Generic placeholder image

Recent Innovations in Chemical Engineering

Editor-in-Chief

ISSN (Print): 2405-5204
ISSN (Online): 2405-5212

Research Article

A Study on Fracture Propagation Law of CO2 Composite Fracturing in Shale Reservoir

Author(s): Liyang Song*, Jiwei Wang, Zhiyu Sun and Hu Guo

Volume 16, Issue 2, 2023

Published on: 01 June, 2023

Page: [99 - 118] Pages: 20

DOI: 10.2174/2405520416666230507211547

Price: $65

conference banner
Abstract

Background: In recent years, CO2 composite fracturing technology has been widely used in unconventional reservoirs. Compared to conventional hydraulic fracturing, CO2 fracturing can create complex fractures, replenish formation energy and reduce oil flow resistance. For shale oil reservoirs with natural fractures, CO2 composite fracturing can not only give full play to the advantages of complex fracture networks created by CO2 but also make use of water-based fracturing fluid to create long fractures with high conductivity.

Methods: Based on fracture fluid flow, stress interference, natural fracture description, and CO2 phase change equation, a CO2 composite fracture propagation model was established in this paper to simulate the effects of fracturing fluid type, CO2 proportion, construction scale, natural fracture development, fracturing fluid injection rate and other factors on the propagation morphology of CO2 injection fracture network in shale oil reservoirs.

Results: The results show that the water-based fracturing fluid is beneficial to the formation of long main fractures, but the overall complexity of the fracture network and the effective stimulated volume of the fracture network are significantly lower than that of CO2 fracturing. The application of the appropriate proportion of CO2 composite fracturing fluid can give full play to the comprehensive advantages of CO2 and water-based fracturing fluid and realize the full stimulation of the reservoir. CO2 fracturing in shale oil reservoirs with low principal stress difference and high natural fracture development extent can communicate natural fractures in a large range and form a complex fracture network. For shale oil reservoirs with natural fractures, a high fracturing fluid injection rate can significantly improve the complexity of the fracture network.

Conclusion: The CO2 composite fracturing technology is applied to horizontal wells in X shale reservoir, and the production after fracturing is significantly higher than that of offset wells, which can be applied in the same type of reservoir and has broad application prospects.

Graphical Abstract

[1]
Xue Y, Fan Z, Huan Y. Production increase technology and outlook of CO2 dry fracturing. Med Chem Res 2016; (11): 77-9.
[2]
Xin CAI. Complex fracture propagation model of supercritical CO2 fracturing in unconventional reservoirs. Duankuai Youqitian 2022; (29): 107-10.
[3]
Rogala A, Andrzej R, Jan K, Maciej B, Jan H. Non-aqueous fracturing technologies for shale gas recovery. Physicochem Probl Miner Proces 2013; 49(1): 313-22.
[4]
Bustos O, Chen Y, Stewart M, et al. Case study: Application of a viscoelastic surfactant-based CO2 compatible fracturing fluid in the frontier formation, big horn basin, wyoming; 2007 April 16-18; Denver, Colorado, U.S.A. Texas, United States: Rocky Mountain Oil & Gas Technology Symposium 2007.
[5]
Semmelbeck ME, Deupree WE, Vonplonski JK. Novel CO2 emulsified viscoelastic surfactant fracturing fluid system enables commercial production from bypassed pay in the olmos formation; 2006 May 15-17; Calgary, Alberta, Canada. Texas, United States: SPE Gas Technology Symposium 2006.
[6]
Gupta DVS, Bobier DM. The history and success of liquid CO2 and CO2/N2 fracturing system; 1998 March 15-18; Calgary, Alberta, Canada. Texas, United States: SPE Gas Technology Symposium 1998: SPE-40016-MS.
[7]
Wand H, Gensheng LI, Zhenguo HE, et al. Analysis of mechanisms of supercritical CO2 fracturing. Yantu Lixue 2018; 39(10): 3589-96.
[8]
Su J, Li F, Tong Z. Hydraulic fracture propagation behaviour and geometry under supercritical CO2 fracturing in shale reservoirs. Oil Gas Geol 2019; 40(3): 616-25.
[9]
Zuo L, Han H. Research on Fracture propagation mechanism and technology of carbon dioxide fracturing in shale ga. Drilling Prod Technol 2019; 40(3): 616-25.
[10]
Zhang J, Zhang G, Zou Y, et al. Numerical simulation on the fracture propagation laws of CO2 fracturing in tight reservoirs. Oil Drilling Prod Technol 2018; 40(3): 354-60.
[11]
Wang X, Wu J, Zhang J. Application of CO2 fracturing technology for terrestrial shale gas reservoirs. Nat Gas Ind 2014; 34(1): 64-7.
[12]
Lahann R, Mastalerz M, Rupp JA, Drobniak A. Influence of CO2 on New Albany Shale composition and pore structure. Int J Coal Geol 2013; 108: 2-9.
[http://dx.doi.org/10.1016/j.coal.2011.05.004]
[13]
Wang XZ, Sun X, et al. Progress and application of CO2 fracturing technology for unconventional oil and gas. Lithologic Reservoirs 2019; 31(2): 1-7.
[14]
Qin C, Jiang Y, Luo Y, Xian X, Liu H, Li Y. Effect of supercritical carbon dioxide treatment time, pressure, and temperature on shale water wettability. Energy Fuels 2017; 31(1): 493-503.
[http://dx.doi.org/10.1021/acs.energyfuels.6b03257]
[15]
Sun B, Sun W. Research progress and prospectives of supercritical CO2 thickening technology. J China Univ Petroleum: Edition Nat Sci 2015; 39(3): 76-83.
[16]
Zhenyun S, Weidong S, Yanzeng Y, et al. An experimental study on the CO2/sand dry-frac process. Nat Gas Ind B 2014; 1(2): 192-6.
[http://dx.doi.org/10.1016/j.ngib.2014.11.011]
[17]
Liu H, Wang F, Zhang J. Fracturing with carbon dioxide: Application and development trend. Petroleum Explorat Develop 2014; 41(4): 466-72.
[18]
Han LX. The success of experiment on sand fracturing with liquid carbon dioxide. Drilling Prod Technol 2013; 36(5): 99.
[19]
Xiaoyu WA, Zhenyun SO, Suoliang WA. Research and test on CO2 dry fracturing Liquid system. Oil Drilling Product Technol 2014; 36(6): 69-73.
[20]
Haizhu WA, Gensheng LI, Yong Z, et al. Research status and prospects of supercritical CO2 fracturing technology. Acta Petrol Sin 2020; 41(1): 116-26.
[21]
Kizaki A, Tanaka H, Ohashi K. Hydraulic fracturing in Inada granite and ogino tuff with super critical carbon dioxide; 2012 October 15-19; Seoul, Korea. Texas, United States: ISRM Regional Symposium - 7th Asian Rock Mechanics Symposium 2012.
[22]
Inui S, Ishida T, Nagaya Y. AE monitoring of hydraulic fracturing experiments in granite blocks using supercritical CO2, water and viscous oil; 2014 June 1-4; Minneapolis, Minnesota. Texas, United States: 48th US Rock Mechanics/Geomechanics Symposium 2014.
[23]
Crouch SL, Starfield AM. Boundary Elements in Solid Mechanics. London: George Allen and Unwin 1983; pp. 32-9.
[24]
Olson JE. Joint pattern development: Effects of subcritical crack growth and mechanical crack interaction. J Geophys Res 1993; 98(B7): 12251-65.
[http://dx.doi.org/10.1029/93JB00779]
[25]
Friedel L. Pressure drop during gas/vapour-liquid flow in pipes. Int Chemical Eng 1980; 20(3): 352-67.
[26]
Olson JE. Predicting fracture swarms - the influence of subcritical crack growth and the crack-tip process zone on joint spacing in rock. Spec Publ Geol Soc Lond 2004; 231(1): 73-88.
[http://dx.doi.org/10.1144/GSL.SP.2004.231.01.05]
[27]
Reid R C, Prausnitz J M, Sherwood T K. Properties of Gases and Liquids. Beijing: Petroleum lndustry Press 1994; 15-22.

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy