Abstract
Background: Designing an analytical methodology for complicated matrices, such as biological and environmental samples, is difficult since the sample preparation procedure is the most demanding step affecting the whole analytical process. Nowadays, this step has become more challenging by the legislations and environmental concerns since it is a prerequisite to eliminate or minimize the use of hazardous substances in traditional procedures by replacing with green techniques suitable for the sample matrix.
Methods: In addition to the matrix, the nature of the analyte also influence the ease of creating green analytical techniques. Recent developments in the chemical analysis provide us new methodologies introducing microextraction techniques and among them, solid phase microextraction (SPME) has emerged as a simple, fast, low cost, reliable and portable sample preparation technique that minimizes solvent consumption. Results: The use of home-made fibers is popular in the last two decades since the selectivity can be tuned by changing the surface characteristics through chemical and electrochemical modifications. Latter technique is preferred since the electroactive polymers can be coated onto the fiber under controlled electrochemical conditions and the film thicknesses can be adjusted by simply changing the deposition parameters. Thermal resistance and mechanical strength can be readily increased by incorporating different dopant ions into the polymeric structure and selectivity can be tuned by inserting functional groups and nanostructures. A vast number of analytes with wide range of polarities extracted by this means can be determined with a suitable chromatographic detector coupled to the system. Therefore, the main task is to improve the physicochemical properties of the fiber along with the extraction efficiency and selectivity towards the various analytes by adjusting the electrochemical preparation conditions. Conclusion: This review covers the fine tuning conditions practiced in electrochemical preparation of SPME fibers and in-tube systems and their applications in environmental, food and clinical analysis.Keywords: Conductive polymers, electrochemical synthesis, electrochemically controlled SPME, metal oxides, polymeric composite, SPME.
Graphical Abstract
[1]
Commission of the European Communities. Community Strategy for Endocrine Disrupters, a Range of Substances Suspected of Interfering with the Hormone Systems of Humans and Wildlife, COM 706 final, 1999.
[2]
Mitra, S. Sample Preparation Techniques in Analytical Chemistry, 1st ed; Wiley & Sons, Inc.: Hoboken, New Jersey, 2003.
[3]
Keith, L.H.; Gron, L.U.; Young, J.L. Green analytical methodologies. Chem. Rev., 2007, 107, 2695-2708.
[4]
Wasik, A.; Wasik, A.K.; Namiesnik, J. New trends in sample preparation techniques for the analysis of the residues of pharmaceuticals in environmental. Curr. Anal. Chem., 2016, 12, 280-302.
[5]
Calderilla, C.; Maya, F.; Leal, L.O.; Cerdà, V. Recent advances in flow-based automated solid-phase extraction. Trends Analyt. Chem., 2018, 108, 370-380.
[6]
Arthur, C.L.; Pawliszyn, J. Solid phase microextraction with thermal desorption using fused silica optical fibers. Anal. Chem., 1990, 62, 2145-2148.
[7]
Berlardi, R.; Pawliszyn, J. The application of chemically modified fused silica fibers in the extraction of organics from water matrix samples and their rapid transfer to capillary columns. Water Pollut. Rev. J. Can., 1989, 24, 179-191.
[9]
Sayar, O.; Aboufazeli, F. Hamid., R.L.Z.Z.; Sadeghi, O.; Karimi, M.; Najafi, E. Optimization of solid-phase extraction by experimental design methodology for determination of lead ions using graphene modified nano-sheets as a novel sorbent. Curr. Anal. Chem., 2014, 10, 512-521.
[10]
Prieto, A.; Araujo, L.; Navalon, A.; Vilchez, J.L. Comparison of solid-phase extraction and solid-phase microextraction using octadecylsilane phase for the determination of pesticides in water samples. Curr. Anal. Chem., 2009, 5, 219-224.
[11]
Wang, H.; Liu, W.; Guan, Y. In-Tube Solid-Phase microextraction and on-line coupling with high-resolution GC. LC GC Eur., 2004, 17(3), 144-151.
[12]
Baltussen, E.; Sandra, P.; David, F.; Cramers, C. Stir bar sorptive extraction (SBSE), a novel extraction technique for aqueous samples: Theory and principles. J. Microcolumn Sep., 1999, 11, 737-747.
[13]
Piri-Moghadam, H.; Alam, M.N.; Pawliszyn, J. Review of geometries and coating materials in solid phase microextraction: Opportunities, limitations, and future perspectives. Anal. Chim. Acta, 2017, 984, 42-65.
[14]
Ouyang, G.; Pawliszyn, J. Recent developments in SPME for on-site analysis and monitoring. Trends Analyt. Chem., 2006, 25, 692-703.
[15]
Kataoka, H.; Ishizaki, A.; Saito, A.K. Recent progress in solid-phase microextraction and its pharmaceutical and biomedical applications. Anal. Methods, 2016, 8, 5773-5788.
[16]
Souza-Silva, É.A.; Gionfriddo, E.; Shirey, R.; Sidisky, L.; Pawliszyn, J. Methodical evaluation and improvement of matrix compatible PDMS-overcoated coating for direct immersion solid phase microextraction gas chromatography (DI-SPME-GC)-based applications. Anal. Chim. Acta, 2016, 12, 54-62.
[17]
Bagheri, H.; Piri-Moghadam, H.; Naderi, M. Towards greater mechanical, thermal and chemical stability in solid-phase microextraction. Trends Analyt. Chem., 2012, 34, 126-139.
[18]
Amiri, A. Solid-phase microextraction-based sol-gel technique. TrAC. Trends Analyt. Chem., 2016, 75, 57-74.
[19]
Aziz-Zanjani, M.O.; Mehdinia, A. Electrochemically prepared solid-phase microextraction coatings. Anal. Chim. Acta, 2013, 781, 1-13.
[20]
Korba, K.; Pelit, L.; Pelit, O.F.; Özdokur, K.V.; Ertas, H.; Eroğlu, A.E.; Ertas, F.N. Preparation and characterization of sodium dodecyl sulfate dopedpolypyrrole solid phase micro extraction fiber and its application to endocrine disruptor pesticide analysis. J. Chromatogr. B , 2013, 929, 90-96.
[21]
Bagheri, H.; Ayazi, Z.; Naderi, M. Conductive polymer-based microextraction methods: A review. Anal. Chim. Acta, 2013, 767, 1-13.
[22]
Wu, J.; Pawliszyn, J. Preparation and applications of polypyrrole films in solid-phase microextraction. J. Chromatogr. A, 2001, 909, 37-52.
[23]
Wu, J.; Mullett, W.M.; Pawliszyn, J. Electrochemically controlled solid-phase microextraction based on conductive polypyrrole films. Anal. Chem., 2002, 74, 4855-4859.
[24]
Lewis, T.W.; Wallace, G.G.; Smyth, M.R. Electrofunctional polymers: Their role in the development of new analytical systems. Analyst , 1999, 124, 213-219.
[25]
Liljegren, G.; Nyholm, L. Electrochemically controlled solid-phase microextraction and preconcentration using polypyrrole coated microarray electrodes in a flow system. Analyst , 2003, 128, 232-236.
[26]
Tamer, U.; Ertaş, N.; Udum, Y.A.; Şahin, Y.; Pekmez, K.; Yıldız, A. Electrochemically controlled solid-phase microextraction (EC-SPME) based on overoxidized sulfonated polypyrrole. Talanta, 2005, 67, 245-251.
[27]
Kalhor, H.; Ameli, A.; Alizadeh, N. Electrochemically controlled solid-phase micro-extraction of proline using a nanostructured film of polypyrrole, and its determination by ion mobility spectrometry. Mikrochim. Acta, 2013, 180, 783-789.
[28]
Alizadeh, N.; Samaei, E.; Kalhor, H. Electrochemically controlled solid phase microextraction of ibuprofen based on nanostructure conducting molecular imprinted polypyrrole and selective analysis in biological and formulation samples using ion mobility spectrometry. Anal. Methods, 2014, 6, 2909-2915.
[29]
Ahmadi, S.H.; Manbohi, A.; Heydar, K.T. Electrochemically controlled in-tube solid phase microextraction. Anal. Chim. Acta, 2015, 853, 335-341.
[30]
Asiabi, H.; Yamini, Y.; Shamsaye, M. Development of electrochemically controlled packed-in-tube solid phase microextraction method for sensitive analysis of acidic drugs in biological samples. Talanta, 2018, 185, 80-88.
[31]
Wu, J.; Yu, X.; Lord, H.; Pawliszyn, J. Solid phase microextraction of inorganic anions based on polypyrrole film. Analyst , 2000, 125, 391-394.
[32]
Abdolhosseini, S.; Ghiasvand, A.; Heidari, N. A high area, porous and resistant platinized stainless steel fiber coated by nanostructured polypyrrole for direct HS-SPME of nicotine in biological samples prior to GC-FID quantification. J. Chromatogr. B ., 2017, 1061-1062, 5-10.
[33]
Minjia, H.; Chao, T.; Qunfang, Z.; Guibin, J. Preparation of polyaniline coating on a stainless-steel wire using electroplating and its application to the determination of six aromatic amines using headspace solid-phase microextraction. J. Chromatogr. A, 2004, 1048, 257-262.
[34]
Bagheri, H.; Mir, A.; Babanezhad, E. An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water. Anal. Chim. Acta, 2005, 532, 89-95.
[35]
Djozan, D.; Bahar, S. Solid-Phase Microextraction of aliphatic alcohols based on polyaniline coated fibers. Chromatographia, 2004, 59, 95-99.
[36]
Li, X.; Zhong, M.; Xu, S.; Sun, C. Determination of phthalates in water samples using polyaniline-based solid-phase microextraction coupled with gas chromatography. J. Chromatogr. A, 2006, 1135, 101-108.
[37]
Wang, Y.; Li, Y.; Zhang, J.; Xu, S.; Yang, S.; Sun, C. A novel fluorinated polyaniline-based solid-phase microextraction coupled with gas chromatography for quantitative determination of polychlorinated biphenyls in water samples. Anal. Chim. Acta, 2009, 646, 78-84.
[38]
Wang, Y.; Zhang, J.; Sheng, D.; Sun, C. Preparation and applications of perfluorinated ion doped polyaniline based solid-phase microextraction fiber. J. Chromatogr. A, 2010, 1217, 4523-4528.
[39]
Mehdinia, A.; Asiabi, M.; Jabbari, A.; Kalaee, M.R. Preparation and evaluation of solid-phase microextraction fiber based on nano-structured copolymer of aniline and m-amino benzoic acid coating for the analysis of fatty acids in zooplanktons. J. Chromatogr. A, 2010, 1217, 7642-7647.
[40]
Mehdinia, A.; Roohi, F.; Jabbari, A.; Manafi, M.R. Self-doped polyaniline as new polyaniline substitute for solid-phase microextraction. Anal. Chim. Acta, 2011, 683, 206-211.
[41]
Liu, L.; Liu, H.X.; Li, Y.; Du, X.Z.; Du, X.Z. Evaluation of the counter ıons in doped porous polyaniline coatings on stainless steel wires for solid phase microextraction of chlorophenolics in water combined with high-performance liquid chromatography. Anal. Lett., 2014, 47(15), 2508-2521.
[42]
Li, X.; Li, C.; Chen, J.; Li, C.; Sun, C. Polythiophene as a novel fiber coating for solid-phase microextraction. J. Chromatogr. A, 2008, 1198-1199, 7-13.
[43]
Olszowy, P.; Szultka, M.; Fuchs, P.; Kegler, R.; Mundkowski, R.; Miekisch, W.; Schubert, J.; Buszewski, B. New coated SPME fibers for extraction and fast HPLC determination of selected drugs in human blood. J. Pharm. Biomed. Anal., 2010, 53, 1022-1027.
[44]
Pelit, L.; Dizdaş, T.N. Preparation and application of a polythiophene solid-phase microextraction fiber for the determination of endocrine-disruptor pesticides in well waters. J. Sep. Sci., 2013, 36, 3234-3241.
[45]
Caris, J.A.; Chaves, A.R.; Eugênia, M.; Queiroz, C. Evaluation of solid-phase microextraction using a polythiophene film and liquid chromatography with spectrophotometric detection for the determination of antidepressants in plasma samples. J. Braz. Chem. Soc., 2012, 23, 57-64.
[46]
Spietelun, A.; Marcinkowski, L.; de la Guardia, M.; Namiesnika, J. Recent developments and future trends in solid phase microextraction techniques towards green analytical chemistry. J. Chromatogr. A, 2013, 1321, 1-13.
[47]
Lashgari, M.; Yaminia, Y. An overview of the most common lab-made coating materials in solid phase microextraction. Talanta, 2019, 191, 283-306.
[48]
Piri-Moghadam, H.; Ahmadi, F.; Pawliszyn, J. A critical review of solid phase microextraction for analysis of water samples. TrAC. Trends Analyt. Chem., 2016, 85, 133-143.
[49]
Merkle, S.; Kleeberg, K.K.; Fritsche, J. Recent developments and applications of Solid Phase Microextraction (SPME) in food and environmental analysis-A review. Chromatography , 2015, 2, 293-381.
[50]
Xu, J.; Zheng, J.; Tian, J.; Zhu, F.; Zeng, F.; Su, C.; Ouyang, G. New materials in solid-phase microextraction. Trends Analyt. Chem., 2013, 47, 68-83.
[51]
Yu, H.; Ho, T.D.; Anderson, J.L. Ionic liquid and polymeric ionic liquid coatings in solid-phase microextraction. Trends Analyt. Chem., 2013, 45, 219-232.
[52]
Ho, T.D.; Canestraro, A.J.; Anderson, J.L. Ionic liquids in solid-phase microextraction: A review. Anal. Chim. Acta, 2011, 695, 18-43.
[53]
Zhao, F.; Wang, M.; Ma, Y.; Zeng, B. Electrochemical preparation of polyaniline-ionic liquid based solid phase microextraction fiber and its application in the determination of benzene derivatives. J. Chromatogr. A, 2011, 1218, 387-391.
[54]
Gao, Z.; Li, W.; Liu, B.; Liang, F.; He, H.; Yang, S.; Sun, C. Nano-structured polyaniline-ionic liquid composite film coated steel wire for headspace solid-phase microextraction of organochlorine pesticides in water. J. Chromatogr. A, 2011, 1218, 6285-6291.
[55]
Wu, M.; Zhang, H.; Zhao, F.; Zeng, B. A novel poly(3,4-ethylenedioxythiophene)-ionic liquid composite coating for the headspace solid-phase microextraction and gas chromatography determination of several alcohols in soft drinks. Anal. Chim. Acta, 2014, 850, 41-48.
[56]
Feng, J.; Qiu, H.; Liu, X.; Jiang, S. The development of solid-phase microextraction fibers with metal wires as supporting substrates. Trends Analyt. Chem., 2013, 46, 44-58.
[57]
Gionfriddo, E.; Souza-Silva, É.A.; Ho, T.D.; Anderson, J.L.; Pawliszyn, J. Exploiting the tunable selectivity features of polymeric ionic liquid-based SPME sorbents in food analysis. Talanta, 2018, 188, 522-530.
[58]
Anderson, J.L.; Clark, K.D. Ionic liquids as tunable materials in (bio)analytical chemistry. Anal. Bioanal. Chem., 2018, 410, 4565-4566.
[59]
Zheng, J.; Huang, J.; Yang, Q.; Ni, C.; Xie, X.; Shi, Y.; Sun, J.; Zhu, F.; Ouyang, G. Fabrications of novel solid phase microextraction fiber coatings based on new materials for high enrichment capability. Trends Analyt. Chem., 2018, 108, 135-153.
[60]
Yang, L.; Zhang, J.; Zhao, F.Q.; Zeng, B.Z. Electrodeposition of self-assembled poly(3,4-ethylenedioxythiophene)@gold nanoparticles on stainless steel wires for the headspace solid-phase microextraction and gas chromatographic determination of several polycyclic aromatic hydrocarbons. J. Chromatogr. A, 2016, 1471, 80-86.
[61]
Amanzadeh, H.; Yamini, Y.; M, Moradi. Zinc oxide/polypyrrole nanocomposite as a novel solid phase microextraction coating for extraction of aliphatic hydrocarbons from water and soil samples. Anal. Chim. Acta, 2015, 884, 52-60.
[62]
Djozan, D.; Assadi, Y.; Haddadi, S.H. Anodized aluminum wire as a solid-phase microextraction fiber. Anal. Chem., 2001, 73, 4054-4058.
[63]
Djozan, D.; Abdollahi, L. Anodized zinc wire as a solid-phase microextraction fiber. Chromatographia, 2003, 57, 799-804.
[64]
Farajzadeh, M.A.; Rahmani, N.A. Electrolytically produced copper(I) chloride on the copper wire as an excellent sorbent for some amines. Talanta, 2005, 65, 700-704.
[65]
Liu, H.; Wang, D.; Ji, L.; Li, J.; Liu, S.; Liu, X. Shengxiang, J. A novel TiO2 nanotube array/Ti wire incorporated solid-phase microextraction fiber with high strength, efficiency and selectivity. J. Chromatogr. A, 2010, 1217, 1898-1903.
[66]
Mehdinia, A.; Mousavi, M.F.; Shamsipur, M. Nano-structured lead dioxide as a novel stationary phase for solid-phase microextraction. J. Chromatogr. A, 2006, 1134, 24-31.
[67]
Budziak, D.; Martendal, E.; Carasek, E. Preparation and application of NiTi alloy coated with ZrO2 as a new fiber for solid-phase microextraction. J. Chromatogr. A, 2007, 1164, 18-24.
[68]
Jiang, H.; Li, J.S.; Hu, X.R.; Shen, J.Y.; Sun, X.Y.; Han, W.Q.; Wang, L.J. Ordered mesoporous silica film as a novel fiber coating for solid-phase microextraction. Talanta, 2017, 174, 307-313.
[69]
Zarpon, L.; Abate, G.; dos Santos, L.B.O.; Masini, J.C. Montmorillonite as an adsorbent for extraction and concentration of atrazine, propazine, deethylatrazine, deisopropylatrazine and hydroxyatrazine. Anal. Chim. Acta, 2006, 579, 81-87.
[70]
Kawasumi, M.; Hasegawa, N.; Kato, M.; Usuki, A.; Okada, A. Preparation and mechanical properties of polypropylene clay hybrids. Macromolecules, 1997, 30, 6333-6338.
[71]
Jafari, M.T.; Saraji, M.; Sherafatmand, H. Polypyrrole/montmori-llonite nanocomposite as a new solid phase microextraction fiber combined with gas chromatography-corona discharge ion mobility spectrometry for the simultaneous determination of diazinon and fenthion organophosphorus pesticides. Anal. Chim. Acta, 2014, 814, 69-78.
[72]
Yalçınkaya, E.E.; Pelit, F.O.; Güney, I.; Türkmen, H. Ionic liquid intercalated clay nanofillers for chromatographic applications. J. Porous Mater., 2014, 21, 1151-1158.
[73]
Aftafa, C.; Pelit, F.O.; Yalçınkaya, E.E.; Turkmen, H.; Kapdan, I.; Ertaş, F.N. Ionic liquid intercalated clay sorbents for micro solid phase extraction of steroid hormones from water samples with analysis by liquid chromatography-tandem mass spectrometry. J. Chromatogr. A, 2014, 1361, 43-52.
[74]
Pelit, F.O.; Pelit, L.; Dizdaş, T.N.; Aftafa, C.; Ertaş, H.; Yalçınkaya, E.E.; Türkmen, H.; Ertaş, F.N. A novel polythiophene - ionic liquid modified clay composite solid phase microextraction fiber: Preparation, characterization and application to pesticide analysis. Anal. Chim. Acta, 2015, 859, 37-45.
[75]
Fiscal-Ladino, J.A.; Obando-Ceballos, M.; Rosero-Moreano, M.; Montaño, D.F.; Richter, P. Ionic liquids intercalated in montmorillonite as the sorptive phase for the extraction of low-polarity organic compounds from water by rotating-disk sorptive extraction. Anal. Chim. Acta, 2017, 953, 23-31.
[76]
Azzouz, A.; Kailasa, S.K.; Lee, S.S.; Rascon, A.J.; Ballesteros, E.; Zhang, M.; Kim, K.H. Review of nanomaterials as sorbents in solid-phase extraction for environmental samples. Trends Analyt. Chem., 2018, 108, 347-369.
[77]
Bitas, D.; Samanidou, V. Carbon nanotubes as sorbent materials for the extraction of pharmaceutical products followed by chromatographic analysis. In: Fullerens, Graphenes and Nanotubes, A Pharmaceutical Approach; Grumezescu, A.M., Ed.; Elsevier: Amsterdam, 2018, pp. 135-168.
[78]
Wang, J.X.; Jiang, D.Q.; Gu, Z.Y.; Yan, X.P. Multiwalled carbon nanotubes coated fibers for solid-phase microextraction of polybrominated diphenyl ethers in water and milk samples before gas chromatography with electron-capture detection. J. Chromatogr. A, 2006, 1137, 8-14.
[79]
Asadollahzadeh, H.; Noroozian, E.; Maghsoudi, S. Solid-phase microextraction of phthalate esters from aqueous media by electrochemically deposited carbon nanotube/polypyrrole composite on a stainless steel fiber. Anal. Chim. Acta, 2010, 669, 32-38.
[80]
Du, W.; Zhao, F.; Zeng, B. Novel multiwalled carbon nanotubes-polyaniline composite film coated platinum wire for headspace solid-phase microextraction and gas chromatographic determination of phenolic compounds. J. Chromatogr. A, 2009, 18, 3751-3757.
[81]
Chen, L.; Chen, W.; Ma, C.; Du, D.; Chen, X. Electropolymerized multiwalled carbon nanotubes/polypyrrole fiber for solid-phase microextraction and its applications in the determination of pyrethroids. Talanta, 2011, 84, 104-108.
[82]
Ghaemi, F.; Amiri, A.; Yunus, R. Methods for coating solid-phase microextraction fibers with carbon nanotubes. TrAC. Trends Analyt. Chem., 2014, 59, 133-143.
[83]
Song, X.Y.; Chen, J.; Shi, Y.P. Different configurations of carbon nanotubes reinforced solid-phase microextraction techniques and their applications in the environmental analysis. TrAC. Trends Analyt. Chem., 2017, 86, 263-275.
[84]
Zou, J.; Song, X.H.; Ji, J.J.; Xu, W.C.; Chen, J.M.; Jiang, Y.Q.; Wang, Y.R.; Chen, X.J. Polypyrrole/graphene composite‐coated fiber for the solid‐phase microextraction of phenols. Sep. Sci., 2011, 34, 2765-2772.
[85]
Ai, Y.; Wu, M.; Li, L.; Zhao, F.; Zeng, B. Highly selective and effective solid phase microextraction of benzoic acid esters using ionic liquid functionalized multiwall carbon nanotubes-doped polyaniline coating. J. Chromatogr. A, 2016, 1437, 1-7.
[86]
Li, L.; Wu, M.; Feng, Y.; Zhao, F.; Zeng, B. Doping of three-dimensional porous carbon nanotube-graphene-ionic liquid composite into polyaniline for the headspace solid-phase microextraction and gas chromatography determination of alcohols. Anal. Chim. Acta, 2016, 948, 48-54.
[87]
Bagheri, H.; Javanmardi, H.; Abbasi, A.; Banihashemi, S. A metal organic framework-polyaniline nanocomposite as a fiber coating for solid phase microextraction. J. Chromatogr. A, 2016, 1431, 27-35.
[88]
Li, J.; Wang, Y.B.; Li, K.Y.; Cao, Y.Q.; Wu, S.; Wu, L. Advances in different configurations of solid-phase microextraction and their applications in food and environmental analysis. Trends Analyt. Chem., 2015, 72, 141-152.
[89]
Xu, C.H.; Chen, G.S.; Xiong, Z.H.; Fan, Y.X.; Wang, X.C.; Liu, Y. Applications of solid-phase microextraction in food analysis. TrAC. Trends Analyt. Chem., 2016, 80, 12-29.
[90]
Hashemi, H.; Zohrabi, P.; Raza, N.; Kim, K.H. Metal-organic frameworks as advanced sorbents for the extraction and determination of pollutants from environmental, biological, and food media. Trends Analyt. Chem., 2017, 97, 65-82.
[91]
Souza-Silva, E.A.; Pawliszyn, J. Recent Advances in Solid-Phase Microextraction for Contaminant Analysis in Food Matrices In: Comprehensive Analytical Chemistry,; , 2017, vol. 76, pp. pp. 483-517.
[92]
Kamalabadi, M.; Mohammadi, A.; Alizadeh, N. Polypyrrole nanowire as an excellent solid phase microextraction fiber for bisphenol A analysis in food samples followed by ion mobility spectrometry. Talanta, 2016, 156-157, 147-153.
[93]
Dizdaş, T.N.; Pelit, F.O.; Korba, K. Pelit, l.; Kanık, F.E.; Toppare, L.; Ertaş, H.; Ertaş, F.N. Preparation and characterization of a novel solid-phase microextraction material for application to the determination of pesticides. Anal. Lett., 2016, 49, 907-916.
[94]
Lan, H.A.; Pan, D.; Sun, Y.; Guo, Y.; Wu, Z. Thin metal organic frameworks coatings by cathodic electrodeposition for solid-phase microextraction and analysis of trace exogenous estrogens in milk. Anal. Chim. Acta, 2016, 937, 53-60.
[95]
Ghiasvand, A.; Nasirian, A.; Koonani, S.; Nouriasl, K. A platinized stainless steel fiber with in‐situ coated polyaniline/polypyrrole/graphene oxide nanocomposite sorbent for headspace solid‐phase microextraction of aliphatic aldehydes in rice samples. Biomed. Chromatogr., 2017, 31, 1-8.
[96]
Roux, K.C.P.; Jasinski, E.F.; Merib, J.; Sartorelli, M.L.; Carasek, E. Application of a robust solid-phase microextraction fiber consisting of NiTi wires coated with polypyrrole for the determination of haloanisoles in water and wine. Anal. Methods, 2016, 8, 5503-5510.
[97]
Ai, Y.; Wu, M.; Yang, L.; Zhao, F.; Zeng, B. Durable porous polyaniline supported ionic liquid coating for the highly effective solid phase microextraction of trace fatty alcohols in drinks. RSC Advances, 2016, 6, 114572-114579.
[98]
Khosrowshahi, E.M.; and Razmi, H. Electrodeposition of carbon nitride nanosheets on the graphenized pencil lead as an effective sorbent. New J. Chem., 2018, 42, 15930-15936.
[99]
Saraji, M.; Rezaei, B.; Boroujeni, M.K.; Bidgoli, A.A.H. Polypyrrole/sol-gel composite as a solid-phase microextraction fiber coating for the determination of organophosphorus pesticides in water and vegetable samples. J. Chromatogr. A, 2013, 1279, 20-26.
[100]
Zhang, C.; Zhang, Z.; Li, G. Preparation of sulfonated graphene/polypyrrole solid-phase microextraction coating by in situ electrochemical polymerization for analysis of trace terpenes. J. Chromatogr. A, 2014, 1346, 8-15.
[101]
Ghiasvand, A.; Dowlatshah, S.; Nouraei, N.; Heidari, N.; Yazdankhah, F. A solid-phase microextraction platinized stainless steel fiber coated with a multiwalled carbon nanotube-polyaniline nanocomposite film for the extraction of thymol and carvacrol in medicinal plants and honey. J. Chromatogr. A, 2015, 1406, 87-93.
[102]
Xu, J.; Chen, G.; Huang, S.; Qiu, J.; Jiang, R.; Zhu, F.; Ouyang, G. Application of in vivo solid-phase microextraction in environmental analysis. Trends Analyt. Chem., 2016, 201685, 26-35.
[103]
Rohanifar, A.; Rodriguez, L.B.; Devasurendra, A.M.; Alipourasiabi, N.; Anderson, J.L.; Kirchhoff, J.R. Solid-phase microextraction of heavy metals in natural water with a polypyrrole/carbon nanotube/1, 10-phenanthroline composite sorbent material. Talanta, 2018, 188, 570-577.
[104]
Guo, M.; Song, W.; Wang, T.; Li, Y.; Wang, X.; Du, X. Phenyl-functionalization of titanium dioxide-nanosheets coating fabricated on a titanium wire for selective solid-phase microextraction of polycyclic aromatic hydrocarbons from environment water samples. Talanta, 2015, 144, 998-1006.
[105]
Kazemipour, M.; Behzadi, M.; Ahmadi, R. Poly(o-phenylenedia-mine-co-o-toluidine)/modified carbon nanotubes composite coating fabricated on a stainless steel wire for the headspace solid-phase microextraction of polycyclic aromatic hydrocarbons. Microchem. J., 2016, 128, 258-266.
[106]
Razmi, H.; Khosrowshahi, E.M.; Farrokhzadeh, S. Introduction of coiled solid phase microextraction fiber coated by mesoporous silica/cetyltrimethyl ammonium bromide for ultra-trace environmental analysis. J. Chromatogr. A, 2017, 1506, 1-8.
[107]
Feng, J.; Wang, X.; Tian, Y.; Bu, Y.; Luo, C.; Sun, M. Electrophoretic deposition of graphene oxide onto carbon fibers for in-tube solid-phase microextraction. J. Chromatogr. A, 2017, 1517, 209-214.
[108]
Asiabi, H.; Yamini, Y.; Rezaei, F.; Seidi, S. Nanostructured polypyrrole for automated and electrochemically controlled in-tube solid-phase microextraction of cationic nitrogen compounds. Microchim. Acta, 2015, 182, 1941-1948.
[109]
Abolghasemi, M.M.; Parastari, S.; Yousefi, S. A nanoporous anodized alumina wire with a nanosized hydroxyapatite coating for headspace solid- phase microextraction of phenol and chlorophenols. Microchim . Acta, 2016, 183, 241-247.
[110]
Wang, Z.; Jin, P.; Zhou, S.; Wang, X.; Du, X. Controlled growth of a porous hydroxyapatite nanoparticle coating on a titanium fiber for rapid and efficient solid-phase microextraction of polar chlorophenols, triclosan and bisphenol A from environmental water. Anal. Methods, 2018, 10, 3237-3247.
[111]
Saraji, M.; Ghani, M.; Rezaei, B.; Mokhtarianpour, M. Highly porous nanostructured copper foam fiber impregnated with an organic solvent for headspace liquid-phase microextraction. J. Chromatogr. A, 2016, 1469, 25-34.
[112]
Memarian, E.; Saeed, S.; Davarani, H.; Nojavan, S.; Movahed, S.K. Direct synthesis of nitrogen-doped graphene on platinum wire as a new fiber coating method for the solid-phase microextraction of BXes in water samples: Comparison of headspace and cold-fiber headspace modes. Anal. Chim. Acta, 2016, 935, 151-160.
[113]
Behzadi, M.; Behzadi, M. Poly(o-anisidine)/graphene oxide nanosheets composite as a coating for the headspace solid-phase microextraction of benzene, toluene, ethylbenzene and xylenes. J. Chromatogr. A, 2016, 1443, 35-42.
[114]
Ghani, M.; Mehdi, S.; Masoum, G.S. Highly porous nanostructured copper oxide foam fiber as a sorbent for head space solid-phase microextraction of BTEX from aqueous solutions. Microchem. J., 2019, 145, 210-217.
[115]
Ling, X.; Chen, Z. Immobilization of zeolitic imidazolate frameworks with assist of electrodeposited zinc oxide layer and application in online solid-phase microextraction of Sudan dyes. Talanta, 2019, 192, 142-146.
[116]
Wang, H.; Du, J.; Zhen, Q.; Zhang, R.; Wang, X.; Du, X. Selective solid-phase microextraction of ultraviolet filters in environmental water with oriented ZnO nano sheets coated nickel-titanium alloy fibers followed by high performance liquid chromatography with UV detection. Talanta, 2019, 191, 193-201.
[117]
Yang, Y.; Lei, Y.; Zhang, R.; Wang, X.; Du, X. Electrochemical fabrication of two-dimensional copper oxide nanosheets on stainless steel as a fiber coating for highly sensitive solid-phase microextraction of ultraviolet filters. Anal. Methods, 2018, 10, 4044-4052.
[118]
Ma, M.; Wang, H.; Zhang, M.; Zhen, Q.; Du, X. Facile fabrication of polyaniline coated titania nanotube arrays as fiber coatings for solid phase microextraction coupled to high performance liquid chromatography for sensitive determination of UV filters in environmental water samples. Anal. Methods, 2017, 9, 211-221.
[119]
Asiabi, H.; Yamini, Y.; Seidi, S.; Safari, M.; Shamsayei, M. Evaluation of in-tube solid-phase microextraction method for co-extraction of acidic, basic, and neutral drugs. RSC Advances, 2016, 6, 14049-14058.
[120]
Alizadeh, N.; Mohammadia, A.; Tabrizchi, M. Rapid screening of methamphetamines in human serum by headspace solid-phase microextraction using a dodecylsulfate-doped polypyrrole film coupled to ion mobility spectrometry. J. Chromatogr. A, 2008, 1183, 21-28.
[121]
Nezhadali, A.; Bonakdar, G.A.; Nakhaei, H. Electrosynthesis of polypyrrole on steel fiber for solid-phase microextraction of citalopram in serum. Anal. Bioanal. Chem., 2012, 403, 593-600.
[122]
Zeng, J.; Chena, J.; Li, M.; Subhan, F.; Chong, F.; Wen, C.; Yu, J.; Cui, B.; Chen, X. Determination of amphetamines in biological samples using electroenhanced solid-phase microextraction-gas chromatography. J. Chromatogr. B ., 2015, 1000, 169-175.
[123]
Olszowy, P.; Szultka, M.; Ligor, T.; Nowaczyk, J.; Buszewski, B. Fibers with polypyrrole and polythiophene phases for isolation and determination of adrenolytic drugs from human plasma by SPME-HPLC. J. Chromatogr. B , 2010, 878, 2226-2234.
[124]
Buszewski, B.; Szultka, M.; Olszowy, P.; Bocian, S.; Ligor, T. A novel approach to the rapid determination of amoxicillin in human plasma by solid phase microextraction and liquid chromatography. Analyst , 2011, 136, 2635-2642.
[125]
Olszowy, P.; Szultka, M.; Nowaczyk, J.; Buszewski, B. A new way of solid-phase microextraction fibers preparation for selected antibiotic drug determination by HPLC-MS. J. Chromatogr. B ., 2011, 879, 2542-2548.
[126]
Olszowy, P.; Szultka, M.; Buszewski, B. Poly(3-alkylthiophenes): new sorption materials for solid phase microextraction of drugs isolated from human plasma. Anal. Bioanal. Chem., 2011, 401, 1377-1384.
[127]
Szultka, M.; Szeliga, J.; Jackowski, M.; Buszewski, B. Development of novel molecularly imprinted solid-phase microextraction fibers and their application for the determination of antibiotic drugs in biological samples by SPME-LC/MS. Anal. Bioanal. Chem., 2012, 403, 785-796.
[128]
Alidoust, M.; Seidi, S.; Rouhollahi, A.; Shanehsaz, M. In-tube electrochemically controlled solid phase microextraction of amitriptyline, imipramine and chlorpromazine from human plasma by using an indole-thiophene copolymer nanocomposite. Microchim. Acta, 2017, 184, 2473-2481.
[129]
Gopi, D.; Saraswathy, R.; Kavitha, L.; Kim, D. Electrochemical synthesis of poly (indole-co-thiophene) on low-nickel stainless steel and its anticorrosive performance in 0.5 mol L−1 H2SO4. Polym. Int., 2014, 63, 280-289.
[130]
Shamsayei, M.; Yamini, Y.; Asiabi, H. Polythiophene/graphene oxide nanostructured electrodeposited coating for on-line electrochemically controlled in-tube solid-phase microextraction. J. Chromatogr. A, 2016, 1475, 8-17.
[131]
Wang, S.L.; Xu, H. Inorganic-organic hybrid coating material for the online in-tube solid-phase microextraction of monohydroxy polycyclic aromatic hydrocarbons in urine. J. Sep. Sci., 2016, 39(23), 4610-4620.
[132]
Zhang, S.W.; Zou, C.J.; Luo, N.; Weng, Q.F.; Cai, L.S.; Wu, C.Y.; Xin, J. Determination of urinary 8-hydroxy-20-deoxyguanosine by capillary electrophoresis with molecularly imprinted monolith in-tube solid phase microextraction. Chin. Chem. Lett., 2010, 21, 85-88.
[133]
Liu, X.; Wang, X.; Tan, F.; Zhao, H.; Quan, X.; Chen, J.; Li, L. An electrochemically enhanced solid-phase microextraction approach based on molecularly imprinted polypyrrole/multi-walled carbon nanotubes composite coating for selective extraction of fluoroquinolones in aqueous samples. Anal. Chim. Acta, 2012, 727, 26-33.
[134]
Ameli, A.; Alizadeh, N. Nanostructured conducting molecularly imprinted polymer for selective extraction of salicylate from urine and serum samples by electrochemically controlled solid-phase micro-extraction. Anal. Chim. Acta, 2011, 707, 62-68.
[135]
Abdolhosseini, S.; Ghiasvand, A.R.; Heidari, N. Comparison of the conventional and electroenhanced direct-immersion solid-phase microextraction for sampling of nicotine in biological fluids of the human body. Molecules, 2018, 23, 1171.
[136]
Zeng, J.; Zou, J.; Song, X.; Chen, J.; Ji, J.; Wang, B.; Wang, Y.; Ha, J.; Chen, X. A new strategy for basic drug extraction in aqueous medium using electrochemically enhanced solid-phase microextraction. J. Chromatogr. A, 2011, 1218, 191-196.
[137]
Hosseiny, S.S.; Nojavan, D.S.; Asadi, R.; Banitaba, M.H. Electro-assisted solid-phase microextraction based on poly(3,4-ethylenedioxythiophen) combined with GC for the quantification of tricyclic antidepressants. J. Sep. Sci., 2013, 36, 2315-2322.
[138]
Ebrahimzadeh, H.; Mehdinia, A.; Kamarei, F.; Moradi, E. A sensitive method for the determination of methadone in biological samples using nano-structured a-carboxy polypyrrol as a sorbent of SPME. Chromatographia, 2012, 75, 149-155.
[139]
Jafari, M.; Sedghi, R.; Ebrahimzadeh, H. A platinum wire coated with a composite consisting of polypyrrole and poly(ɛ-caprolactone) for solid phase microextraction of the antidepressant imipramine prior to its determination via ion mobility spectrometry. Microchim. Acta, 2016, 183, 805-812.
[140]
Ghiasvand, A.; Heidari, N.; Abdolhosseini, S. Iron oxide/silica/polypyrrole nanocomposite sorbent for the comparison study of direct-immersion and headspace solid-phase microextraction of aldehyde biomarkers in human urine. J. Pharm. Biomed. Anal., 2018, 159, 37-44.
Article Metrics
38
2