Login Register Cart 0
Generic placeholder image

Current Physical Chemistry

Editor-in-Chief

ISSN (Print): 1877-9468
ISSN (Online): 1877-9476

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Characterization of Hybrid Bio-Ceramic Hydroxyapatites Reinforced by Expanded Perlite-TiO2-ZrO2-MgO-P2O5

Author(s): Erdoğan Karip* and Mehtap Muratoğlu

Volume 10, Issue 2, 2020

Page: [136 - 143] Pages: 8

DOI: 10.2174/1877946809666191115111909

Abstract

Background: Hydroxyapatite, which is naturally and synthetically available, is often used as a biomaterial because of its similarity to bone.

Aim: In this study, Natural hydroxyapatite powder, synthesized from sheep bone, and synthetic hydroxyapatite were used as matrix.

Materials and Methods: Hybrid bio-ceramic composites were obtained by adding 5 wt. % expanded perlite-TiO2-ZrO2-MgO-P2O5 to both matrixes. The bio-ceramic materials which were mixed with mechanical mixer for 30 minutes were pressed with hydraulic press under 25 MPa pressure and sintered at 900°C for 1 hour. Density, micro-hardness, X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM) and Energy Dispersive Spectroscopy (EDS) analysis were performed to determine characteristics of the samples.

Result: As a result, it was identified that the micro-hardness of natural hydroxyapatite was higher. In addition, the increase in micro-hardness values of ZrO2-reinforced samples was higher than the TiO2-reinforced samples.

Conclusion: Hydroxyapatite, calcium silicate, calcium phosphate structures were observed in XRD analysis. Micro-pores were observed in TiO2-reinforced samples while more dense structures were observed in ZrO2-reinforced samples.

Keywords: Expanded perlite, hydroxyapatite, MgO, P2O5, TiO2, ZrO2.

« Previous Next »
Graphical Abstract

[1]
Ratner, B.; Hoffman, A.S.; Schoen, F.J.; Lemon, J.E. Biomaterials Science: An Introduction to Materials in Medicine; Elsevier: Amsterdam, Netherlands, 2004.
[2]
Hench, L.L. Bioceramics: From concept to clinic. J. Am. Ceram. Soc., 1991, 74, 1487-1510.
[http://dx.doi.org/10.1111/j.1151-2916.1991.tb07132.x]
[3]
Anee, T.K.; Ashok, M.; Palanichamy, M.; Narayana Kalkura, S. A novel technique to synthesize hydroxyapatite at low temperature. Mater. Chem. Phys., 2003, 80, 725-730.
[http://dx.doi.org/10.1016/S0254-0584(03)00116-0]
[4]
Xiao, F.; Ye, J.; Wang, Y.; Rao, P. Deagglomeration of HA during the precipitation synthesis. J. Mater. Sci., 2005, 40(20), 5439-5442.
[http://dx.doi.org/10.1007/s10853-005-1919-6]
[5]
Lin, D.Y.; Wang, X.X. A novel method to synthesize hydroxyapatite coating with hierarchical structure. Colloids Surf. B Biointerfaces, 2011, 82(2), 637-640.
[http://dx.doi.org/10.1016/j.colsurfb.2010.09.025] [PMID: 20965703]
[6]
Weiner, S.; Wagner, H.D. The material bone: Structure-mechanical function relations. Annu. Rev. Mater. Sci., 1998, 28, 271-298.
[http://dx.doi.org/10.1146/annurev.matsci.28.1.271]
[7]
Yelten, A.; Yilmaz, S.; Oktar, F.N. Sol–gel derived alumina–hydroxyapatite–tricalcium phosphate porous composite powders. Ceram. Int., 2012, 38(4), 2659-2665.
[http://dx.doi.org/10.1016/j.ceramint.2011.11.032]
[8]
Hench, L.L.; Jones, J.R. Biomaterials, artificial organs, tissue engineering; Elsevier: Amsterdam, Netherlands, 2005.
[9]
Kim, H.W.; Koh, Y.H.; Li, L.H.; Lee, S.; Kim, H.E. Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol-gel method. Biomaterials, 2004, 25(13), 2533-2538.
[http://dx.doi.org/10.1016/j.biomaterials.2003.09.041] [PMID: 14751738]
[10]
Choi, D.W.; Marra, K.G.; Kumta, P.N. Chemical synthesis of hydroxyapatite/poly (caprolactone) composites. Mater. Res. Bull., 2004, 39(3), 417-432.
[http://dx.doi.org/10.1016/j.materresbull.2003.10.013]
[11]
Kong, Y.M.; Bae, C.J.; Lee, S.H.; Kim, H.W.; Kim, H.E. Improvement in biocompatibility of ZrO2-Al2O3 nano-composite by addition of HA. Biomaterials, 2005, 26(5), 509-517.
[http://dx.doi.org/10.1016/j.biomaterials.2004.02.061] [PMID: 15276359]
[12]
Niemann, R. Perlitein neuer sinteraktiver Mineralfüllstoff für die keramische Industrie. Ziegelindustrie ZI International, 1991, 44, 125.
[13]
Kolvari, E.N. Koukabi.; M.M. Hosseini. Perlite: A cheap natural support for immobilization of sulfonic acid as a heterogeneous solid acid catalyst for the heterocyclic multicomponent reaction. J. Mol. Catal. Chem., 2015, 397, 68-75.
[http://dx.doi.org/10.1016/j.molcata.2014.10.026]
[14]
Gutowska, I.; Machoy, Z.; Machaliński, B. The role of bivalent metals in hydroxyapatite structures as revealed by molecular modeling with the HyperChem software. J. Biomed. Mater. Res. A, 2005, 75(4), 788-793.
[http://dx.doi.org/10.1002/jbm.a.30511] [PMID: 16138331]
[15]
Kalita, S.J.; Bhatt, H.A.; Dhamne, A. MgO-Na2O-P2O5 based sintering additives for tricalcium phosphate bioceramics. J. Am. Ceram. Soc., 2006, 89(3), 875-881.
[http://dx.doi.org/10.1111/j.1551-2916.2005.00854.x]
[16]
Gündüz, O.; Ahmaz, Z.; Ekren, N.; Agathopoulos, S.; Salman, S.; Oktar, F.N. Reinforcing of biologically derived apatite with commercial inert glass. J. Thermoplastics Composit. Mater., 2009, 22, 407-419.
[http://dx.doi.org/10.1177/0892705709105974]
[17]
Demirkol, N.; Oktar, F.N.; Kayali, E.S. Influence of commercial inert glass addition on the mechanical properties of commercial synthetic hydroxyapatite. Acta Phys. Pol. A, 2013, 123, 427-429.
[http://dx.doi.org/10.12693/APhysPolA.123.427]
[18]
Salman, S.; Oktar, F.N.; Gündüz, O.; Agathopoulos, S.; Öveçoğlu, M.L.; Kayalı, E.S. Sintering effect on mechanical properties of composites made of Bovine Hydroxyapatite (BHA) and Commercial Inert Glass (CIG). Key Eng. Mater., 2007, 330-332, 189-192.
[http://dx.doi.org/10.4028/www.scientific.net/KEM.330-332.189]
[19]
Manicone, P.F.; Rossi Iommetti, P.; Raffaelli, L. An overview of zirconia ceramics: Basic properties and clinical applications. J. Dent., 2007, 35(11), 819-826.
[http://dx.doi.org/10.1016/j.jdent.2007.07.008] [PMID: 17825465]
[20]
Liu, X.M.; Yan, Z.F. Phase transformation of nanosized zirconia. J. Struct. Chem., 2006, 25, 424-432.
[21]
Bouslama, N.; Ayed, F.B.; Bouaziz, J. Sintering and mechanical properties of Tricalcium phosphate-fluorapatite composites. Ceram. Int., 2009, 35, 1909-1917.
[http://dx.doi.org/10.1016/j.ceramint.2008.10.030]
[22]
Rey, C.; Combes, C.; Drouet, C.; Sfihi, H.; Barroug, A. Physico chemical properties of nanocrystalline apatites: Implications for biominerals and biomaterials. Mater. Sci. Eng. C, 2007, 27, 198-205.
[http://dx.doi.org/10.1016/j.msec.2006.05.015]
[23]
Regi, M.V. Ceramics for medical applications. J. Chem. Soc., Dalton Trans., 2001, 97-108.
[http://dx.doi.org/10.1039/b007852m]
[24]
Edwin, N.; Wilson, P. Investigations on sonofragmentation of hydroxyapatite crystals as a function of strontium incorporation. Ultrason. Sonochem., 2019, 50, 188-199.
[http://dx.doi.org/10.1016/j.ultsonch.2018.09.018] [PMID: 30274891]
[25]
Safarzadeh, M.; Ramesh, S.; Tan, C.Y.; Chandran, H.; Noor, A.F.M.; Krishnasamy, S.; Alengaram, U.J. Effect of multi-ions doping on the properties of carbonated hydroxyapatite bioceramic. Ceram. Int., 2019, 45, 3473-3477.
[http://dx.doi.org/10.1016/j.ceramint.2018.11.003]

Rights & Permissions Print Cite
Article Metrics
5
© 2024 Bentham Science Publishers | Privacy Policy