[1]
D. Schmidt, and K. Berns, "Climbing robots for maintenance and inspections of vertical structures—A survey of design aspects and technologies", Robot. Auton. Syst., vol. 61, pp. 1288-1305, 2013.
[2]
B.S. Chu, K.M. Jung, and C.S. Han, "A survey of climbing robots locomotion and adhesion", Int. J. Precis. Eng. Manuf., vol. 11, pp. 633-647, 2010.
[3]
S. Panich, "Development of wall climbing robot", J. Comput. Sci., vol. 6, pp. 1156-1159, 2010.
[4]
A. Ariga, T. Kobayashi, T. Yamaguchi, and S. Hashimoto, Wall climbing robot in narrow space with pantograph-type structure2010 IEEE International Conference on Robotics and Biomimetics, Tianjin, 2010, pp. 1507-1512.
[5]
K. Ioi, H. Yokoi, and M. Kimura, "Development of a compact and rapid wall-climber", Proceedings of 2013 IEEE MMAR,. 2013, pp. 344-349.
[6]
M.T. Pope, C.W. Kimes, H. Jiang, E.W. Hawkes, M.A. Estrada, and C.F. Kerst, "A multimodal robot for perching and climbing on vertical outdoor surfaces", IEEE Trans. Robot., vol. 33, pp. 35-48, 2017.
[7]
K. Seo, S. Cho, T. Kim, H.S. Kim, and J. Kim, "Design and stability analysis of a novel wall climbing robotic platform", Mech Mach. Theory, vol. 70, pp. 189-208, 2013.
[8]
S. Wu, L. Wu, and T. Liu, Design of a sliding wall climbing robot with a novel negative adsorption deviceInternational Conference on Ubiquitous Robots and Ambient Intelligence, Nov. 23–26, 2011, pp. 97-100.
[9]
D. Guan, L. Yan, Y.B. Yang, and W.F. Xu, "A small climbing robot for the intelligent inspection of nuclear power plants", 4th IEEE Int. Conf. Inf. Sci. Technol., 2014
[10]
M.M. Moniri, M. Bamdad, and A. Hajizadeh, A novel mechatronic design of wall climbing robot for steel storage tank inspection2015 16th International Conference on Research and Education in Mechatronics, Bochum, 2015, pp. 1-6.
[11]
D. Lee, T. Seo, and J. Kim, "Optimal design and workspace analysis of a mobile welding robot with a 3P3R serial manipulator", Robot. Auton. Syst., vol. 59, pp. 813-826, 2011.
[12]
P. Sekhar, and R.S. Bhooshan, "Duct fan based wall climbing robot for concrete surface crack inspection", IEEE India Conf., 2014
[13]
M.D.O. Faruq Howlader, and T.P. Sattar,, "Novel adhesion mechanism and design parameters for concrete wall-climbing robot", 2015 SAI Intelligent Systems ConferenceLondon, . 2015, pp. 267- 273.
[14]
D. Cui, Y. Lei, Y. Mu, and D. Cui, Safety analysis of a climbing robot with dual pumps for building surface detection2016 IEEE International Conference on Mechatronics and Automation, Harbin, 2016, pp. 508-513.
[15]
D.Q. Cui, D. Chen, H. Dong, L. Zhang, F. Qi, Y. Lei, and X. Gao, "Design and analysis of climbing robot based on Construction Surface Inspection", 28th Chinese Control and Decision Conference, 2016
[16]
K. Wang, R. Liu, and Y. Qu, "Development of a double-cavity climbing robot for on-site inspection of glass-curtain-walls", IEEE Int. Conf. Inf. Autom, 2013pp. 1183-1188
[17]
R. Liang, R. Liu, C.H.W. Yang, and K. Wang, "Design, modeling and analysis of a climbing robot used for inspection of glass curtain walls", IEEE Int. Conf. Robot Biomimetics, December 2013
[18]
L. Yangí, G. Yang, Z. Liu, Y. Chang, B. Jiang, Y. Awad, and J. Xiao,, Wall-climbing robot for visual and GPR inspection2018 13th IEEE Conference on Industrial Electronics and Applications, Wuhan, 2018, pp. 1004-1009.
[19]
W. Myeong, K. Jung, S. Jung, Y. Jeong, and H. Myung, "Development of a drone-type wall-sticking and climbing robot", Proc. of Int’l Conf. on Ubiquitous Robots and Ambient Intelligence, 2015
[20]
X.J. Zhou, and X.Y. Liu, The optimization design of adsorption structure using in large oil tank climbing robot Mach. Desi. Manuf, pp. 181-184, 2014.
[21]
C. Wang, H. Li, and R. Wang, Study of the wall-climbing robot for hull painting2010 International Conference on E-Product E-Service and E-Entertainment, Henan, 2010, pp. 1-4.
[22]
Y. Li, Z. Yi, Y. Lin, Z. Ji, X. Jiang, F. Pei, and B. Li,, The basic functional design of wall climbing robot for hull plate spraying in dock2017 2nd International Conference on Robotics and Automation Engineering, Shanghai, 2017, pp. 89-93.
[23]
S.C. Han, J.H. Kim, S.K. Lee, and J.H. Kim, "Design and experiment of automatic painting robot using permanent magnet mobile robot in ship cargo tank", J. Korea Academia Ind., vol. 12, pp. 5550-5456, 2011.
[24]
C.S. Cho, J.D. Kim, S.G. Lee, S.K. Lee, S.C. Han, and B.S. Kim,, A study on automated mobile painting robot with permanent magnet wheels for outer plate of ship IEEE 44th International Symposium on Robotics, pp. 1-4. 2014
[25]
Z.Y. Yi, Y.J. Gong, Z.W. Wang, and X.R. Wangl., "“Wall-attachment model and its simulation on a new wall-climbing robot for rust removal”, J. Sichuan", Univ., vol. 43, pp. 211-216, 2011.
[26]
E. Markus, and V. Thomas, Design and control of a lightweight magnetic climbing robot for vessel inspectionIEEE 19th Mediterranean Conference on Control and Automation, Corfu, pp. 1200-1205. 2011
[27]
M.G. Alkalla, M.A. Fanni, and A. Mohamed, Versatile climbing robot for vessels inspection2015 International Conference on Control, Automation and Robotics, Singapore, 2015, pp. 18-23.
[28]
Zh.Y. Yi, Y.J. Gong, Z.W. Wang, and X.R. Wang, "Dynamic modeling and analysis on a new type wall-climbing robot for ship wall rust removal", J. Mech. Eng., vol. 46, pp. 23-30, 2010.
[29]
Y. Wang, and X. Chao, The Study of Wall Climbing Robot for Removal Rust in VesselsSouth China Univ. Technol, Guangzhou, 2016.
[30]
M.G. Alkalla, M.A. Fanni, and A.F. Mohamed, "Versatile Climbing Robot for Vessels Inspection", International Conference on Control, Automation and Robotics, pp. 18-23 2015
[31]
J. Xu, L. Xu, J. Liu, X. Li, and X. Wu, Survey on bioinspired adhesive methods and design and implementation of a multi-mode biomimetic wall-climbing robot2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland, New Zealand, 2018, pp. 688-693.
[32]
S. Sano, K. Ohara, S. Ashizawa, A. Ichikawa, S. Suzuki, T. Omichi, and T. Fukuda,, Development of wall climbing robot using passive joint and vacuum pad on rough surface2017 International Symposium on Micro-Nano Mechatronics and Human Science, Nagoya, 2017, pp. 1-3.
[33]
M. Wu, G. Pan, T. Zhang, S. Chen, F. Zhuang, and Z. Zheng,., "Design and optimal research of a non-contact adjustable magnetic adhesion mechanism for a wall climbing welding robot", Int. J. Adv. Robot. Syst., vol. 10, p. 1, 2013.
[34]
S. Wu, G. Zheng, T. Liu, and B. Wang, A magnetic wall climbing robot with non-contactable and adjustable adhesion mechanism2017 IEEE International Conference on Real-time Computing and Robotics, Okinawa, 2017, pp. 427-430.
[35]
Y. Sh, "Yu, and S. G. Ma, “Design of a Wall-Climbing Robot with Passive Suction Cups", 2010 IEEE Int. Conf. Robot. Biomimetics, pp. 1513-1518 2010
[36]
H. Ishihara, "Basic study on wall climbing robot with magnetic passive wheels", Proc. IEEE International Conference on Mechatronics and Automation, pp. 1964-1969 2017
[37]
J. Cai, K. He, H. Fang, H. Chen, S. Hu, and W. Zhou, The design of permanent-magnetic wheeled wall-climbing robot2017 IEEE International Conference on Information and Automation, Macau, 2017, pp. 604-608.
[38]
F.J. Hu, H. Kong, S.F. Han, and J.X. Liu, "Design and research of the wall-climbing robot based on permanent magnet adsorption", Manuf. Auton., pp. 150-152, 2015.
[39]
X. Wu, D. Wang, A. Zhao, D. Li, and T. Mei, “A wall-climbing robot with biomimetic adhesive pedrail”, Adv. Mechatron. MEMS Devi., Springer New York, pp. 179-191. 2013
[40]
J. Koh, S. An, and K. Cho, , Finger-sized climbing robot using artificial proleg2010 3rd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics, Tokyo, 2010, pp. 610-615.
[41]
L.P. Pratap, P.M. Shailendrasingh, A. Anand, and V.P. Tharun, Wall climbing robot using soft robotics2017 IEEE International Conference on Power, Control, Signals and Instrumentation Engineering, Chennai, 2017, pp. 1860-1864.
[42]
Y. Liu, S. Sun, X. Wu, T. Mei,, "A wheeled wall climbing robot with bio-inspired spine mechanisms", J. Bionics Eng., vol. 12, pp. 17-28, 2015.
[43]
T. Yamaguchi, T. Amakawa, T. Wu, N. Fan, K. Li, and K. Kikuchi, "Development of negative pressure suction mechanism in omnidirectional wall-climbing robot for inspection of airplanes", Proceedings of the 19th International Conference on Climbing and Walking Robots and Support Technologies for Mobile Machines, pp. 106-114 2016
[44]
J. Xiao, and B. Li, "Rise-rover: a wall-climbing robot with high reliability and load-carrying capacity in assistive robotics", Proceedings of the 18th International Conference on Climbing and Walking Robots and Support Technologies for Mobile Machines, p. 299 2015
[45]
Y.F. Geng, "A wall climbing robot with adjustable stride", CN Patent 106,741,274 A,, 2017.
[46]
R. S. Liu, Q. Wang, R. Zhang, K. Liu, and X. T. Ye, "A four-link glass cleaning robot", CN Patent 106,913,277A, 2017.
[47]
J.Y. Guo, C.Q. Wang, Y. Xie, L.F. Wu, and F. Jia, "A robot that can crawl on the curved surface", CN Patent 106,240,668 A, 2016.
[48]
H. Yang, Y.F. Zhang, W.P. Kong, and H. Yu, "A curtain wall cleaning robot", CN Patent 107,307,800 A, 2017.
[49]
H. Qiao, "A pneumatic glass curtain cleaning robot", CNPatent 205,612,412 U, 2016.
[50]
G.L. Mu, "A multifunctional cleaning robot located by helicopter", CN Patent 206,507,903 U, 2017.
[51]
M. Cao, Z.T. Zhou, and H.J. Yao, "An outdoor wall cleaning robot", CN Patent 107,252,291 A, 2017.
[52]
L.B. Liu, X.J. Tian, G.F. Zhang, S.Y. Liu, P.Y. Zhang, and H.W. Jing, "An external wall cleaning robot that can cross the obstacle", CNPatent 106,725,141 A, 2017.
[53]
W. Wang, Z.H. Chen, T. Fang, M.X. Jiang, and H.L. Wang, "A wall cleaning robot", CN Patent 205,836,999 U, 2016.
[54]
G.L. Mu, "A multifunctional wall cleaning robot", CN Patent 205,286,252 U, 2016.
[55]
G.L. Mu, "An outdoor wall cleaning robot with manipulator", CN Patent 206,510,041 U, 2017.
[56]
C.X. Zhao, S. Zhang, X. Yuan, Z.M. Tang, J.P. Jiang, and C.T. Su, "A wall climbing robot with combined wheel-leg", CN Patent 106,945,740 A, 2017.
[57]
X. Li, "Climbing robot vehicle", U.S. Patent 9,738,337 B2, 2017.
[58]
Q. Wang, and W.P. Wang, "A robot that can crawl on the surface", CN Patent 205,930,982 U, 2017.
[59]
Y.R. Song, G.R. Fei, Q.T. Dai, and G.Q. Huang, "A wall-climbing robot with three legs", CN Patent 107,380,292 A, 2017.
[60]
Z.Z. Wan, J.Q. Ma, Ch. Fei, W. Li, Y. Zhang, D. Liu, J.J. Song, and Y.L. Yue, "An intelligent wall cleaning robot", CN Patent 205,817,841 U, 2016.
[61]
A. Niederberger, "Mobile climbing robot and service system having a climbing robot", U.S. Patent 8,534,395 B2, 2013.
[62]
L.Y. Shen, X.L. Li, Zh. Zhang, W. Song, and S.G. Xiao, "A wall climbing robot that can cross the barrier", CN Patent 106,945,739 A, 2017.
[63]
X.H. Sang, Y.G. Song, X.T. Ding, P.C. Hu, and F. Yang, "A wall climbing robot that can cross the barrier", CN Patent 106,828,648 A, 2017.
[64]
C.H.Z.H. Liu, "Wall-climbing robot capable of surmounting and treading on obstacles", WO Patent 2018/095,250 A1, 2018.
[65]
Zh.Q. Zhu, and Y.H. Xiong, "Development of a Passive Vacuum Adsorption and Walking Device for Climbing Wall Robot", Machinery, vol. 44, pp. 40-42, 2017.
[66]
G.Q. Huang, B.H. Sun, Sh. Li, and J.L. Wen, "A track-legged wall climbing robot", CN Patent 106,904,224 A,, 2017.
[67]
Y. Liu, S. Sun, X. Wu, and T. Mei,, "A wheeled wall-climbing robot with bio-Inspired spine mechanisms", J. Bionics Eng., vol. 12, pp. 17-28, 2015.
[68]
N. Andriani, M.D. Maulida, Y. Aniroh, and M.F. Alfafa,, "Pressure control of a wheeled wall climbing robot using proporsional controller", International Conference on Information & Communication Technology and Systems, 2017pp. 124-128
[69]
T. Go, T. Osawa, T. Ogawa, and T. Nakamura, "Development of traveling wave type omnidirectional wall climbing robot using permanent magnetic adhesion mechanism and proposal of locomotion strategy for the robot", Proc. 2014 IEEE/ASME Int Conf Adv. Intel Mechatron , pp. 1000-1010 2014
[70]
Z. Bi, Y. Guan, S. Chen, H. Zhu, and H. Zhang, "A miniature biped wall-climbing robot for inspection of magnetic metal surfaces", 2012 IEEE International Conference on Robotics and Biomimetics, pp. 324-329 2012
[71]
Y. Guan, H. Zhu, W. Wu, X. Zhou, L. Jiang, C. Cai, L. Zhang, and H. Zhang, "A modular biped wall-climbing robot with high mobility and manipulating function", IEEE/ASME Trans. Mechatron., vol. 18, pp. 1787-1798, 2013.
[72]
S.R. Kamalakannan, and R. Ambigai, Analysis of modular biped wall climbing robot with high mobility and effective transit mechanism2017 International Conference on Computer, Communication and Signal Processing, Chennai, 2017, pp. 1-6.
[73]
J. Shen, and Y. Liu, Design and analysis of an obstacle-crossing wall-climbing robot mechanism2015 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems, Shenyang, 2015, pp. 2067-2072.
[74]
D. Kim, H. Hong, H.S. Kim, and J. Kim, "Optimal design and kinetic analysis of a stair-climbing mobile robot with rocker-bogie mechanism", Mechan Mach. Theory, vol. 50, pp. 90-108, 2012.
[75]
K. Ioi, Y. Shimizu, and M. Kimura, Experiments and simulations of wall running and transferring of a climbing robot2015 International Symposium on Innovations in Intelligent Systems and Applications, Madrid, 2015, pp. 1-7.
[76]
Y. Shimizu, Y. Ida, K. Nozaki, and K. Ioi, "Running and Transfering of a Small Mobile Robot on Walls", Proceedings of, vol. SI2014, pp. 1370-1374, 2014.
[77]
Y. Zhang, Y. Zhang, X. Wu, and T. Mei, Design and experiment of a tank-like wall-climbing robot using fibril dry adhesives2016 IEEE International Conference on Mechatronics and Automation, Harbin, 2016, pp. 671-676.
[78]
T. Seo, and M. Sitti, "Under-actuated tank-like climbing robot with various transitioning capabilities", Proceedings of 2011 IEEE International Conference on Robotics and Automation, 2011pp. 777-782
[79]
T. Seo, and M. Sitti, "Tank-like module-based climbing robot using passive compliant joints", IEEE/ASME Trans. Mechatron., vol. 18, pp. 397-408, Feb 2013.
[80]
K. Sukvichai, P. Maolanon, and K. Songkrasin, Design of a double-propellers wall-climbing robot 2017 IEEE International Conference on Robotics and Biomimetics, Macau, 2017, pp. 239-245.
[81]
I.M. Koo, T.D. Trong, Y.H. Lee, H. Moon, J. Koo, S.K. Park, and H.R. Choi, "Development of wall climbing robot system by using impeller type adhesion mechanism", J. Intell. Robot. Syst., vol. 72, pp. 57-72, 2013.
[82]
D. Ge, C. Ren, T. Matsuno, and S. Ma, Guide rail design for a passive suction cup based wall-climbing robot2016 IEEE/RSJ International Conference on Intelligent Robots and Systems, Daejeon, 2016, pp. 5776-5781.
[83]
Y. Yoshida, and S. Ma, "A wall-climbing robot without any active suction mechanisms", Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011pp. 2014-2019
[84]
Y. Yoshida, and S. Ma, "Design of a wall-climbing robot with passive suction cups", Proceedings of the 2010 IEEE International Conference on Robotics and Biomimetics, 2010pp. 1513-1518
[85]
V. Chashchukhin, D. Knyazkov, M. Knyazkov, and A. Nunuparov, Determining orientation of the aerodynamically adhesive wall climbing robot2017 22nd International Conference on Methods and Models in Automation and Robotics, Miedzyzdroje, 2017, pp. 1033-1038.
[86]
V.G. Gradetsky, and V.G. Chashchukhin, Mechanics of crawling robot with sliding seal., Adaptive Mobile Robotics, pp. 577-584. 2015
[87]
A. Fallah, M. Rezasoltani, A. Riasi, and H. Moradi, "Numerical Analysis of a Non-Contact Surface Adhesion System based on Vortex Cup for Wall Climbing Robots", RSI/ISM Int. Conf. Robot. Mechatronics, 2013pp. 368-373
[88]
Y. Liu, Q. Dai, and Q. Liu, "Adhesion-adaptive control of a novel bridge-climbing robot", IEEE Int. Conf. Cyber Technol. Autom. Control Intell. Syst., 2013pp. 102-107
[89]
J.H. Zhao, and X. Li, "Development of wall-climbing robot using vortex suction unit and its evaluation on walls with various surface conditions", Proc. International Conference on Intelligent Robotics and Applications, 2017pp. 179-192
[90]
Y. Tanaka, K. Nozaki, and K. Ioi, Motion control of a wall climbing robot with coaxial propeller thruster2017 2nd IEEE International Conference on Intelligent Transportation Engineering, Singapore, 2017, pp. 360-364.
[91]
A. Saito, K. Nagayama, and K. Ito, "Semi-Autonomous Multi-Legged Robot with Suckers to Climb a Wall", J. Robot. Mechatron., vol. 30, pp. 24-32, 2018.
[92]
C.H. Liu, M.H. Lin, and Y.C. Huang, The development of a multi-legged robot using eight-bar linkages as leg mechanisms with switchable modes for walking and stair climbingInternational Conference on Control, Automation and Robotics, IEEE, 2017, pp. 103-108.
[93]
Z. Zhu, "Mobile platform of miniature wall-climbing robot for building surface inspection", J. Mech. Eng, vol. 47, p. 49, 2011.
[94]
R. J. Johnson, and M. H. Suid, "Pressure control of wall climbing robot using pid controller", ARPN J. Eng. Appl. Sci., vol. 10, pp. 9825-9829, 2015.
[95]
C. Fan, Y. Zhang, W. Zhu, and H. Pan, A kind of wall-climbing robot based on wireless communication among multi-processors2016 Chinese Control and Decision Conference, Yinchuan, 2016, pp. 5320-5324.
[96]
S.W. Ryu, J.J. Park, S.M. Ryew, and H.R. Choi,, "Self-contained wall-climbing robot with closed link mechanism", Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems, 2011pp. 839-844
[97]
W. Myeong, S. Song, and H. Myung, Development of a wall-climbing drone with a rotary arm for climbing various-shaped surfaces2018 15th International Conference on Ubiquitous Robots, Honolulu, HI, USA, 2018, pp. 687-692.
[98]
Y. Liu, D. Lee, H. Kim, and T. Seo, Compliant Wall-Climbing Robotic Platform for Various CurvaturesIEEE/RSJ International Conference on Intelligent Robots and Systems, 2015, pp. 532-537.
[99]
Y. Liu, H. Kim, and T. Seo, "AnyClimb: A New Wall-Climbing Robotic Platform for Various Curvatures", IEEE/ASME Trans. Mechatron., vol. 21, pp. 1812-1821, 2016.
[100]
Y. Liu, M. Shin, and T. Seo, "Optimization design of dry adhesion for wall-climbing robot on various curvatures based on experiment", J. Korean Soc. Manuf. Technol., vol. 23, pp. 398-402, 2014.