ferranti P, Villani F. Mesophilic and psychrotrophic bacteria from meat and their spoilage potential in vitro and in beef. Appl Environ Microbiol  2009; 75(7): 1990-2001.
 [http://dx.doi.org/10.1128/AEM.02762-08] [PMID: 19201980]

[30]
Knowles T. Food Safety in the Hospitality Industry.  (1st ed.),  2002.

[31]
Stajich JE, Berbee ML, Blackwell M, et al. The Fungi. Curr Biol  2009; 19(18): R840-5.
 [http://dx.doi.org/10.1016/j.cub.2009.07.004] [PMID: 19788875]

[32]
Burdon KL. A Textbook of Microbiology. New York: Macmillan Co 1947.
 [http://dx.doi.org/10.5962/bhl.title.154240]

[33]
André S, Zuber F, Remize F. Thermophilic spore-forming bacteria isolated from spoiled canned food and their heat resistance. Results of a French ten-year survey. Int J Food Microbiol  2013; 165(2): 134-43.
 [http://dx.doi.org/10.1016/j.ijfoodmicro.2013.04.019] [PMID: 23728430]

[34]
Liang J, Huang H, Wang S. Distribution, evolution, catalytic mechanism, and physiological functions of the flavinbased electron-bifurcating nadh-dependent reduced ferredoxin: NADP+ oxidoreductase. Front Microbiol  2019; 10: 373.
 [http://dx.doi.org/10.3389/fmicb.2019.00373] [PMID: 30881354]

[35]
Coles R, Kirwan M. Food and Beverage Packaging Technology.  (2nd ed.), Wiley- Blackwell 2011.
 [http://dx.doi.org/10.1002/9781444392180]

[36]
Twede D, Selke SEM, Kamdem DP, David S. Cartons, Crates and Corrugated Board.Handbook of Paper and Wood Packaging Technology. 2nd Ed 2014.

[37]
Robertson GL. Food Packaging: Principles and Practice. Switzerland: Marcel Dekker 1998.

[38]
Finnigan B. Barrier Polymers The Wiley Encyclopedia of Packaging Technology.  New York: John Wiley and Sons, Inc. 2009; pp. 103-9.

[39]
Lagaron J, Sanchez-Garcia M, Gimenez E. Thermoplastic nanobiocomposites for rigid and flexible food packaging applications. 2008.

[40]
Kato M, Usuki A, Hasegawa N, Okamoto H, Kawasumi M. Development and applications of polyolefin– and rubber–clay nanocomposites. Polym J  2011; 43(7): 583-93.
 [http://dx.doi.org/10.1038/pj.2011.44]

[41]
Lee JW, Son SM, Hong SI. Characterization of proteincoated polypropylene films as a novel composite structure for active food packaging application. J Food Eng  2008; 86(4): 484-93.
 [http://dx.doi.org/10.1016/j.jfoodeng.2007.10.025]

[42]
Leszczyńska A, Njuguna J, Pielichowski K, Banerjee JR. Polymer/montmorillonite nanocomposites with improved thermal properties. Thermochim Acta  2007; 454(1): 1-22.
 [http://dx.doi.org/10.1016/j.tca.2006.11.003]

[43]
Ray SS, Yamada K, Ogami A, Okamoto M, Ueda K. New polylactide/layered silicate nanocomposite: Nanoscale control over multiple properties. Macromol Rapid Commun  2002; 23(16): 943-7.
 [http://dx.doi.org/10.1002/1521-3927(200211)23:16<943:AID-MARC943>3.0.CO;2-F]

[44]
Singh A, Sharma PK, Malviya R. Ecofriendly pharmaceutical packaging material. World Appl Sci J  2011; 14(11): 1703-16.

[45]
Janjarasskul T, Tananuwong K, Krochta JM. Whey protein film with oxygen scavenging function by incorporation of ascorbic acid. J Food Sci  2011; 76(9): E561-8.
 [http://dx.doi.org/10.1111/j.1750-3841.2011.02409.x] [PMID: 22416701]

[46]
Yoo S, Krochta JM. Starch-methylcellulose-whey protein film properties. Int J Food Sci Technol  2012; 47(2): 255-61.
 [http://dx.doi.org/10.1111/j.1365-2621.2011.02833.x]

[47]
Ebnesajjad S. Plastic films in food packaging materials, technology and applications. PDL Handbook Series 2013.
 [http://dx.doi.org/10.1016/C2012-0-00246-3]

[48]
Dixon J. Packaging materials: 9 multilayer packaging for food and beverages.  ILSI Europe 2011; p. 48.

[49]
Giles HF, Wagner JR, Mount EM. Extrusion: The definitive processing guide and handbook PDL Handbook Series. William Andrew Publishing 2007.

[50]
Alexandre M, Dubois P. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng Rep  2000; 28(1-2): 1-63.
 [http://dx.doi.org/10.1016/S0927-796X(00)00012-7]

[51]
Alexandre B, Langevin D, Médéric P, et al. Water barrier properties of polyamide 12/montmorillonite nanocomposite membranes: Structure and volume fraction effects. J Membr Sci  2009; 328(1-2): 186-204.
 [http://dx.doi.org/10.1016/j.memsci.2008.12.004]

[52]
Sorrentino A, Gorrasi G, Vittoria V. Potential perspectives of bio-nanocomposites for food packaging applications. Trends Food Sci Technol  2007; 18(2): 84-95.
 [http://dx.doi.org/10.1016/j.tifs.2006.09.004]

[53]
Pandey JK, Takagi H, Nakagaito AN, Kim HJ. Polymer Nanocomposites of Cellulose Nanoparticles.Handbook of Polymer Nanocomposites Processing, Performance and Application.  Heidelberg: Springer Berlin 2015; C.
 [http://dx.doi.org/10.1007/978-3-642-45232-1]

[54]
Joshi M, Banerjee K, Prasanth R, Thakare V. Polymer/clay nanocomposite based coatings for enhanced gas barrier property. Indian J Fibre Text Res  2006; 31(1): 202-14.

[55]
Shori S, Chen X, Peralta M, Gao H, zur Loye HC, Ploehn HJ. Effect of interfacial pretreatment on the properties of
montmorillonite/poly(vinyl alcohol) nanocomposites. J Appl Polym Sci  2015; 132(18) n/a.
 [http://dx.doi.org/10.1002/app.41867]

[56]
Qian X, Tai Q, Song L, Hu Y, Yuen RKK. Thermal degradation and flame-retardant properties of epoxy acrylate resins modified with a novel flame retardant containing phosphorous and nitrogen. Fire Safety Science International Association for Fire Safety Science  2014; 883-94.

[57]
Rajini N, Jappes JTW, Jeyaraj P, Rajakarunakaran S, Bennet C. Effect of montmorillonite nanoclay on temperature dependence mechanical properties of naturally woven coconut sheath/polyester composite. J Reinf Plast Compos  2013; 32(11): 811-22.
 [http://dx.doi.org/10.1177/0731684413475721]

[58]
Li YC, Schulz J, Grunlan JC. Polyelectrolyte/nanosilicate thin-film assemblies: influence of pH on growth, mechanical behavior, and flammability. ACS Appl Mater Interfaces  2009; 1(10): 2338-47.
 [http://dx.doi.org/10.1021/am900484q] [PMID: 20355871]

[59]
Gorrasi G, Tortora M, Vittoria V, Pollet E, Alexandre M, Dubois P. Physical properties of poly(ε-caprolactone) layered silicate nanocomposites prepared by controlled grafting polymerization. J Polym Sci, B, Polym Phys  2004; 42(8): 1466-75.
 [http://dx.doi.org/10.1002/polb.20042]

[60]
Ray SS, Bousmina M. Poly(butylene sucinate-coadipate)/montmorillonite nanocomposites: effect of organic modifier miscibility on structure, properties, and viscoelasticity. Polymer (Guildf)  2005; 46(26): 12430-9.
 [http://dx.doi.org/10.1016/j.polymer.2005.10.102]

[61]
Gu SY, Ren J, Dong B. Melt rheology of polylactide/montmorillonite nanocomposites. J Polym Sci, B, Polym Phys  2007; 45(23): 3189-96.
 [http://dx.doi.org/10.1002/polb.21317]

[62]
Rodionova G, Lenes M, Eriksen Ø, Gregersen Ø. Surface chemical modification of microfibrillated cellulose: improvement of barrier properties for packaging applications. Cellulose  2011; 18(1): 127-34.
 [http://dx.doi.org/10.1007/s10570-010-9474-y]

[63]
Suyatma NE, Copinet A, Tighzert L, Coma V. Mechanical and barrier properties of biodegradable films made from chitosan and poly (lactic acid) blends. J Polym Environ  2004; 12(1): 1-6.
 [http://dx.doi.org/10.1023/B:JOOE.0000003121.12800.4e]

[64]
Panayotidou E, Baklavaridis A, Zuburtikudis I, Achilias DS. Nanocomposites of poly(3-hydroxybutyrate)/organomodified montmorillonite: Effect of the nanofiller on the polymer’s biodegradation. J Appl Polym Sci  2015; 132(11): 41656.

[65]
Makadia HK, Siegel SJ. Poly Lactic-co-Glycolic Acid (PLGA) as biodegradable controlled drug delivery carrier. Polymers (Basel)  2011; 3(3): 1377-97.
 [http://dx.doi.org/10.3390/polym3031377] [PMID: 22577513]

[66]
Li S, McCarthy S. Influence of crystallinity and stereochemistry on the enzymatic degradation of poly(lactide)s. Macromolecules  1999; 32(13): 4454-6.
 [http://dx.doi.org/10.1021/ma990117b]

[67]
Wu CL, Zhang MQ, Rong MZ, Friedrich K. Tensile performance improvement of low nanoparticles filledpolypropylene composites. Compos Sci Technol  2002; 62(10-11): 1327-40.
 [http://dx.doi.org/10.1016/S0266-3538(02)00079-9]

[68]
Zhang YQ, Wang X, Yu PL, Sun WF. Water-Tree Resistant Characteristics of Crosslinker-Modified-SiO2/XLPE Nanocomposites. Materials (Basel)  2021; 14(6): 1398.
 [http://dx.doi.org/10.3390/ma14061398] [PMID: 33805708]

[69]
Tang S, Zou P, Xiong H, Tang H. Effect of nano-SiO2 on the performance of starch/polyvinyl alcohol blend films. Carbohydr Polym  2008; 72(3): 521-6.
 [http://dx.doi.org/10.1016/j.carbpol.2007.09.019]

[70]
Jia X, Li Y, Cheng Q, Zhang S, Zhang B. Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate. Eur Polym J  2007; 43(4): 1123-31.
 [http://dx.doi.org/10.1016/j.eurpolymj.2007.01.019]

[71]
Zhou X, Shin E, Wang KW, Bakis CE. Interfacial damping characteristics of carbon nanotube-based composites. Compos Sci Technol  2004; 64(15): 2425-37.
 [http://dx.doi.org/10.1016/j.compscitech.2004.06.001]

[72]
Chen W, Tao X, Xue P, Cheng X. Enhanced mechanical properties and morphological characterizations of poly(vinyl alcohol)–carbon nanotube composite films. Appl Surf Sci  2005; 252(5): 1404-9.
 [http://dx.doi.org/10.1016/j.apsusc.2005.02.138]

[73]
Bin Y, Mine M, Koganemaru A, Jiang X, Matsuo M. Morphology and mechanical and electrical properties of oriented PVA–VGCF and PVA–MWNT composites. Polymer (Guildf)  2006; 47(4): 1308-17.
 [http://dx.doi.org/10.1016/j.polymer.2005.12.032]

[74]
Zeng H, Gao C, Wang Y, et al. in situ polymerization approach to multiwalled carbon nanotubes-reinforced nylon 1010 composites: Mechanical properties and crystallization behavior. Polymer (Guildf)  2006; 47(1): 113-22.
 [http://dx.doi.org/10.1016/j.polymer.2005.11.009]

[75]
Morlat-Therias S, Fanton E, Gardette JL, Peeterbroeck S, Alexandre M, Dubois P. Polymer/carbon nanotube nanocomposites: Influence of carbon nanotubes on EVA photodegradation. Polym Degrad Stabil  2007; 92(10): 1873-82.
 [http://dx.doi.org/10.1016/j.polymdegradstab.2007.06.021]

[76]
Kim JY, Han SI, Kim SH. Crystallization behaviors and mechanical properties of poly(ethylene 2,6-naphthalate)/multiwall carbon nanotube nanocomposites. Polym Eng Sci  2007; 47(11): 1715-23.
 [http://dx.doi.org/10.1002/pen.20789]

[77]
Thiruvengadam M, Rajakumar G, Swetha V, et al. Recent insights and multifactorial applications of carbon nanotubes. Micromachines (Basel)  2021; 12(12): 1502.
 [http://dx.doi.org/10.3390/mi12121502] [PMID: 34945354]

[78]
Vashist A, Kaushik A, Vashist A, et al. Advances in carbon nanotubes-hydrogel hybrids in nanomedicine for therapeutics. Adv Healthc Mater  2018; 7(9): 1701213.
 [http://dx.doi.org/10.1002/adhm.201701213] [PMID: 29388356]

[79]
Hu M, Zhao Z, Tian F, et al. Compressed carbon nanotubes: A family of new multifunctional carbon allotropes. Sci Rep  2013; 3(1): 1331.
 [http://dx.doi.org/10.1038/srep01331] [PMID: 23435585]

[80]
Prashantha K, Soulestin J, Lacrampe MF, et al. Taguchi analysis of shrinkage and warpage of injection-moulded polypropylene/multiwall carbon nanotubes nanocomposites. Express Polym Lett  2009; 3(10): 630-8.
 [http://dx.doi.org/10.3144/expresspolymlett.2009.79]

[81]
Wang J, Wang X, Xu C, Zhang M, Shang X. Preparation of graphene/poly(vinyl alcohol) nanocomposites with enhanced mechanical properties and water resistance. Polym Int  2011; 60(5): 816-22.
 [http://dx.doi.org/10.1002/pi.3025]

[82]
Bao C, Guo Y, Song L, Hu Y. Poly(vinyl alcohol) nanocomposites based on graphene and graphite oxide: a comparative investigation of property and mechanism. J Mater Chem  2011; 21(36): 13942-50.
 [http://dx.doi.org/10.1039/c1jm11662b]

[83]
Kwon H, Kim D, Seo J, Han H. Enhanced moisture barrier films based on EVOH/exfoliated graphite (EGn) nanocomposite films by solution blending. Macromol Res  2013; 21(9): 987-94.
 [http://dx.doi.org/10.1007/s13233-013-1124-4]

[84]
Chakraborty S, Sahoo B, Teraoka I, Miller LM, Gross RA. Enzyme-catalyzed regioselective modification of starch nanoparticles. Macromolecules  2005; 38(1): 61-8.
 [http://dx.doi.org/10.1021/ma048842w]

[85]
Chen Y, Cao X, Chang PR, Huneault MA. Comparative study on the films of poly(vinyl alcohol)/pea starch nanocrystals and poly(vinyl alcohol)/native pea starch. Carbohydr Polym  2008; 73(1): 8-17.
 [http://dx.doi.org/10.1016/j.carbpol.2007.10.015]

[86]
Zheng H, Ai F, Chang PR, Huang J, Dufresne A. Structure and properties of starch nanocrystal-reinforced soy protein plastics. Polym Compos  2009; 30(4): 474-80.
 [http://dx.doi.org/10.1002/pc.20612]

[87]
García NL, Ribba L, Dufresne A, Aranguren M, Goyanes S. Effect of glycerol on the morphology of nanocomposites made from thermoplastic starch and starch nanocrystals. Carbohydr Polym  2011; 84(1): 203-10.
 [http://dx.doi.org/10.1016/j.carbpol.2010.11.024]

[88]
García NL, Famá L, D’Accorso NB, Goyanes S. Biodegradable starch nanocomposites. Adv Structur Mater  2015; 75: 17-77.
 [http://dx.doi.org/10.1007/978-81-322-2470-9_2]

[89]
Bilbao-Sáinz C, Avena-Bustillos RJ, Wood DF, Williams TG, McHugh TH. Composite edible films based on hydroxypropyl methylcellulose reinforced with microcrystalline cellulose nanoparticles. J Agric Food Chem  2010; 58(6): 3753-60.
 [http://dx.doi.org/10.1021/jf9033128] [PMID: 20187652]

[90]
Kaushik A, Singh M, Verma G. Green nanocomposites based on thermoplastic starch and steam exploded cellulose nanofibrils from wheat straw. Carbohydr Polym  2010; 82(2): 337-45.
 [http://dx.doi.org/10.1016/j.carbpol.2010.04.063]

[91]
Bilbao-Sainz C, Bras J, Williams T, Sénechal T, Orts W. HPMC reinforced with different cellulose nano-particles. Carbohydr Polym  2011; 86(4): 1549-57.
 [http://dx.doi.org/10.1016/j.carbpol.2011.06.060]

[92]
Editors Decher G, Schlenoff JB. Multilayer Thin Films: Sequential Assembly of Nanocomposite Materials.  (2nd ed.), Wiley Publisher 2012.
 [http://dx.doi.org/10.1002/9783527646746]

[93]
Azeredo HMC, Miranda KWE, Rosa MF, Nascimento DM, de Moura MR. Edible films from alginate-acerola puree reinforced with cellulose whiskers. Lebensm Wiss Technol  2012; 46(1): 294-7.
 [http://dx.doi.org/10.1016/j.lwt.2011.09.016]

[94]
Ravi Kumar MNV. A review of chitin and chitosan applications. React Funct Polym  2000; 46(1): 1-27.
 [http://dx.doi.org/10.1016/S1381-5148(00)00038-9]

[95]
de Moura MR, Lorevice MV, Mattoso LHC, Zucolotto V. Highly stable, edible cellulose films incorporating chitosan nanoparticles. J Food Sci  2011; 76(2): N25-9.
 [http://dx.doi.org/10.1111/j.1750-3841.2010.02013.x] [PMID: 21535782]

[96]
Lorevice MV, Moura MR, Aouada FA, Mattoso LHC. Development of novel guava puree films containing chitosan nanoparticles. J Nanosci Nanotechnol  2012; 12(3): 2711-7.
 [http://dx.doi.org/10.1166/jnn.2012.5716] [PMID: 22755113]

[97]
Huff K. Active and intelligent packaging: Innovations for the future. 2008. Available from: https://www.iopp.org/files/public/virginiatechkarleighhuff.pdf

[98]
Kuswandi B. Nanotechnology in food packagingNanoscience in Food and Agriculture 1 Sustainable Agriculture Reviews.  Cham: Springer 2016; Vol. 20.
 [http://dx.doi.org/10.1007/978-3-319-39303-2_6]

[99]
Robertson GL. Food Packaging: Principles and Practice.  (2nd ed.), CRC Press 2005.
 [http://dx.doi.org/10.1201/9781420056150]

[100]
Restuccia D, Spizzirri UG, Parisi OI, et al. New EU regulation aspects and global market of active and intelligent packaging for food industry applications. Food Control  2010; 21(11): 1425-35.
 [http://dx.doi.org/10.1016/j.foodcont.2010.04.028]

[101]
Restuccia D, Puoci F, Parisi OI, Picci N. Food applications of active and intelligent packaging: legal issues and safety concerns. 2015.
 [http://dx.doi.org/10.1002/9781119109785.ch12]

[102]
Meng X, Kim S, Puligundla P, Ko S. Carbon dioxide and oxygen gas sensors-possible application for monitoring quality, freshness, and safety of agricultural and food products with emphasis on importance of analytical signals and their transformation. J Korean Soc Appl Biol Chem  2014; 57(6): 723-33.
 [http://dx.doi.org/10.1007/s13765-014-4180-3]

[103]
Kleinfeld ER, Ferguson GS. Stepwise formation of multilayered nanostructural films from macromolecular precursors. Science  1994; 265(5170): 370-3.
 [http://dx.doi.org/10.1126/science.265.5170.370] [PMID: 17838039]

[104]
Hammond PT. Form and function in multilayer assembly: New applications at the nanoscale. Adv Mater  2004; 16(15): 1271-93.
 [http://dx.doi.org/10.1002/adma.200400760]

[105]
Carosio F, Laufer G, Alongi J, Camino G, Grunlan JC. Layer-by-layer assembly of silica-based flame retardant thin film on PET fabric. Polym Degrad Stabil  2011; 96(5): 745-50.
 [http://dx.doi.org/10.1016/j.polymdegradstab.2011.02.019]

[106]
Podsiadlo P, Shim BS, Kotov NA. Polymer/clay and polymer/carbon nanotube hybrid organic–inorganic multilayered composites made by sequential layering of nanometer scale films. Coord Chem Rev  2009; 253(23-24): 2835-51.
 [http://dx.doi.org/10.1016/j.ccr.2009.09.004]

[107]
Choudalakis G, Gotsis AD. Permeability of polymer/clay nanocomposites: A review. Eur Polym J  2009; 45(4): 967-84.
 [http://dx.doi.org/10.1016/j.eurpolymj.2009.01.027]

[108]
Choudalakis G, Gotsis AD. Recent Developments in the Permeability of Polymer Clay NanocompositesHandbook of Polymer nanocomposites Processing, Performance and Application.  Berlin, Heidelberg: Springer 2014; pp. 415-51.
 [http://dx.doi.org/10.1007/978-3-642-38649-7_11]

[109]
Nielsen LE. Models for the permeability of filled polymer systems. J Macromol Sci Chem  1967; 1(5): 929-42.
 [http://dx.doi.org/10.1080/10601326708053745]

[110]
Sun L, Boo WJ, Clearfield A, Sue HJ, Pham HQ. Barrier properties of model epoxy nanocomposites. J Membr Sci  2008; 318(1-2): 129-36.
 [http://dx.doi.org/10.1016/j.memsci.2008.02.041]

[111]
Yang C, Smyrl WH, Cussler EL. Flake alignment in composite coatings. J Membr Sci  2004; 231(1-2): 1-12.
 [http://dx.doi.org/10.1016/j.memsci.2003.09.022]

[112]
Lape NK, Nuxoll EE, Cussler EL. Polydisperse flakes in barrier films. J Membr Sci  2004; 236(1-2): 29-37.
 [http://dx.doi.org/10.1016/j.memsci.2003.12.026]

[113]
Picard E, Vermogen A, Gérard J, Espuche E. Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: Influence of the clay content and dispersion stateConsequences on modelling. J Membr Sci  2007; 292(1-2): 133-44.
 [http://dx.doi.org/10.1016/j.memsci.2007.01.030]

[114]
Dunkerley E, Schmidt D. Effects of composition, orientation and temperature on the O2 permeability of model polymer/clay nanocomposites. Macromolecules  2010; 43(24): 10536-44.
 [http://dx.doi.org/10.1021/ma1018846]

[115]
Ten E, Vermerris W. Functionalized polymers from lignocellulosic biomass: State of the art. Polymers (Basel)  2013; 5(2): 600-42.
 [http://dx.doi.org/10.3390/polym5020600]

[116]
Helbert W, Cavaillé JY, Dufresne A. Thermoplastic nanocomposites filled with wheat straw cellulose whiskers. Part I: Processing and mechanical behavior. Polym Compos  1996; 17(4): 604-11.
 [http://dx.doi.org/10.1002/pc.10650]

[117]
Cranston ED, Gray DG. Formation of cellulose-based electrostatic layer-by-layer films in a magnetic field. Sci Technol Adv Mater  2006; 7(4): 319-21.
 [http://dx.doi.org/10.1016/j.stam.2006.02.007]

[118]
Jean B, Dubreuil F, Heux L, Cousin F. Structural details of cellulose nanocrystals/polyelectrolytes multilayers probed by neutron reflectivity and AFM. Langmuir  2008; 24(7): 3452-8.
 [http://dx.doi.org/10.1021/la703045f] [PMID: 18324845]

[119]
Mohanty S, Nayak S, Kaith B, Kalia S. Polymer nanocomposites based on inorganic and organic nanomaterials. Scrivener Publishing LLC 2015.
 [http://dx.doi.org/10.1002/9781119179108]

[120]
Chawla PR, Bajaj IB, Survase SA, Singhal RS. Microbial cellulose: Fermentative production and applications. Food Technol Biotechnol  2009; 47(2): 107-24.

[121]
Kim Y, Jung R, Kim HS, Jin HJ. Transparent nanocomposites prepared by incorporating microbial nanofibrils into poly(l-lactic acid). Curr Appl Phys  2009; 9(1): S69-71.
 [http://dx.doi.org/10.1016/j.cap.2008.08.010]

[122]
Raghunathan D. Production of microbial cellulose from the new bacterial strain isolated from temple wash waters. Int J Curr Microbiol Appl Sci  2013; 2(12): 275-90.

[123]
Nakagaito AN, Iwamoto S, Yano H. Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composites. Appl Phys, A Mater Sci Process  2005; 80(1): 93-7.
 [http://dx.doi.org/10.1007/s00339-004-2932-3]

[124]
Kvien I, Oksman K. Orientation of cellulose nanowhiskers in polyvinyl alcohol. Appl Phys, A Mater Sci Process  2007; 87(4): 641-3.
 [http://dx.doi.org/10.1007/s00339-007-3882-3]

[125]
Siqueira G, Bras J, Dufresne A. Cellulosic bionanocomposites: A review of preparation, properties and applications. Polymers (Basel)  2010; 2(4): 728-65.
 [http://dx.doi.org/10.3390/polym2040728]

[126]
Kalia S, Dufresne A, Cherian BM, et al. Cellulose-based bio- and nanocomposites: A review. Int J Polym Sci  2011; 2011: 1-35.
 [http://dx.doi.org/10.1155/2011/837875]

[127]
Oksman K, Mathew AP, Bondeson D, Kvien I. Manufacturing process of cellulose whiskers/polylactic acid nanocomposites. Compos Sci Technol  2006; 66(15): 2776-84.
 [http://dx.doi.org/10.1016/j.compscitech.2006.03.002]

[128]
Petersson L, Kvien I, Oksman K. Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials. Compos Sci Technol  2006; 66(15): 2535-44.

[129]
Sanchez-Garcia MD, Gimenez E, Lagaron JM. Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers. Carbohydr Polym  2008; 71(2): 235-44.
 [http://dx.doi.org/10.1016/j.carbpol.2007.05.041]

[130]
Sanchez-Garcia MD, Lagaron JM. On the use of plant cellulose nanowhiskers to enhance the barrier properties of polylactic acid. Cellulose  2010; 17(5): 987-1004.
 [http://dx.doi.org/10.1007/s10570-010-9430-x]

[131]
Bondeson D, Oksman K. Polylactic acid/cellulose whisker nanocomposites modified by polyvinyl alcohol. Compos, Part A Appl Sci Manuf  2007; 38(12): 2486-92.
 [http://dx.doi.org/10.1016/j.compositesa.2007.08.001]

[132]
Hubbe MA, Rojas OJ, Lucia LA, Sain M. Cellulosic nanocomposites. A review. BioResources  2008; 3(3): 929-80.
 [http://dx.doi.org/10.15376/biores.3.3.929-980]

[133]
Winarti C. Widaningrum, Surono IS, Uswah M. Widaningrum, Surono IS, Uswah M. Effect of acid and hydrolysis duration on the characteristics of arrowroot and taro starch nanoparticles. IOP Conf Ser Earth Environ Sci  2019; 309(1): 012039.
 [http://dx.doi.org/10.1088/1755-1315/309/1/012039]

[134]
Kristo E, Biliaderis C. Physical properties of starch nanocrystal-reinforced pullulan films. Carbohydr Polym  2007; 68(1): 146-58.
 [http://dx.doi.org/10.1016/j.carbpol.2006.07.021]

[135]
Jiang T, Duan Q, Zhu J, Liu H, Yu L. Starch-based biodegradable materials: Challenges and opportunities. Adv Industr Eng Polymer Res  2020; 3(1): 8-18.
 [http://dx.doi.org/10.1016/j.aiepr.2019.11.003]

[136]
Ni Y, Jing Y, Jiang Q, Gao R. Combination of starch and nano-chitin whiskers for surface treatment of cellulosic paper. Stärke  2021; 73(5-6): 2000219.
 [http://dx.doi.org/10.1002/star.202000219]

[137]
Mincea M, Negrulescu A, Ostafe V. Preparation, modification, and applications of chitin nanowhiskers: A review. Rev Adv Mater Sci  2012; 30: 225-42.

[138]
Lu Y, Weng L, Zhang L. Morphology and properties of soy protein isolate thermoplastics reinforced with chitin whiskers. Biomacromolecules  2004; 5(3): 1046-51.
 [http://dx.doi.org/10.1021/bm034516x] [PMID: 15132699]

[139]
Sriupayo J, Supaphol P, Blackwell J, Rujiravanit R. Preparation and characterization of α-chitin whisker-reinforced chitosan nanocomposite films with or without heat treatment. Carbohydr Polym  2005; 62(2): 130-6.
 [http://dx.doi.org/10.1016/j.carbpol.2005.07.013]

[140]
Koshy RR, Reghunadhan A, Mary SK, Pillai PS, Joseph S, Pothen LA. pH indicator films fabricated from soy protein isolate modified with chitin nanowhisker and Clitoria ternatea flower extract. Curr Res Food Sci  2022; 5: 743-51.
 [http://dx.doi.org/10.1016/j.crfs.2022.03.015] [PMID: 35497776]

[141]
Li X, Li G, Zeng Q, et al. The formation of soy protein fibrils-chitin nanowhisker complex coacervates: Relationship to mixed foam stability. Colloids Surf A Physicochem Eng Asp  2022; 652: 129783.
 [http://dx.doi.org/10.1016/j.colsurfa.2022.129783]

[142]
López-León T, Carvalho ELS, Seijo B, Ortega-Vinuesa JL, Bastos-González D. Physicochemical characterization of chitosan nanoparticles: electrokinetic and stability behavior. J Colloid Interface Sci  2005; 283(2): 344-51.
 [http://dx.doi.org/10.1016/j.jcis.2004.08.186] [PMID: 15721903]

[143]
Mitra A, Dey B. Chitosan microspheres in novel drug delivery systems. Indian J Pharm Sci  2011; 73(4): 355-66.
 [PMID: 22707817]

[144]
de Moura MR, Aouada FA, Avena-Bustillos RJ, McHugh TH, Krochta JM, Mattoso LHC. Improved barrier and mechanical properties of novel hydroxypropyl methylcellulose edible films with chitosan/tripolyphosphate nanoparticles. J Food Eng  2009; 92(4): 448-53.
 [http://dx.doi.org/10.1016/j.jfoodeng.2008.12.015]

[145]
Krishnamoorti R, Vaia R. Polymer nanocomposites: synthesis, characterization, and modeling. ACS Symposium Series. 
 [http://dx.doi.org/10.1021/bk-2002-0804.fw001]

[146]
Bahramian AR, Kokabi M. Numerical and experimental evaluations of the flammability and pyrolysis of a resolebased nanocomposite by cone calorimeter. Iranian J Polymer  2011; 20(5): 395-411.

[147]
Ray S, Quek SY, Easteal A, Chen XD. The potential use of polymer-clay nanocomposites in food packaging. Int J Food Eng  2006; 2(4)
 [http://dx.doi.org/10.2202/1556-3758.1149]

[148]
Bharadwaj RK, Mehrabi AR, Hamilton C, et al. Structure–property relationships in cross-linked polyester–clay nanocomposites. Polymer (Guildf)  2002; 43(13): 3699-705.
 [http://dx.doi.org/10.1016/S0032-3861(02)00187-8]

[149]
Kiliaris P, Papaspyrides CD. Polymer/layered silicate (clay) nanocomposites: An overview of flame retardancy. Prog Polym Sci  2010; 35(7): 902-58.
 [http://dx.doi.org/10.1016/j.progpolymsci.2010.03.001]

[150]
Weiss J, Takhistov P, McClements DJ. Functional materials in food nanotechnology. J Food Sci  2006; 71(9): R107-16.
 [http://dx.doi.org/10.1111/j.1750-3841.2006.00195.x]

[151]
Kellar JJ. Functional Fillers and Nanoscale Minerals: New Markets/New Horizons Society ffor Mining.  USA: Metallurgy, and Exploration, Inc 2006; p. 273.

[152]
Ludueña LN, Kenny JM, Vázquez A, Alvarez VA. Effect of clay organic modifier on the final performance of PCL/clay nanocomposites. Mater Sci Eng A  2011; 529: 215-23.
 [http://dx.doi.org/10.1016/j.msea.2011.09.020]

[153]
Mittal V. Polymer nanocomposite foams.  (1st ed.), CRC Press 2014.

[154]
Soni S, Salhotra A, Suar M. Handbook of Research on Diverse Applications of Nanotechnology in Biomedicine, Chemistry, and Engineering. IGI Global Publisher of Timely Knowledge 2014.
 [http://dx.doi.org/10.4018/978-1-4666-6363-3]

[155]
de Paiva LB, Morales AR, Valenzuela Díaz FR. Organoclays: Properties, preparation and applications. Appl Clay Sci  2008; 42(1-2): 8-24.
 [http://dx.doi.org/10.1016/j.clay.2008.02.006]

[156]
Yu Y-H, Lin CY, Yeh JM, Lin WH. Preparation and properties of poly(vinyl alcohol)–clay nanocomposite materials. Polymer (Guildf)  2003; 44(12): 3553-60.
 [http://dx.doi.org/10.1016/S0032-3861(03)00062-4]

[157]
Qureshi N, Lee S, Chaudhari R, et al. Hydrothermal generation of 3-dimensional WO3 nanocubes, nanobars and nanobricks, their antimicrobial and anticancer properties. J Nanosci Nanotechnol  2021; 21(10): 5337-43.
 [http://dx.doi.org/10.1166/jnn.2021.19450] [PMID: 33875127]

[158]
Bal S, Samal SS. Carbon nanotube reinforced polymer composites—A state of the art. Bull Mater Sci  2007; 30(4): 379-86.
 [http://dx.doi.org/10.1007/s12034-007-0061-2]

[159]
Ziaei-Rad S, Nouri N. Mechanical property evaluation of carbon nanotube sheets. Sci Iran  2010; 17(2): 90-101.

[160]
Lau AKT, Hui D. The revolutionary creation of new advanced materials—carbon nanotube composites. Compos, Part B Eng  2002; 33(4): 263-77.
 [http://dx.doi.org/10.1016/S1359-8368(02)00012-4]

[161]
Kim JY, Han SI, Hong S. Effect of modified carbon nanotube on the properties of aromatic polyester nanocomposites. Polymer (Guildf)  2008; 49(15): 3335-45.
 [http://dx.doi.org/10.1016/j.polymer.2008.05.024]

[162]
Mi Y, Zhang X, Zhou S, et al. Morphological and mechanical properties of bile salt modified multi-walled carbon nanotube/poly(vinyl alcohol) nanocomposites. Compos, Part A Appl Sci Manuf  2007; 38(9): 2041-6.
 [http://dx.doi.org/10.1016/j.compositesa.2007.04.014]

[163]
Nueraji M, Toktarbay Z, Ardakkyzy A, et al. Mechanically-robust electrospun nanocomposite fiber membranes for oil and water separation. Environ Res  2023; 220: 115212.
 [http://dx.doi.org/10.1016/j.envres.2023.115212] [PMID: 36623680]

[164]
Lan W, Zhang X, Xu M, et al. Carbon nanotube reinforced polyvinyl alcohol/biphasic calcium phosphate scaffold for bone tissue engineering. RSC Advances  2019; 9(67): 38998-9010.
 [http://dx.doi.org/10.1039/C9RA08569F] [PMID: 35540653]

[165]
Alruwail IBM, Saeed U, Ahmad I, Al-Turaif H, Aboalkhair H, Alsaiar IAO. Development of multiwalled carbon nanotube-reinforced biodegradable polylactic acid/polybutylene succinate blend membrane. Membranes (Basel)  2021; 11(10): 760.
 [http://dx.doi.org/10.3390/membranes11100760] [PMID: 34677526]

[166]
Chuayjuljit S, Luecha W. XSBR/NR rubber blends filled with polystyrene-encapsulated nanosilica prepared by in situ differential microemulsion polymerization. J Elastomers Plast  2011; 43(5): 407-27.
 [http://dx.doi.org/10.1177/0095244311405001]

[167]
Tang H, Xiong H, Tang S, Zou P. A starch-based biodegradable film modified by nano silicon dioxide. J Appl Polym Sci  2009; 113(1): 34-40.
 [http://dx.doi.org/10.1002/app.29855]

[168]
Yao K, Cai J, Liu M, et al. Structure and properties of starch/PVA/nano-SiO2 hybrid films. Carbohydr Polym  2011; 86(4): 1784-9.
 [http://dx.doi.org/10.1016/j.carbpol.2011.07.008]

[169]
Hajizadeh H, Peighambardoust SJ, Peighambardoust SH, Peressini D. Physical, mechanical, and antibacterial characteristics of bio‐nanocomposite films loaded with Agmodified SiO 2 and TiO 2 nanoparticles. J Food Sci  2020; 85(4): 1193-202.
 [http://dx.doi.org/10.1111/1750-3841.15079] [PMID: 32144762]

[170]
Kurbanova A, Myrzakhmetova N, Akimbayeva N, et al. Superhydrophobic SiO2/Trimethylchlorosilane coating for self-cleaning application of construction materials. Coatings  2022; 12(10): 1422.
 [http://dx.doi.org/10.3390/coatings12101422]

[171]
Pawar J, Bipinraj NK, Singh EA, Nikam N. Determination and partial characterization of antimicrobial material of Pseudomonas aeruginosa isolated from milk. J Food Sci Technol  2012; 1(2): 16-23.

[172]
Hamouda T, Hayes MM, Cao Z, et al. A novel surfactant nanoemulsion with broad-spectrum sporicidal activity against Bacillus species. J Infect Dis  1999; 180(6): 1939-49.
 [http://dx.doi.org/10.1086/315124] [PMID: 10558951]

[173]
Kampmann Y, De Clerck E, Kohn S, Patchala DK, Langerock R, Kreyenschmidt J. Study on the antimicrobial effect of silver-containing inner liners in refrigerators. J Appl Microbiol  2008; 104(6): 1808-14.
 [http://dx.doi.org/10.1111/j.1365-2672.2008.03727.x] [PMID: 18341560]

[174]
Berrang ME, Frank JF, Meinersmann RJ. Listeria monocytogenes biofilm formation on silver ion impregnated cutting boards. Food Prot Trends  2010; 30(3): 168-71.

[175]
von Goetz N, Fabricius L, Glaus R, Weitbrecht V, Günther D, Hungerbühler K. Migration of silver from commercial plastic food containers and implications for consumer exposure assessment. Food Addit Contam Part A Chem Anal Control Expo Risk Assess  2013; 30(3): 612-20.
 [http://dx.doi.org/10.1080/19440049.2012.762693] [PMID: 23406534]

[176]
Mane PC, Sayyed SAR, Kadam DD, et al. Terrestrial snailmucus mediated green synthesis of silver nanoparticles and in vitro investigations on their antimicrobial and anticancer activities. Sci Rep  2021; 11(1): 13068.
 [http://dx.doi.org/10.1038/s41598-021-92478-4] [PMID: 34158586]

[177]
Burygin GL, Khlebtsov BN, Shantrokha AN, Dykman LA, Bogatyrev VA, Khlebtsov NG. On the enhanced antibacterial activity of antibiotics mixed with gold nanoparticles. Nanoscale Res Lett  2009; 4(8): 794-801.
 [http://dx.doi.org/10.1007/s11671-009-9316-8] [PMID: 20596384]

[178]
Wang X, Liu X, Chen J, Han H, Yuan Z. Evaluation and mechanism of antifungal effects of carbon nanomaterials in controlling plant fungal pathogen. Carbon  2014; 68: 798-806.
 [http://dx.doi.org/10.1016/j.carbon.2013.11.072]

[179]
Pachaiappan R, Rajendran S, Show PL, Manavalan K, Naushad M. Metal/metal oxide nanocomposites for bactericidal effect: A review. Chemosphere  2021; 272: 128607.
 [http://dx.doi.org/10.1016/j.chemosphere.2020.128607] [PMID: 33097236]

[180]
Phatak RS, Hendre A. Green synthesis of silver nanorods using aqueous extract of Kalanchoe pinnata fresh leaves and its synergistic effect with ciprofloxacin and antibiofilm activities. Int J Pharm Pharm Sci  2016; 8(1): 168-74.

[181]
Wang K, Li M, Li H, et al. Synthesis and characterization of CdSe/CdS/N-acetyl-l-cysteine/quercetin nanocomposites and their antibacterial performance. Journal of the Korean Chemical Society  2015; 59(2): 136-41.
 [http://dx.doi.org/10.5012/jkcs.2015.59.2.136]

[182]
Xing K, Chen XG, Kong M, Liu CS, Cha DS, Park HJ. Effect of oleoyl-chitosan nanoparticles as a novel antibacterial dispersion system on viability, membrane permeability and cell morphology of Escherichia coli and Staphylococcus aureus. Carbohydr Polym  2009; 76(1): 17-22.
 [http://dx.doi.org/10.1016/j.carbpol.2008.09.016]

[183]
Maleki Dizaj S, Mennati A, Jafari S, Khezri K, Adibkia K. Antimicrobial activity of carbon-based nanoparticles. Adv Pharm Bull  2015; 5(1): 19-23.
 [PMID: 25789215]

[184]
Khan A, Shabir D, Ahmad P, Khandaker MU, Faruque MRI, Din IU. Biosynthesis and antibacterial activity of MgO-NPs produced from Camellia-sinensis leaves extract. Mater Res Express  2021; 8(1): 015402.
 [http://dx.doi.org/10.1088/2053-1591/abd421]

[185]
Qamar H, Rehman S, Chauhan DK, Tiwari AK, Upmanyu V. Green synthesis, characterization and antimicrobial activity of copper oxide nanomaterial derived from Momordica charantia. Int J Nanomedicine  2020; 15: 2541-53.
 [http://dx.doi.org/10.2147/IJN.S240232] [PMID: 32368039]

[186]
Moudgil A, Varma S, Shinde MD, et al. One-pot concurrent biosynthesis of biphasic CuxO (cuprous and cupric oxide) nanoparticles using leaf extract of Eichhornia crassipes and investigation of their potent healthcare applications. Emerg Mater  2022; 5(2): 323-33.
 [http://dx.doi.org/10.1007/s42247-022-00347-1]

[187]
Pisal S, Pawar J, Kale SC, et al. Antibacterial effects of ZnO NPs synthesized by solvothermal method against Pseudomonas sp. extracted from saliva ejector tubing. Int J Curr Res Rev  2021; 13(3): 60-3.
 [http://dx.doi.org/10.31782/IJCRR.2021.13321]

[188]
Kubacka A, Diez MS, Rojo D, et al. Understanding the antimicrobial mechanism of TiO2-based nanocomposite films in a pathogenic bacterium. Sci Rep  2014; 4(1): 4134.
 [http://dx.doi.org/10.1038/srep04134] [PMID: 24549289]

[189]
Galgano F, Condelli N, Favati F, di Bianco V, Perretti G, Caruso MC. Biodegradable packaging and edible coating for fresh-cut fruits and vegetables. Ital J Food Sci  2015; 27(1): 1-20.

[190]
Armentano I, Arciola CR, Fortunati E, et al. The interaction of bacteria with engineered nanostructured polymeric materials: A review. ScientificWorldJ  2014; 2014: 1-18.
 [http://dx.doi.org/10.1155/2014/410423] [PMID: 25025086]

[191]
Kumar R, Howdle S, Münstedt H. Polyamide/silver antimicrobials: Effect of filler types on the silver ion release. J Biomed Mater Res B Appl Biomater  2005; 75B(2): 311-9.
 [http://dx.doi.org/10.1002/jbm.b.30306] [PMID: 16001422]

[192]
Radheshkumar C, Münstedt H. Antimicrobial polymers from polypropylene/silver composites—Ag+ release measured by anode stripping voltammetry. React Funct Polym  2006; 66(7): 780-8.
 [http://dx.doi.org/10.1016/j.reactfunctpolym.2005.11.005]

[193]
Damm C, Münstedt H, Rösch A. The antimicrobial efficacy of polyamide 6/silver-nano- and microcomposites. Mater Chem Phys  2008; 108(1): 61-6.
 [http://dx.doi.org/10.1016/j.matchemphys.2007.09.002]

[194]
He X, Hwang HM. Nanotechnology in food science: Functionality, applicability, and safety assessment. Yao Wu Shi Pin Fen Xi  2016; 24(4): 671-81.
 [PMID: 28911604]

[195]
Zandi K, Weisany W, Ahmadi H, Bazargan I, Naseri L. Effect of nanocomposite-based packaging on postharvest quality of strawberry during storage. Bull Environ Pharmacol Life Sci  2013; 2(5): 28-36.

[196]
Pathakoti K, Morrow S, Han C, et al. Photoinactivation of Escherichia coli by sulfur-doped and nitrogen-fluorinecodoped TiO2 nanoparticles under solar simulated light and visible light irradiation. Environ Sci Technol  2013; 47(17): 9988-96.
 [http://dx.doi.org/10.1021/es401010g] [PMID: 23906338]

[197]
He X, Aker WG, Hwang HM. An in vivo study on the photo-
enhanced toxicities of S-doped TiO 2 nanoparticles to
zebrafish embryos ( Danio rerio ) in terms of malformation,
mortality, rheotaxis dysfunction, and DNA damage. Nanotoxicology  2014; 8(sup1)(Suppl. 1): 185-95.
 [http://dx.doi.org/10.3109/17435390.2013.874050] [PMID: 24766231]

[198]
Mejías Carpio IE, Santos CM, Wei X, Rodrigues DF. Toxicity of a polymer–graphene oxide composite against bacterial planktonic cells, biofilms, and mammalian cells. Nanoscale  2012; 4(15): 4746-56.
 [http://dx.doi.org/10.1039/c2nr30774j] [PMID: 22751735]

[199]
Zapata PA, Tamayo L, Páez M, Cerda E, Azócar I, Rabagliati FM. Nanocomposites based on polyethylene and nanosilver particles produced by metallocenic “in situ” polymerization: synthesis, characterization, and antimicrobial behavior. Eur Polym J  2011; 47(8): 1541-9.
 [http://dx.doi.org/10.1016/j.eurpolymj.2011.05.008]

[200]
Deng J, Ding QM, Li W, et al. Preparation of nano-silvercontaining polyethylene composite film and Ag ion migration into food-simulants. J Nanosci Nanotechnol  2020; 20(3): 1613-21.
 [http://dx.doi.org/10.1166/jnn.2020.17346] [PMID: 31492323]

[201]
Yadav SK, Mahapatra SS, Cho JW. Synthesis of mechanically robust antimicrobial nanocomposites by click coupling of hyperbranched polyurethane and carbon nanotubes. Polymer (Guildf)  2012; 53(10): 2023-31.
 [http://dx.doi.org/10.1016/j.polymer.2012.03.010]

[202]
Mukherje M. In vitro antimicrobial activity of polyacrylamide doped magnetic iron oxide nanoparticles. Int J Mater Mech Manufactur  2014; 2(1): 64-6.
 [http://dx.doi.org/10.7763/IJMMM.2014.V2.101]

[203]
Sambhy V, MacBride MM, Peterson BR, Sen A. Silver bromide nanoparticle/polymer composites: Dual action tunable antimicrobial materials. J Am Chem Soc  2006; 128(30): 9798-808.
 [http://dx.doi.org/10.1021/ja061442z] [PMID: 16866536]

[204]
Agnihotri S, Mukherji S, Mukherji S. Antimicrobial chitosan–PVA hydrogel as a nanoreactor and immobilizing matrix for silver nanoparticles. Appl Nanosci  2012; 2(3): 179-88.
 [http://dx.doi.org/10.1007/s13204-012-0080-1]

[205]
Vimala K, Yallapu MM, Varaprasad K, et al. Fabrication of curcumin encapsulated chitosan-PVA silver nanocomposite films for improved antimicrobial activity. J Biomater Nanobiotechnol  2011; 2(1): 55-64.
 [http://dx.doi.org/10.4236/jbnb.2011.21008]

[206]
Jin T, Sun D, Su JY, Zhang H, Sue HJ. Antimicrobial efficacy of zinc oxide quantum dots against Listeria monocytogenes, Salmonella enteritidis, and Escherichia coli O157:H7. J Food Sci  2009; 74(1): M46-52.
 [http://dx.doi.org/10.1111/j.1750-3841.2008.01013.x] [PMID: 19200107]

[207]
Hebeish AA, Abdelhady MM, Youssef AM. TiO2 nanowire and TiO2 nanowire doped Ag-PVP nanocomposite for antimicrobial and self-cleaning cotton textile. Carbohydr Polym  2013; 91(2): 549-59.
 [http://dx.doi.org/10.1016/j.carbpol.2012.08.068] [PMID: 23121944]

[208]
Sotiriou GA, Pratsinis SE. Engineering nanosilver as an antibacterial, biosensor and bioimaging material. Curr Opin Chem Eng  2011; 1(1): 3-10.
 [http://dx.doi.org/10.1016/j.coche.2011.07.001] [PMID: 23730551]

[209]
Marambio-Jones C, Hoek EMV. A review of the antibacterial effects of silver nanomaterials and potential implications for human health and the environment. J Nanopart Res  2010; 12(5): 1531-51.
 [http://dx.doi.org/10.1007/s11051-010-9900-y]

[210]
Mane PC, Chaudhari RD, Shinde MD, et al. Designing ecofriendly bionanocomposite assembly with improved antimicrobial and potent on-site Zika virus vector larvicidal activities with its mode of action. Sci Rep  2017; 7(1): 15531.
 [http://dx.doi.org/10.1038/s41598-017-15537-9] [PMID: 29138496]

[211]
Cai X, Lin M, Tan S, et al. The use of polyethyleneiminemodified reduced graphene oxide as a substrate for silver nanoparticles to produce a material with lower cytotoxicity and long-term antibacterial activity. Carbon  2012; 50(10): 3407-15.
 [http://dx.doi.org/10.1016/j.carbon.2012.02.002]

[212]
Mohammed Fayaz A, Balaji K, Girilal M, Kalaichelvan PT, Venkatesan R. Mycobased synthesis of silver nanoparticles and their incorporation into sodium alginate films for vegetable and fruit preservation. J Agric Food Chem  2009; 57(14): 6246-52.
 [http://dx.doi.org/10.1021/jf900337h] [PMID: 19552418]

[213]
Akhavan O, Ghaderi E. Cu and CuO nanoparticles immobilized by silica thin films as antibacterial materials and photocatalysts. Surf Coat Tech  2010; 205(1): 219-23.
 [http://dx.doi.org/10.1016/j.surfcoat.2010.06.036]

[214]
Esteban-Tejeda L, Malpartida F, Esteban-Cubillo A, Pecharromán C, Moya JS. The antibacterial and antifungal activity of a soda-lime glass containing silver nanoparticles. Nanotechnology  2009; 20(8): 085103.
 [http://dx.doi.org/10.1088/0957-4484/20/8/085103] [PMID: 19417439]

[215]
Zhang W, Chen Y, Yu S, Chen S, Yin Y. Preparation and antibacterial behavior of Fe3+-doped nanostructured TiO2 thin films. Thin Solid Films  2008; 516(15): 4690-4.
 [http://dx.doi.org/10.1016/j.tsf.2007.08.053]

[216]
Sodagar A, Bahador A, Khalil S, Saffar Shahroudi A, Zaman Kassaee M. The effect of TiO2 and SiO2 nanoparticles on flexural strength of poly (methyl methacrylate) acrylic resins. J Prosthodont Res  2013; 57(1): 15-9.
 [http://dx.doi.org/10.1016/j.jpor.2012.05.001] [PMID: 23200530]

[217]
Barud HS, Regiani T, Marques RFC, Lustri WR, Messaddeq Y, Ribeiro SJL. Antimicrobial bacterial cellulosesilver nanoparticles composite membranes. J Nanomater  2011; 2011: 1-8.
 [http://dx.doi.org/10.1155/2011/721631]

[218]
Maneerung T, Tokura S, Rujiravanit R. Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing. Carbohydr Polym  2008; 72(1): 43-51.
 [http://dx.doi.org/10.1016/j.carbpol.2007.07.025]

[219]
Tripathi S, Mehrotra GK, Dutta PK. Chitosan–silver oxide nanocomposite film: Preparation and antimicrobial activity. Bull Mater Sci  2011; 34(1): 29-35.
 [http://dx.doi.org/10.1007/s12034-011-0032-5]

[220]
Byun Y, Darby D, Cooksey K, Dawson P, Whiteside S. Development of oxygen scavenging system containing a natural free radical scavenger and a transition metal. Food Chem  2011; 124(2): 615-9.
 [http://dx.doi.org/10.1016/j.foodchem.2010.06.084] [PMID: 23140708]

[221]
Busolo MA, Lagaron JM. Oxygen scavenging polyolefin nanocomposite films containing an iron modified kaolinite of interest in active food packaging applications. Innov Food Sci Emerg Technol  2012; 16: 211-7.
 [http://dx.doi.org/10.1016/j.ifset.2012.06.008]

[222]
Gibis D, Rieblinger K. Oxygen scavenging films for food application. Procedia Food Sci  2011; 1: 229-34.
 [http://dx.doi.org/10.1016/j.profoo.2011.09.036]

[223]
Xiao-e L, Green ANM, Haque SA, Mills A, Durrant JR. Light-driven oxygen scavenging by titania/polymer nanocomposite films. J Photochem Photobiol Chem  2004; 162(2-3): 253-9.
 [http://dx.doi.org/10.1016/j.nainr.2003.08.010]

[224]
Franssen MCR, Steunenberg P, Scott EL, Zuilhof H, Sanders JPM. Immobilised enzymes in biorenewables production. Chem Soc Rev  2013; 42(15): 6491-533.
 [http://dx.doi.org/10.1039/c3cs00004d] [PMID: 23519171]

[225]
Sahin S, Ozmen I, Kir E. Purification, immobilization, and characterization of protease from local Bacillus subtilis M-11. Asia-Pac J Chem Eng  2015; 10(2): 241-7.
 [http://dx.doi.org/10.1002/apj.1868]

[226]
Appendini P, Hotchkiss JH. Immobilization of lysozyme on food contact polymers as potential antimicrobial films. Packag Technol Sci  1997; 10(5): 271-9.
 [http://dx.doi.org/10.1002/(SICI)1099-1522(199709/10)10:5<271:AID-PTS412>3.0.CO;2-R]

[227]
Fernández A, Cava D, Ocio MJ, Lagarón JM. Perspectives for biocatalysts in food packaging. Trends Food Sci Technol  2008; 19(4): 198-206.
 [http://dx.doi.org/10.1016/j.tifs.2007.12.004]

[228]
Brena B, González-Pombo P, Batista-Viera F. Immobilization of enzymes: A literature survey. Methods Mol Biol  2013; 1051: 15-31.
 [http://dx.doi.org/10.1007/978-1-62703-550-7_2] [PMID: 23934795]

[229]
Praharaj S, Nath S, Ghosh SK, Kundu S, Pal T. Immobilization and recovery of au nanoparticles from anion exchange resin: resin-bound nanoparticle matrix as a catalyst for the reduction of 4-nitrophenol. Langmuir  2004; 20(23): 9889-92.
 [http://dx.doi.org/10.1021/la0486281] [PMID: 15518467]

[230]
Fang X, Ma H, Xiao S, et al. Facile immobilization of gold nanoparticles into electrospun polyethyleneimine/polyvinyl alcohol nanofibers for catalytic applications. J Mater Chem  2011; 21(12): 4493-501.
 [http://dx.doi.org/10.1039/c0jm03987j]

[231]
Hu A, Fu ZH. Nanotechnology and its application in packaging and packaging machinery. Pack Eng  2003; 24: 22-4.

[232]
Baltic M, Boskovic M, Ivanovic J, et al. Nanotechnology and its potential applications in meat industry. Tehnol Mesa  2013; 54(2): 168-75.
 [http://dx.doi.org/10.5937/tehmesa1302168B]

[233]
Bouwmeester H, Dekkers S, Noordam MY, et al. Review of health safety aspects of nanotechnologies in food production. Regul Toxicol Pharmacol  2009; 53(1): 52-62.
 [http://dx.doi.org/10.1016/j.yrtph.2008.10.008] [PMID: 19027049]

[234]
Inbaraj BS, Chen BH. Nanomaterial-based sensors for detection of foodborne bacterial pathogens and toxins as well as pork adulteration in meat products. Yao Wu Shi Pin Fen Xi  2016; 24(1): 15-28.
 [PMID: 28911398]

[235]
Bülbül G, Hayat A, Andreescu S. Portable nanoparticlebased sensors for food safety assessment. Sensors (Basel)  2015; 15(12): 30736-58.
 [http://dx.doi.org/10.3390/s151229826] [PMID: 26690169]

[236]
Mills A, Hazafy D. Nanocrystalline SnO2-based, UVBactivated, colourimetric oxygen indicator. Sens Actuators B Chem  2009; 136(2): 344-9.
 [http://dx.doi.org/10.1016/j.snb.2008.12.048]

[237]
Liao F, Chen C, Subramanian V. Organic TFTs as gas sensors for electronic nose applications. Sens Actuators B Chem  2005; 107(2): 849-55.
 [http://dx.doi.org/10.1016/j.snb.2004.12.026]

[238]
Bowles M, Lu J. Removing the blinders: A literature review on the potential of nanoscale technologies for the management of supply chains. Technol Forecast Soc Change  2014; 82: 190-8.
 [http://dx.doi.org/10.1016/j.techfore.2013.10.017]

[239]
Šetkus A. Heterogeneous reaction rate based description of the response kinetics in metal oxide gas sensors. Sens Actuators B Chem  2002; 87(2): 346-57.
 [http://dx.doi.org/10.1016/S0925-4005(02)00269-1]

[240]
Adhyapak PV, Bharatula LD, Rathi A, Jang S, Kim T, Amalnerkar D. Influence of erbium doping on hydrothermally synthesized ZnO nanostructures and their enhanced gas sensing properties. Curr Smart Mater  2017; 2(2): 146-52.
 [http://dx.doi.org/10.2174/2405465802666170517150820]

[241]
de Azeredo HMC, Mattoso LHC, McHugh TH. Nanocomposites in food packaging–a review. 2011.
 [http://dx.doi.org/10.5772/14437]

[242]
Sanvicens N, Pastells C, Pascual N, Marco MP. Nanoparticle-based biosensors for detection of pathogenic bacteria. Trends Analyt Chem  2009; 28(11): 1243-52.
 [http://dx.doi.org/10.1016/j.trac.2009.08.002]

[243]
Tallury P, Malhotra A, Byrne LM, Santra S. Nanobioimaging and sensing of infectious diseases. Adv Drug Deliv Rev  2010; 62(4-5): 424-37.
 [http://dx.doi.org/10.1016/j.addr.2009.11.014] [PMID: 19931579]

[244]
Arshak K, Adley C, Moore E, Cunniffe C, Campion M, Harris J. Characterisation of polymer nanocomposite sensors for quantification of bacterial cultures. Sens Actuators B Chem  2007; 126(1): 226-31.
 [http://dx.doi.org/10.1016/j.snb.2006.12.006]

[245]
El-Boubbou K, Gruden C, Huang X. Magnetic glyconanoparticles: a unique tool for rapid pathogen detection, decontamination, and strain differentiation. J Am Chem Soc  2007; 129(44): 13392-3.
 [http://dx.doi.org/10.1021/ja076086e] [PMID: 17929928]

[246]
Cho Y, Kang S. Emerging Technologies for Food Quality and Food Safety Evaluation.  (1st ed.), CRC Press 2011.
 [http://dx.doi.org/10.1201/b10710]

[247]
Xu C, Akakuru OU, Zheng J, Wu A. Applications of iron oxide-based magnetic nanoparticles in the diagnosis and treatment of bacterial infections. Front Bioeng Biotechnol  2019; 7: 141.
 [http://dx.doi.org/10.3389/fbioe.2019.00141] [PMID: 31275930]

[248]
Zia R, Iftikhar M, Rafiq A, et al. 16 - Nanosensors for microbial detection in soil.  Nanosens Smart Agri 2022; pp. 367-400.
 [http://dx.doi.org/10.1016/B978-0-12-824554-5.00003-3]

[249]
Hajipour MJ, Saei AA, Walker ED, et al. Nanotechnology for targeted detection and removal of bacteria: Opportunities and challenges. Adv Sci (Weinh)  2021; 8(21): 2100556.
 [http://dx.doi.org/10.1002/advs.202100556] [PMID: 34558234]

[250]
Bodor R, Žúborová M, Ölvecká E, et al. Isotachophoresis and isotachophoresis-zone electrophoresis of food additives on a chip with column-coupling separation channels. J Sep Sci  2001; 24(9): 802-9.
 [http://dx.doi.org/10.1002/1615-9314(20010901)24:9<802:AID-JSSC802>3.0.CO;2-1]

[251]
Ai K, Liu Y, Lu L. Hydrogen-bonding recognition-induced color change of gold nanoparticles for visual detection of melamine in raw milk and infant formula. J Am Chem Soc  2009; 131(27): 9496-7.
 [http://dx.doi.org/10.1021/ja9037017] [PMID: 19537721]

[252]
Gupta R, Kennel E, Kim K. Polymer Nanocomposites Handbook.  (1st ed.), CRC Press 2009.
 [http://dx.doi.org/10.1201/9781420009804]

[253]
Liang XJ, Chen C, Zhao Y, Jia L, Wang P. Biopharmaceutics and therapeutic potential of engineered nanomaterials. Curr Drug Metab  2008; 9(8): 697-709.
 [http://dx.doi.org/10.2174/138920008786049230] [PMID: 18855608]

[254]
Neethirajan S, Freund M, Jayas D, Shafai C, Thomson D, White N. Development of carbon dioxide (CO2) sensor using
polymer nanoparticles for grain quality monitoring.
CSBE100368-Presented at Symposium on Nanotechnologies
Applied to Biosystems Engineering and the Environment.
XVIIth World Congress of the International Commission
of Agricultural and Biosystems Engineering
(CIGR). Canadian Society for Bioengineering
(CSBE/SCGAB) Québec City, Canada. June 13-17, 2010.

[255]
Turner C, Rudnitskaya A, Legin A. Monitoring batch fermentations with an electronic tongue. J Biotechnol  2003; 103(1): 87-91.
 [http://dx.doi.org/10.1016/S0168-1656(03)00066-X] [PMID: 12770507]

[256]
Bahrami A. Technology review-Nanocomposites. 2007. Available from: https://compositesuk.co.uk/wpcontent/uploads/2021/12/Nanocomposites.pdf

[257]
Leaversuch R. Nanocomposites. 2001. Available from: www.plasticstechnology.com, https://zeus.plmsc.psu.edu/~manias/news/plastics_tech_oct_2001.pdf

[258]
Rai M, Ribeiro C, Mattoso L, Duran N. Nanotechnologies in Food and Agriculture. Switzerland: Springer International Publishing 2015.
 [http://dx.doi.org/10.1007/978-3-319-14024-7]

[259]
Wani AA, Singh P, Pant A, Langowski HC. Packaging methods for minimally processed foodsMinimally Processed Foods Food Engineering Series. Cham: Springer 2015.
 [http://dx.doi.org/10.1007/978-3-319-10677-9_3]

[260]
Brody A, Strupinsky E, Kline L. Active packaging for food applications.  (1st ed.), Taylor and Francis Group 2001.

[261]
Kim JY, Han SI, Kim DK, Kim SH. Mechanical reinforcement and crystallization behavior of poly(ethylene 2,6-naphthalate) nanocomposites induced by modified carbon nanotube. Compos, Part A Appl Sci Manuf  2009; 40(1): 45-53.
 [http://dx.doi.org/10.1016/j.compositesa.2008.10.002]

[262]
Wakabayashi K, Pierre C, Dikin DA, et al. Polymergraphite nanocomposites: Effective dispersion and major property enhancement via solid-state shear pulverization. Macromolecules  2008; 41(6): 1905-8.
 [http://dx.doi.org/10.1021/ma071687b]

[263]
Borriello C, De Maria A, Jovic N, Montone A, Schwarz M, Antisari MV. Mechanochemical exfoliation of graphite and its polyvinyl alcohol nanocomposites with enhanced barrier properties. Mater Manuf Process  2009; 24(10-11): 1053-7.
 [http://dx.doi.org/10.1080/10426910903022346]

[264]
Silvestre C, Duraccio D, Cimmino S. Food packaging based on polymer nanomaterials. Prog Polym Sci  2011; 36(12): 1766-82.
 [http://dx.doi.org/10.1016/j.progpolymsci.2011.02.003]
Rights & Permissions Print Cite
Journal Information
For Authors
For Editors
For Reviewers
Explore Articles
Open Access
Open Access Articles
For Visitors
DOI https://dx.doi.org/10.2174/2666145417666230712122748	Print ISSN 2666-1454
Publisher Name Bentham Science Publisher	Online ISSN 2666-1462
Current Materials Science

Contemporary Trends in Active and Intelligent Polymer Nanocomposite based Food Packaging Systems for Food Safety and Sustainability in the Modern Aeon

Abstract Play Pause

Graphical Abstract

Related Journals

Related Books

Abstract
