Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Research Article

LQG Controller for the Control of Active and Reactive Power of DFIG Operating Under Inter-turn Short Circuit Fault

Author(s): Selam Karim*, Allaoui Tayeb and Tadjine Mohamed

Volume 13, Issue 3, 2020

Page: [340 - 347] Pages: 8

DOI: 10.2174/2352096511666181114120443

Price: $65

Abstract

Objective: This article presents a comparative study between the direct control for a Doubly- Fed Induction Generator (DFIG) in the healthy and faulty mode.

Methods: First with classical IP controller then Linear Quadratic Gaussian (LQG) controller which propose an ensemble of Linear Quadratic Regulator and Kalman filter for the state estimation. The developed model of the machine allows the simulation of the inter-turn short circuit in the stator. The use of the LQG method provides very good performance for motor operation and robustness of the control law despite the external perturbation. The performance of the control is compared to a classical controller's PI.

Results: The obtained results demonstrate that this type of controller allows the alleviation of the mechanical stress and it ensures good performances under fault, the continuity of this system is ensured.

Conclusion: The simulation has been carried out using a MATLAB script and the results are presented.

Keywords: Doubly Fed Induction Generator (DFIG), power control, LQG controller, double flux orientation control, Kalman filter, short circuit fault.

Graphical Abstract

[1]
X. Yao, S. Liu, G. Shan, Z. Xing, C-C. Guo, and C. Yi, "LQG controller for a variable speed pitch regulated wind turbine", Int. Conf. Intell. Human-Mach. Syst. Cybernet., vol. 2, pp. 210-213, 2009.
[2]
Y. Bekakra, and D. Ben Attous, "Direct control of doubly fed induction generator fed by PWM converter with a variable structure control based on a sliding mode control", Int. J. Syst. Assur. Eng. Manag., vol. 5, no. 3, pp. 213-218, 2014.
[http://dx.doi.org/10.1007/s13198-013- 0147-8]
[3]
S.K.E. Khil, I. S.-Belkhodja, M. P.-David, and B. de Fornel, “A fault tolerant operating system in a doubly fed induction machine under inverter short-circuit faults., IECON IEEE Indust. Electron, pp. 1125-1130. 2006
[4]
E.B. Muhando, T. Senjyu, A. Uehara, T. Funabashi, and C. Kim, "“LQG design for Megawatt-Class WECS with DFIG based on functional models”, Fidelity Prerequisites", IEEE J. Magaz., vol. 24, no. 4, pp. 893-904, 2009.
[5]
Y. Xingjia, G. Changchun, X. Zuoxia, Yan. Li, L, Shu, and W. Xiaodong, "“Pitch Regulated LQG Controller Design for Vari-able Speed Wind Turbine", Int. Conf. Mechatron. Automat., pp. 845-849, 2009.
[6]
A. Yazidi, H. Henao, G.A. Capolino, L. Capocchi, and D. Federici, "Double-fed three-phase induction machine model for simulation of interturn short circuit fault", IEEE Int. Electric Mach. Drives Conf., pp. 571-576, 2009.
[7]
A. Pintea, N. Christov, D. Popescu, and P. Borne, "LQG control of horizontal wind turbines for blades and tower loads alleviation", FAC Proceedings, vol. 44, no. 1, pp. 1721-1726, 2011.
[8]
M. Debbou, and M. Pietrzak-David, "Novel tolerant fault DFIM drive for naval propulsion", IEEE Conferences, pp. 3006-3011, 2013.
[9]
B. Hamane, M.L. Doumbia, A.M. Bouhamida, and M. Benghanem, "Direct active and reactive power control of DFIG based WECS using PI and sliding mode controllers", IECON Annual Conference of the IEEE Industrial Electronics, pp. 2050-2055, 2014.
[10]
B. Boujoudi, N. Machkour, and E. Kheddioui, “Comparative study between PI and the sliding mode control for the DFIG of a wind turbine”International Multi-Conference on Systems, Signals & Devices., SSD, pp. 49-58. 2017
[11]
R.B. Cardenasa, and M. Molinasa, "Optimal LQG controller for variable speed wind turbine based on genetic algorithms", Energy Procedia, vol. 20, pp. 207-216, 2012.
[12]
Y. Xingjia, G. Changchun, X. Zuoxia, Y. Li, L. Shu, and W. Xiaodong, "Pitch regulated LQG controller design for variable speed wind turbine", International Conference on Mechatronics and Automation, pp. 845-849, 2009.
[13]
A. Benachour, E.M. Berkouk, and M.O. Mahmoudi, "Study and comparison between two DTC strategies of induction machine fed by direct matrix converter", J. Renew. Sustain. Energy, vol. 9, no. 5, . 055501 2017
[http://dx.doi.org/10.1063/1.5002769]
[14]
E.B. Muhando, T. Senjyu, E. Omine, and T. Funabashi, "Full statefeedback digital control of WECS with state es-timation by stochastic modeling design", In: 2008 IEEE Power and Energy Society General Meeting - Conversion and Delivery of Electrical Energy in the 21st Century, Pittsburgh, PA, USA, 2008, pp. 1-8.
[15]
S. Kanev, and M. Verhaegen, "A bank of reconfigurable LQG controllers for linear systems subjected to failures", In: Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187), Sydney, NSW, Australia, vol. 4. 2000, pp. 3684-3689.
[http://dx.doi.org/10.1109/CDC.2000.912282]
[16]
S.K. El Khil, I.S. Belkhodja, M.P. David, and B. de Fornel, A fault tolerant operating system in a doubly fed induction machine under inverter short-circuit faults., IECON IEEE Industrial Electron, pp. 1125-1130. 2006
[17]
A. Luna, F. Kleber, D. Santos, P. Rodríguez, E.H. Watanabe, and S. Arnaltes, "Simplified modeling of a DFIG for transient studies in wind power applications", IEEE Transact. Indust., vol. 58, no. 1, pp. 9-20, 2011.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy