Login Register Cart 0
Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Independent Inverse System Decoupling Control Strategy of Bearingless Induction Motor

Author(s): Wenshao Bu*, Panchao Lu, Chunxiao Lu and Yi Pu

Volume 13, Issue 7, 2020

Page: [1001 - 1009] Pages: 9

DOI: 10.2174/2352096513666200129124104

Price: $65

Abstract

Background: In the existing inverse system decoupling methods of bearingless induction motor, the inverse system model is more complex, and it is not easy to realize the independent control of the magnetic suspension system. In this paper, in order to simplify its inverse system model, an independent inverse system decoupling control strategy is proposed.

Methods: Under the conditions of considering the current dynamics of torque windings, the state equations of torque system and those of magnetic suspension system are established, and the independent inverse system model of torque system and that of the magnetic suspension system are deduced. The air gap fluxlinkage of the torque system that is needed in the magnetic suspension system is identified by an independent voltage model. After the independent inverse model of torque system and that of magnetic suspension system are connected in parallel, they are connected in front of the original system of a bearingless induction motor. After this, the torque system is decoupled into two second-order integral subsystems, i.e. a fluxlinkage subsystem and a motor speed subsystem, while the magnetic suspension system is decoupled into another two second-order integral subsystems, i.e. the α- and β-displacement component subsystems. The design of the additional closed-loop controller is achieved through the pole assignment method.

Results: The obtained inverse model of the magnetic suspension system is independent of the fluxlinkage orientation mode of torque system, and thus the flexibility of the independent control for the torque system and magnetic suspension system is increased. The simulation results have shown that the system has good static- and dynamic-decoupling control performance.

Conclusion: The proposed independent inverse system decoupling control strategy is effective and feasible.

Keywords: Bearingless induction motor, independent inverse system, decoupling control, flux-linkage orientation, pole assignment, magnetic suspension system.

Next »
Graphical Abstract

[1]
Y. Zhang, H. Deng, and W.D. Zhuo, "Stiffness-gradient- based grasping force control for an underactuated prosthetic hand", Recent Adv. Electr. Electron. Eng., vol. 11, no. 4, pp. 460-464, 2018.
[http://dx.doi.org/10.2174/2352096511666180213113017]
[2]
W.S. Bu, B. Li, and C.X. Lu, "Decoupling control strategy of BLIM considering rotor mass eccentricity", J. Contr. Sci. Eng., vol. 9579125, pp. 1-9, 2018.
[3]
H. Sugimoto, S. Tanaka, and A. Chiba, "A vibration reduction method of one-axis actively position regulated single-drive bearingless motor with repulsive passive magnetic bearings", IEEE Trans. Ind. Appl., vol. 52, no. 1, pp. 181-188, 2016.
[http://dx.doi.org/10.1109/TIA.2015.2473824]
[4]
Y.X. Sun, J.W. Tang, and K. Shi, "Design of a bearingless outer rotor induction motor", Energies, vol. 10, no. 5, pp. 1-15, 2017.
[http://dx.doi.org/10.3390/en10050705]
[5]
J.W. Zhang, H.H. Wang, and L. Chen, "Multi-objective optimal design of bearingless switched reluctance motor based on multi-objective genetic particle swarm optimizer", IEEE Trans. Magn., vol. 54, no. 1, pp. 1-13, 2017.
[http://dx.doi.org/10.1109/TMAG.2017.2751546]
[6]
Q. Ding, T.C. Ni, X.L. Wang, and Z.Q. Deng, "Optimal winding configuration of bearingless flux-switching permanent magnet motor with stacked structure", IEEE Trans. Energ. Convers., vol. 33, no. 1, pp. 78-86, 2018.
[http://dx.doi.org/10.1109/TEC.2017.2752746]
[7]
B.K. Su, X.D. Sun, and L. Chen, "Thermal modeling and analysis of bearingless permanent magnet synchronous motors", Int. J. Appl. Electromagn. Mech., vol. 56, no. 1, pp. 115-130, 2018.
[http://dx.doi.org/10.3233/JAE-170112]
[8]
H.S. Zad, T.I. Khan, and I. Lazoglu, "Design and analysis of a novel bearingless motor for a miniature axial flow blood pump", IEEE Trans. Ind. Electron., vol. 65, no. 5, pp. 4006-4016, 2018.
[http://dx.doi.org/10.1109/TIE.2017.2762626]
[9]
W.S. Bu, Z.Y. Li, and C.X. Lu, "Research on the least squares support vector machine displacement observer of a bearingless induction motor", Trans. Inst. Meas. Contr., vol. 39, no. 5, pp. 688-697, 2017.
[http://dx.doi.org/10.1177/0142331215617524]
[10]
T. Zhang, X.F. Liu, and L.H. Mo, "Modeling and analysis of hybrid permanent magnet type bearingless motor", IEEE Trans. Magn., vol. 54, no. 3, pp. 1-4, 2018.
[http://dx.doi.org/10.1109/TMAG.2017.2766661]
[11]
W.S. Bu, C.X. Lu, and C.L. Zu, "Inverse system decoupling control strategy of BLIM based on stator flux orientation", Int. J. Appl. Electromagn. Mech., vol. 48, no. 4, pp. 469-480, 2015.
[http://dx.doi.org/10.3233/JAE-140202]
[12]
Q. Li, and X.X. Liu, "Decoupling control of bearingless asynchronous motor based on rotor flux orientation with inverse system theory", Electric. Mach. Cont. Appl., vol. 37, no. 2, pp. 8-12, 2010.
[13]
Z.Q. Wang, and X.X. Wang, "Nonlinear inverse decoupling control of bearingless induction motor", Kongzhi Gongcheng, vol. 18, no. 6, pp. 970-976, 2011.
[14]
T.T. Zhang, and H.Q. Zhu, "Decoupling control based on inverse system for bearingless synchronous reluctance motor", Cont. Theory Appl., vol. 28, no. 4, pp. 545-549, 2011.
[15]
H.Q. Zhu, L. Cao, and Y.C. Li, "Decoupling control of 5-degree of freedom bearingless synchronous reluctance motor based on least square support vector machine inverse system", Zhongguo Dianji Gongcheng Xuebao, vol. 33, no. 15, pp. 99-108, 2013.
[16]
W.S. Bu, X.F. Zhang, and F.Z. He, "Sliding mode variable structure control Strategy of bearingless induction motor based on inverse system decoupling", IEEJ Trans. Electr. Electron. Eng., vol. 13, no. 7, pp. 1052-1059, 2018.
[http://dx.doi.org/10.1002/tee.22663]
[17]
X.D. Sun, L. Chen, and H.B. Jiang, "High-performance control for a bearingless permanent magnet synchronous motor using neural network inverse scheme plus internal model controllers", IEEE Trans. Ind. Electron., vol. 63, no. 6, pp. 3479-3488, 2016.
[http://dx.doi.org/10.1109/TIE.2016.2530040]
[18]
X.D. Sun, Z. Shi, and L. Chen, "Internal model control for a bearingless permanent magnet synchronous motor based on inverse system method", IEEE Trans. Energ. Convers., vol. 31, no. 4, pp. 1539-1548, 2016.
[http://dx.doi.org/10.1109/TEC.2016.2591925]
[19]
W.S. Bu, C.L. Zu, and C.X. Lu, "Decoupling control strategy of bearingless induction motor under the conditions of considering current dynamic characteristics", Cont. Theory Appl., vol. 31, no. 11, pp. 1561-1567, 2016.
[20]
H.Q. Zhu, Y.X. Shen, and T.C. Zhang, "Mathematics model and decoupling control for self-bearing induction motors", Electric Mach. Cont., vol. 11, no. 4, pp. 321-325, 2007.
[21]
Z.Q. Deng, X.L. Wang, B. Li, L.G. He, and Y.G. Yan, "Study on independent control of the levitation subsystem of bearingless induction motors", Zhongguo Dianji Gongcheng Xuebao, vol. 23, no. 9, pp. 107-111, 2003.
[22]
Y.X. Sun, and Z.B. Qian, "“Study on independent robust control of levitation subsystem for bearingless induction motors”, Transact. China Electrotech", Society, vol. 31, no. 7, pp. 57-64, 2016.

Rights & Permissions Print Cite
Article Metrics
13
1
© 2024 Bentham Science Publishers | Privacy Policy