Login Register Cart 0
Generic placeholder image

Combinatorial Chemistry & High Throughput Screening

Editor-in-Chief

ISSN (Print): 1386-2073
ISSN (Online): 1875-5402

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Physico-chemical Characterization of Hydrochloric Acid-treated Kaolin Clay: An Industry Approach as a Potential Catalyst

Author(s): Awinash Kumar* and Pradip Lingfa

Volume 23, Issue 3, 2020

Page: [205 - 213] Pages: 9

DOI: 10.2174/1386207323666200219123459

Price: $65

Abstract

Aims and Objective: This study explains the FT-IR, XRD, XRF, SEM/EDX, TGA, and DSC/DTA characterization of commercially available kaolin clay. The objective of this paper is to explore the prominent utilization of kandites clay and useful chemical aspects for the modification of kaolin clay minerals.

Materials and Methods: The untreated kaolin sample has been procured in this experimental work from AksharChem, Gujrat, India. The kaolin clay was treated with 4M hydrochloric acid. FT-IR, XRD, XRF, SEM/EDX, TGA, and DSC/DTA characterization methods have been used.

Results: Loss on ignition was found at 10.89%. The fingerprint region of the acid-treated sample has broad and more bending vibrations than untreated samples. The high weight percentage of Ti and CaCO3 were spotted in the scanning electron micrograph by both atomic % and weight %. The FT-IR revealed the functional group of Al-O, A1-OH, and Si-O.

Conclusion: The morphology indicates that the presences of large particles are in the form of agglomerates. It was found that impurity like scandium vanished and manganese traced by the same atomic % 0.01 of zinc which had no presence after acid treatment. Thermogravimetric analysis indicates the sharp increments in heat flow in-between temperatures 0°C to 200°C and consequently increments in between 500°C to 550°C, a suitable range for the pyrolysis. Low amount of alumina and high amount of silica has been found out. TGA and DTA analysis satisfy the waste plastic valorization temperature ranges.

Keywords: Acid-activation, catalyst, kaolin clay, morphology, physico-chemical characteristics, spectroscopy.

« Previous Next »
[1]
Lussier, R.J. A novel clay-based catalytic material-preparation and properties. J. Catal., 1991, 129, 225-237.
[http://dx.doi.org/10.1016/0021-9517(91)90026-Z]
[2]
Panda, A.K.; Mishra, B.G.; Mishra, D.K.; Singh, R.K. Effect of sulphuric acid treatment on the physic-chemical characteristics of kaolin clay. Colloids Surf. A Physicochem. Eng. Asp., 2010, 363, 98-104.
[http://dx.doi.org/10.1016/j.colsurfa.2010.04.022]
[3]
Kumar, A.; Lingfa, P. An exploration of waste plastic oil and different hydrocarbon fuels derived from plastic wastes.Emerging Renewable Energy Technologies; Bora, P., Ed.; India, 2019, Vol. 1, pp. 1-13.
[4]
Kumar, A.; Dash, S.K.; Ahamed, M.S.; Lingfa, P. Study on conversion techniques of alternative fuels from waste plastics. In: Energy Recovery Processes from Wastes; Gosh, S., Ed.; Springer: Singapore, 2020; pp. 213-224.
[http://dx.doi.org/10.1007/978-981-32-9228-4_18]
[5]
Okada, K. Preparation of porous silica from mechanically activated kaolinite. J. Porous Mater., 2001, (8), 233-238.
[6]
Kumar, S.; Panda, A.K.; Singh, R.K. Preparation, and characterization of acids and alkali treated kaolin clay. Bull. Chem. Res. Catalysis, 2013, 8(1), 61-69.
[7]
Sengupta, P.; Saikia, P.; Borthakur, P.C. SEM-EDX characterization of iron-rich kaolinite clay. J. Sci. Ind. Res. (India), 2008, (67), 812-818.
[8]
Ramesh, K.C. Reduction of an expansive index of kaolinite and bentonite clay using sand and fly ash mixture., Master Thesis, Southern Minions University: Carbondale. 2014.
[9]
Xiu, F.; Lu, Y. A novel treatment of waste printed circuit boards by low-temperature near-critical aqueous ammonia: Debromination and preparation of nitrogen-containing fine chemicals. Waste Manag., 2019, 84, 355-363.
[10]
Xiu, F.R.; Wang, Y.; Yu, X.; Li, Y.; Lu, Y.; Zhou, K.; He, J.; Song, Z.; Gao, X. A novel safety treatment strategy of DEHP-rich flexible polyvinyl chloride waste through low-temperature critical aqueous ammonia treatment. Sci. Total Environ., 2020, 708 134532
[http://dx.doi.org/10.1016/j.scitotenv.2019.134532] [PMID: 31785902]
[11]
Qi, Y.; He, J.; Xiu, F.R.; Yu, X.; Gao, X.; Li, Y.; Song, Z. Convenient chemiluminescence detection for bisphenol A in E-waste dismantling site based on surface charge change of cationic gold nanoparticles. Microchem. J., 2019, 147, 789-796.
[http://dx.doi.org/10.1016/j.microc.2019.03.095]
[12]
Xiu, F.R.; Yu, X.; Qi, Y.; Li, Y.; Lu, Y.; Wang, Y.; He, J.; Zhou, K.; Song, Z.; Gao, X. A novel management strategy for removal and degradation of polybrominated diphenyl ethers (PBDEs) in waste printed circuit boards. Waste Manag., 2019, 100, 191-198.
[http://dx.doi.org/10.1016/j.wasman.2019.09.022] [PMID: 31541924]
[13]
Dudkin, B.N.; Loukhina, I.V.; Avvakumov, E.G.; Isupov, V.P. Application of mechanochemical treatment of disintegration of kaolinite with sulphuric acid. Chem. Sustain. Dev., 2004, 12, 327-330.
[14]
Saikia, B.J.; Parthasarathy, G. Fourier transform infrared spectroscopy characterization of kaolinite from Assam and Meghalaya, Northeastern India. J. Mod. Phys., 2010, 1, 206-210.
[http://dx.doi.org/10.4236/jmp.2010.14031]
[15]
Aroke, U.O.; Abdulkarim, A.; Ogunbunka, R.O. Fourier transform infrared characterization of kaolin, granite, bentonite, and barite, ATBU J. Environ. Technol., 2013, 6(1), 42-53.
[16]
Padmaja, P.; Anilkumar, G.M.; Mukundan, P.; Aruldhas, G.; Warrier, K.G.K. Characterization of stochiometric solgel mullite by Fourier transform infrared spectroscopy. Int. J. Inorg. Mater., 2003, 3, 693-698.
[http://dx.doi.org/10.1016/S1466-6049(01)00189-1]
[17]
Georges-IVO, E.E. Fourier transform infrared spectrometry and X-ray powder diffraction as complementary techniques in characterizing clay size fraction of kaolin. J. Appl. Sci. Environ. Manag., 2005, 9(2), 43-48.
[18]
Dewi, R.; Agusnar, H. Characterization of technical kaolin using XRF, SEM, XRD, FTIR, and its potentials as industrial raw materials: SEMIRATA - First International Conference on Science and Technology, IOP Science, Medan, 5 May 2018; IOP Conference Proceedings 1116; Phys.: J. of Phy. Conference series, 2018.
[http://dx.doi.org/10.1088/1742-6596/1116/4/042010]
[19]
Saikia, N.J.; Bharali, D.J.; Sengupta, P.; Bordollo, i.D.; Goswamee, R.L.; Saikia, P.C.; Borthakur, P.C. Characterization, beneficiation and utilization of a kaolinite clay from Assam, India. Appl. Clay Sci., 2003, 24, 93-103.
[http://dx.doi.org/10.1016/S0169-1317(03)00151-0]
[20]
Bergaya, F.; Lagaly, G. General Introduction: clays, clay minerals, and clay sciences. Dev. Clay Sci., 2006, 1, 1-18.
[http://dx.doi.org/10.1016/S1572-4352(05)01001-9]
[21]
Jikan, S.S.; Badarulzaman, N.A.; Yahaya, S.; Adamu, A.D. Delamination of kaolinite by intercalation of urea using milling. Mater. Sci. Forum, 2017, 888, 136-140.www.scientific.net/msf.888.136
[http://dx.doi.org/10.4028/www.scientific.net/MSF.888.136]
[22]
Abou-El-Sherbini, K.S.; Elzahany, E.A.M.; Wahba, M.A.; Drweesh, S.A.; Youssef, N.S. Evaluation of some intercalation methods of dimethylsulphoxide onto HCl-treated and untreated Egyptian kaolinite. Appl. Clay Sci., 2017, 137, 33-42.
[http://dx.doi.org/10.1016/j.clay.2016.12.005]
[23]
Gates, W.P.; Slade, P.G.; Manceau, A.; Lanson, B. Site occupancies by iron in nontronites. Clays Clay Miner., 2002, 50(2), 223-239.
[http://dx.doi.org/10.1346/000986002760832829]
[24]
Aroke, U.O. EI-Nafaty, U. A. XRF, XRD and FTIR properties and characterization of HDTMA-Br surface-modified organo-kaolinite clay. Int. J. Emerg. Technol. Adv. Eng., 2014, 4(4), 817-825.
[25]
Jamo, H.U.; Abdu, S.G. Structural analysis and surface morphology kaolin. ScientificWorldJournal, 2014, 9(3), 29-30.
[26]
Shehu, Y.; Suzi, S.J.; Nur, A.B.; Ajia, D.A. Chemical composition and particle size analysis of kaolin. Traektoria Nauki = Path of Science, 2017, 3(10), 1001-1004.
[27]
Murad, A.; Edwin, C.O.; Hamad, S.A. FT-IR and SEM studies on natural Jordanian clays Proceedings of The IRES International Conference, Riyadh, Saudi Arabia 2016.

Rights & Permissions Print Cite
Article Metrics
11
© 2024 Bentham Science Publishers | Privacy Policy