[1]
Gunawan S., Vali S.R., and Ju Y.H., "(2006) Purification and Identification of Rice Bran Oil Fatty Acid Steryl Esters and Wax Esters", J. Am. Oil Chem. Soc., vol. 83, pp. 449-456, .
[2]
Gunawan S., Kasim N.S., and Ju Y.H., "(2008) Separation and purification of squalene from soybean oil deodorizer distillate", Separ. Purif. Tech., vol. 60, pp. 128-135, .
[3]
Gunawan S., Ismadji S., and Ju Y.H., "(2008) Design and operation of a modified silica gel column chromatography", Journal Chinese Institute of Chemical Engineer, vol. 39, pp. 625-633, .
[4]
Gunawan S., Fabian C., and Ju Y.H., "(2008) Isolation and purification of fatty acid steryl esters from soybean oil deodorizer distillate", Ind. Eng. Chem. Res., vol. 47, pp. 7013-7018, .
[5]
Fabian C., Gunawan S., Kasim N.S., Chiang C.L., and Ju Y.H., "(2009) Separation of non polar lipid from soybean oil deodorizer distillate by stirred batch-wise silica gel adsorption-desorption", Sep. Sci. Technol., vol. 44, pp. 1-17, .
[6]
Kasim N.S., Tsai T.H., Gunawan S., and Ju Y.H., "(2009) Biodiesel production from rice bran oil and supercritical methanol", Bioresour. Technol., vol. 100, pp. 2007-2011, .
[7]
Kasim N.S., Gunawan S., and Ju Y.H., "(2009) Isolation and identification of steroidal hydrocarbon in soybean oil deodorizer distillate", Food Chem., vol. 117, pp. 15-19, .
[8]
Pei-Jing Shiu, Setiyo Gunawan, Wen-Hao Hsieh, Novy S. Kasim, and Yi-Hsu Ju, "Biodiesel production from rice bran by a two-step in-situ process", Bioresour. Technol., vol. 101, pp. 984-989, .
[9]
Gunawan S., Melwita E., and Ju Y.H., "(2010) Analysis of trans-cis fatty acids in fatty acid steryl esters isolated from Soybean oil deodorizer distillate", Food Chem., vol. 121, pp. 752-757, .
[10]
Kasim N.S., Gunawan S., and Ju Y.H., "(2010) A Simple Two-Step Method for Isolating Tocopherols and Free Phytosterols from Soybean Oil Deodorizer Distillate", Sep. Sci. Technol., vol. 45, pp. 2537-2546, .
[11]
Gunawan S., "Syahrizal Maulana, Khairiel Anwar, and Tri Widjaja (2011) Rice Bran, a Potensial Source of the Biodiesel Production in Indonesia", Ind. Crops Prod., vol. 33, pp. 624-628, .
[12]
Ju Y.H., Huynh L.H., Gunawan S., Chern Y.T., and Kasim N.S., "(2012) Irresolvable Complex Mixture of Hydrocarbons in Soybean Oil Deodorizer Distillate with High Purity and Recovery", J. Sep. Sci., vol. 35, pp. 327-333, .
[13]
"Gunawan, S., Raden Darmawan, Miranti Nanda, Akhmad D. Setiawan, and Hamzah Fansuri (2013) Proximate composition of Xylocarpus moluccensis seeds and their oils", Ind. Crops Prod., vol. 41, pp. 107-112, 2013.
[14]
"Hakun W Wasista, K Kuswandi, Arief Widjaja, Yi-Hsu Ju (2014) The utilization of Xylocarpus moluccensis seed oil as biodiesel feedstock in Indonesia", Ind. Crops Prod., vol. 52, pp. 286-291, 2014.
[15]
Go A.W., "Sutanto, S.,Tran-Nguyen, P.L.,Ismadji, S., Gunawan, S.,Ju. Yi-Hsu Ju (2014) Biodiesel production under subcritical solvent condition using
subcritical water treated whole Jatropha curcas seed kernels and possible use of hydrolysates to grow Yarrowia lipolytica",
[16]
Gunawan S., Widjaja T., Zullaikah S., Ernawati L., Istianah N., Aparamarta H.W., and Prasetyoko D., "(2015) Effect of fermenting cassava with Lactobacillus plantarum, Saccharomyces cereviseae, and Rhizopus oryzae on the chemical composition of their flour", Int. Food Res. J., vol. 22, pp. 1280-1287, .
[17]
Aparamarta H.W., Saputra T., Claratika A., Ju Y-H., and Gunawan S., "(2016) Separation and Purification of Triacylglycerols from Nyamplung (Calophyllum inophyllum) Oil by Batchwise Solvent Extraction", Ind. Eng. Chem. Res., vol. 55, pp. 3113-3119, .
[18]
"David Febrilliant Susanto, Hakun Wirawasista Aparamarta, Arief Widjaja, Setiyo Gunawan (2017) Identification of phytochemical compounds in Calophyllum inophyllum leaves", Asian Pac. J. Trop. Biomed., vol. 9, pp. 773-781, .
[19]
Istianah N., Ernawati L., Anal A.K., and Gunawan S., "2018. Application of modified sorghum flour for improving bread properties and nutritional values", Int. Food Res. J., vol. 25, pp. 166-173, .
Related Books
Mechanical Engineering Technologies and Applications
Mechanical Engineering Technologies and Applications
Facets of a Smart City: Computational and Experimental Techniques for Sustainable Urban Development
Soft Robotics
Advances in Manufacturing Technologies and Production Engineering
Advances in Additive Manufacturing Processes
Lean Management Solutions for Contemporary Manufacturing Operations
Mechanical Engineering Technologies and Applications
Global Emerging Innovation Summit (GEIS-2021)
Article Metrics
12
2