Production of New Metal Coupled with Al Alloy Ni₃Al Composites Using Diffusion Welding

Title:Production of New Metal Coupled with Al Alloy Ni₃Al Composites Using Diffusion Welding

Volume: 4 Issue: 4

Author(s): Erdogan Karip, Mehtap Muratoglu and Sezgin Aydin

Affiliation:

Keywords: 2124Al, adhesion properties, diffusion welding, metal matrix composites, Ni3Al, T6.

Abstract: Joining characteristic of 2124 Al metal matrix composites (MMC’s) reinforced with Ni₃Al particulate using diffusion bonding process with 2124 Al, were investigated. In this research, the welding characteristic quality of the Ni₃Al/2124 Al MMC’s with 2124 Al was running to define the influence of Ni₃Al intermetallic particulates on bonding properties. The aging heat treatment also applied to some samples to observe the effects of the age hardening on adhesion properties. The tentative steps indicated that the applying age treatment after diffusion bonding increases Ni3Al particulate accumulation so, this event results in high concentration of Cu and Ni atoms at the composite interface. And also, increasing the weight fraction of Ni₃Al reinforcement in composite samples increases the effects of the aging heat treatment on diffusion bonding.

Cite this article as:

Karip Erdogan, Muratoglu Mehtap and Aydin Sezgin, Production of New Metal Coupled with Al Alloy Ni₃Al Composites Using Diffusion Welding, Current Physical Chemistry 2014; 4 (4) . https://dx.doi.org/10.2174/1877946805666150715180301

DOI https://dx.doi.org/10.2174/1877946805666150715180301	Print ISSN 1877-9468
Publisher Name Bentham Science Publisher	Online ISSN 1877-9476