Generic placeholder image

Recent Innovations in Chemical Engineering

Editor-in-Chief

ISSN (Print): 2405-5204
ISSN (Online): 2405-5212

Research Article

Using a 3-Steps Supercritical Fluids Assisted Process for the Generation of Nanostructured Biopolymeric Scaffolds

Author(s): Stefano Cardea*

Volume 12, Issue 1, 2019

Page: [7 - 14] Pages: 8

DOI: 10.2174/2405520412666181126145617

Price: $65

Abstract

Background: Scaffolds can be used to substitute the extracellular matrix and to favour the generation of tissues and organs. Until now, various processes have been implemented for scaffolds generation, but they are characterized by several limits.

Methods: In this work, we tested a supercritical fluids assisted process for the generation of nano-structured biopolymeric scaffolds; it is characterized by three steps: generation of a polymeric gel (loaded with a porogen), drying of the gel using supercritical CO2, waterwashing to remove the porogen.

Results: 3D Poly(D,L-lactic acid) scaffolds have been obtained, characterized by very high porosity (> 90%) and surface are (> 200 m2/g), and by a fibrous nanostructure (fibres ranging between 60 and 400 nm) superimposed to a micrometric cellular structure.

Conclusion: Moreover, suitable mechanical properties (up to 125 KPa) and very low solvents residue (< 5 ppm) have been obtained.

Keywords: Scaffolds, supercritical fluids, Poly(D, L-lactic acid), nanostructure, tissue engineering, biocompatible polymeric scaffolds.

Graphical Abstract

[1]
Langer R, Vacanti JP. Tissue engineering. Science 1993; 260(5110): 920-6.
[2]
Ma PX. Scaffold for tissue fabrication. Mater Today 2004; 7(5): 30-40.
[3]
O’Brien FJ, Harley BA, Yannas IV, Gibson LJ. The effect of pore size on cell adhesion in collagen-GAG scaffolds. Biomaterials 2005; 26(4): 433-41.
[4]
Hutmacher DW. Scaffolds in tissue engineering bone and cartilage. Biomaterials 2000; 21(24): 2529-43.
[5]
Liu X, Ma PX. Polymeric scaffolds for bone tissue engineering. Ann Biomed Eng 2004; 32(3): 477-86.
[6]
Quirk RA, France RM, Shakesheff KM, Howdle SM. Supercritical fluid technologies and tissue engineering scaffolds. Curr Opin Solid State Mater Sci 2004; 8(3-4): 313-21.
[7]
Mooney DJ, Baldwin DF, Suh NP, Vacanti JP, Langer R. Novel approach to fabricate porous sponges of (D, L-lactic-co-glycolic acid) without the use of organic solvents. Biomaterials 1996; 17(14): 1417-22.
[8]
Mooney DJ, Kim BS, Harris LD. Open pore biodegradable matrices formed with gas foaming. J Biomed Mater Res 1998; 42(3): 396-402.
[9]
Leong KF, Cheah CM, Chua CK. Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs. Biomaterials 2003; 24(13): 2363-78.
[10]
Kho YW, Kalika DS, Knutson BL. Precipitation of nylon 6 membranes using compressed carbon dioxide. Polymer 2001; 42(14): 6119.
[11]
Matsuyama H, Yamamoto A, Yano H. etal. Formation of porous flat membrane by phase separation with supercritical CO2. J Membr Sci 2001; 194(2): 157-63.
[12]
Matsuyama H, Yamamoto A, Yano H. etal. Effect of organic solvents on membrane formation by phase separation with supercritical CO2. J Membr Sci 2002; 204(1-2): 81-7.
[13]
Reverchon E, Cardea S, Rapuano C. Formation of poly-vinyl-alcohol structures by supercritical CO2. J Appl Polym Sci 2007; 104(5): 3151-60.
[14]
Cardea S, Sessa M, Reverchon E. Supercritical phase inversion to form drug-loaded poly (vinylidene fluoride-co-hexafluoropropylene) membranes. Ind Eng Chem Res 2010; 49(6): 2783-9.
[15]
Xu Q, Pang M, Peng Q, Li J, Jiang Y. Application of supercritical carbon dioxide in the preparation of biodegradable polylactide membranes. J Appl Polym Sci 2004; 94(5): 2158-63.
[16]
Xu Q, Pang M, Peng Q. etal. Effect of different experimental conditions on biodegradable polylactide membranes prepared with supercritical CO2 as nonsolvent. J Appl Polym Sci 2005; 98(2): 831-7.
[17]
Daniel C, Longo S, Cardea S, Vitillo JG, Guerra G. Monolithic nanoporous-crystalline aerogels based on PPO. RSC Advances 2012; 2(31): 12011-8.
[18]
Tsivintzelis I, Pavlidou E, Panayiotou C. Porous scaffolds prepared by phase inversion using supercritical CO2 as antisolvent: I. Poly (l-lactic acid). J Supercrit Fluids 2006; 40(2): 317-22.
[19]
Baldino L, Naddeo F, Cardea S, Naddeo A, Reverchon E. FEM modeling of the reinforcement mechanism of hydroxyapatite in PDLA scaffolds produced by supercritical drying, for tissue engineering applications. J Mech Behav Biomed Mater 2015; 51: 225.
[20]
Baldino L, Concilio S, Cardea S, De Marco I, Reverchon E. Complete glutaraldehyde elimination during chitosan hydrogel drying by SC-CO2 processing. J Supercrit Fluids 215; 103: 70.
[21]
Schugens C, Maquet V, Grandfils C, Jerome R, Teyssie P. Polylactide macroporous biodegradable implants for cell transplantation. II Preparation of polylactide foams by liquid-liquid phase separation. J Biomed Mater Res 1996; 30(4): 449-61.
[22]
Nam YS, Park TG. Porous biodegradable polymeric scaffolds prepared by thermally induced phase separation. J Biomed Mater Res 1999; 47: 8-17.
[23]
Zhang R, Ma PX. Synthetic nano-fibrillar extracellular matrices with predesigned macroporous architectures. J Biomed Mater Res 2000; 52(2): 430-8.
[24]
Woo MK, Chen VJ, Ma PX. Nano-fibrous scaffolding architecture selectively enhances protein adsorption contributing to cell attachment. J Biomed Mat Res Part. A 2003; 67(2): 531-7.
[25]
Daniel C, Alfano D, Venditto V. etal. Aerogels with a microporous crystalline host phase. Adv Mater 2005; 17(12): 1515-8.
[26]
Brunner G. Gas Extraction in: Steinkopff Darkmstadt. New York: Springer 1994.
[27]
Reverchon E, Cardea S. Production of controlled polymeric foams by supercritical CO2. J Supercrit Fluids 2007; 40: 144-52.
[28]
Chen VJ, Ma PX. Nano-fibrous poly (L-lactic acid) scaffolds with interconnected spherical macropores. Biomaterials 2004; 25(11): 2065-73.
[29]
Wei G, Ma PX. Macroporous and nanofibrous polymer scaffolds and polymer/bone-like apatite composite scaffolds generated by sugar spheres. J Biomed Mater Res Part A 2006; 78(2): 306-15.
[30]
Ma PX, Zhang R. Synthetic nano-scale fibrous extracellular matrix. J Biomed Mater Res 1999; 46: 60-72.
[31]
Liu X, Won Y, Ma PX. Porogen-induced surface modification of nano-fibrous poly(L-lactic acid) scaffolds for tissue engineering. Biomaterials 2006; 27(21): 3980-7.
[32]
Zhang J, Zhang H, Wu L, Ding J. Fabrication of three dimensional polymeric scaffolds with spherical pores. J Mater Sci 2006; 41(6): 1725-31.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy