Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Research Article

Total-dose Effects on Power MOSFET in SEPIC Converter for Nanosatellite Applications

Author(s): Saranya Krishnamurthy, Ramani Kannan*, Faidhi F.A. Mohamad, Muhamad S. Ahmad and Yusof Abdullah

Volume 13, Issue 5, 2020

Page: [758 - 765] Pages: 8

DOI: 10.2174/2352096512666191004154951

Price: $65

Abstract

Background: Power converters used in nanosatellite application required to be more tolerant to radiations including proton, electron and heavy-ion radiation.

Methods: A Single-Ended Primary Inductance Converter (SEPIC) is selected for the nanosatellite application because of the availability to step up and down the input voltage as well as having a non-inverting polarity between the input and output voltage. In this paper, remodeled SEPIC converter proposed with an improved performance at radiation environment to work for nanosatellite application. In addition, the analysis is carried out for the irradiated power MOSFET in SEPIC converter to check its impact on converter behavior.

Results: Experiments conducted with the help of power MOSFET switch used in converter, irradiated with Cobalt60 gamma ray dose level from 50krad to 300krad and output characteristics analyzed by chancing the duty cycle of converter. Investigations shown that conventional converter output characteristics were virtually constant from 10% to 60% duty cycle when different radiated MOSFETs used in the converter.

Conclusion: The electrical characteristics started to fluctuate at 60% duty cycle and onwards, while the remodeled converter circuit was less distorted when increasing the radiation dose.

Keywords: SEPIC converter, power MOSFET, total dose radiation effects, electrical characteristics, gama ray, nanosatellite.

« Previous
Graphical Abstract

[1]
O.Z.G.E. Amutkan, "Space Radiation Environment and Radiation Hardness Assurance Tests of Electronic Components to be Used In Space Missions",.Middle East Technical University, Ankara: PhD of philosophy in physics thesis, , 2010
[2]
Y.H. Lho, Y.S. Hwang, and Y.L. Sang, "A study on radiation effects on PWMIC controller of DC/DC power buck converter", In: , 13th International Conference, 2013, pp. 1754-1757
[http://dx.doi.org/10.1109/ICCAS.2013.6704221]
[3]
Y. He, Y. En, H. Luo, and X. He, "The irradiation effect and failure analysis of DC-DC power converter", Physical and Failure Analysis of Integrated Circuits, In: 16th IEEE International Symposium on the IEEE , 2009 pp. 385-387.
[http://dx.doi.org/10.1109/IPFA.2009.5232625]
[4]
J.O. Attia, D. Zhang, E. Issa, and M. David Kankam, "Effects of TID on transistor parameters of DC-DC converters", In: , Adiation and Its Effects on Components and Systems, 2007. RADECS 2007. 9th European Conference on IEEE , 2007
[http://dx.doi.org/10.1109/RADECS.2007.5205497]
[5]
A. Chub, O. Husev, and D. Vinnikov, "Passive modular structure of a SEPIC based DC/DC converter", In: , Intelligent Energy and Power Systems (IEPS), 2014 IEEE International Conference on IEEE, 2014, pp. 81-85.
[http://dx.doi.org/10.1109/IEPS.2014.6874208]
[6]
O. Kircioğlu, M. Ünlü, and S. Camur, "Modeling and analysis of DC-DC SEPIC converter with coupled inductors", Industrial Electronics (INDEL), International Symposium on IEEE, 2016, pp. 1-5.
[http://dx.doi.org/10.1109/INDEL.2016.7797807]
[7]
R.K. Pachauri, and Y.K. Chauhan, "Modeling and simulation analysis of PV fed Cuk, Sepic, Zeta and Luo DC-DC converter", In: , Power Electronics, Intelligent Control and Energy Systems (ICPEICES), IEEE International Conference on IEEE, 2016, pp. 1-6.
[8]
P.C. Adell, R.D. Schrimpf, B.K. Choi, W.T. Holman, J.P. Attwood, C.R. Cirba, and K.F. Galloway, "Total-dose and single-event effects in switching DC/DC power converters", IEEE Trans. Nucl. Sci., vol. 49, no. 6, pp. 3217-3221, 2002.
[http://dx.doi.org/10.1109/TNS.2002.805425]
[9]
S.F.O. Abubakkar, N.F. Zabah, Y. Abdullah, D.A. Fauzi, N. Muridan, and N.F. Hasbullah, "Effects of electron radiation on commercial power MOSFET with buck converter application", Nucl. Sci. Tech., vol. 28, no. 3, p. 31, 2017.
[http://dx.doi.org/10.1007/s41365-017-0189-8]
[10]
P.F. De Melo, R. Gules, E.F.R. Romaneli, and R.C. Annunziato, "A modified SEPIC converter for high-power-factor rectifier and universal input voltage applications", IEEE Trans. Power Electron., vol. 25, no. 2, pp. 310-321, 2010.
[http://dx.doi.org/10.1109/TPEL.2009.2027323]
[11]
J. Falin, "Designing DC/DC converters based on SEPIC topology."Analog Applicat, 2008, pp. 19-20.
[12]
J.K. Kim, and G.W. Moon, "Derivation, analysis, and comparison of nonisolated single-switch high step-up converters with low voltage stress", IEEE Trans. Power Electron., vol. 30, no. 3, pp. 1336-1344, 2015.
[http://dx.doi.org/10.1109/TPEL.2014.2316324]
[13]
D. Makowski, "The impact of radiation on electronic devices with the special consideration of neutron and gamma radiation monitoring." In. , Elektryka/Politechnika Łódzka, vol. 111. 2007, pp. 73-80.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy