Login Register Cart 0
Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Effect of Field Plate on Device Performance of Wide Bandgap HEMT

Author(s): Geeta Pattnaik and Meryleen Mohapatra*

Volume 16, Issue 4, 2023

Published on: 26 December, 2022

Page: [460 - 470] Pages: 11

DOI: 10.2174/2352096516666221205115133

Price: $65

Abstract

Background: Devices with field plates have gained much popularity in high power and high voltage applications. The work done in this paper is related to designing and studying the different DC and RF characteristics of a field plated GaN HEMT. The results obtained were compared with that of non-field plated GaN HEMT. This comparison and study reported the effect of field plate on device performance.

Methods: A GaN HEMT device with and without a field plate was designed and simulated in the SILVACO ATLAS TCAD tool. The performance of both the devices was compared in terms of the exhibited DC and RF characteristics in order to study the effect of the field plate on the device. We have also studied the variation in the cut-off frequency and maximum frequency of both the field plate and without field plate GaN HEMT with respect to gate-source voltage. We have further investigated the device performance by varying the length of the field plate from 0 to 2.5 μm.

Results: The study reflects the advantageous feature of GaN HEMT with field plate by exhibiting high breakdown voltage of 292 V in comparison to GaN HEMT without field plate which exhibits a breakdown voltage of 98 V. As a result of using field plate in the GaN HEMT structure, a rise in the Cgs and Cgd capacitances are witnessed. This in turn affects the other RF characteristics of the GaN HEMT with field plate even though the GaN HEMT with and without field plate exhibits nearly same DC characteristics. The field plated GaN HEMT exhibits a reduced cut-off frequency and maximum frequency of 7 GHz and 20 GHz, respectively, in comparison to the GaN HEMT without field plate’s cut-off frequency and maximum frequency of 10 GHz and 25 GHz, respectively.

Conclusion: The study reports that using a field plate helps in enhancing the breakdown voltage but at the cost of reduced frequency performance. We have compared our proposed field plated device with different non-field plated devices and concluded that our device exhibits much higher breakdown voltage in spite of reduced device dimension. With the attainment of higher breakdown voltage our proposed GaN HEMT device can be used for high power applications. From the study, it is reported that while increasing the length of the field plate the breakdown voltage also increases. For a particular set of device dimensions, an optimum field plate length provides the highest breakdown voltage but increasing the length of the field plate beyond the optimum value results in reduction in breakdown voltage.

« Previous
Graphical Abstract

[1]
U.K. Mishra, Shen Likun, T.E. Kazior, and Yi-Feng Wu, "GaN-based RF power devices and amplifiers", Proc. IEEE, vol. 96, no. 2, pp. 287-305, 2008.
[http://dx.doi.org/10.1109/JPROC.2007.911060]
[2]
W. Saito, M. Kuraguchi, Y. Takada, K. Tsuda, I. Omura, and T. Ogura, "Design optimization of high breakdown voltage AlGaN-GaN power HEMT on an insulating substrate for R/sub ON/A-V/sub B/tradeoff characteristics", IEEE Trans. Electron Dev., vol. 52, no. 1, pp. 106-111, 2005.
[http://dx.doi.org/10.1109/TED.2004.841338]
[3]
V. Kumar, Guang Chen, Shiping Guo, and I. Adesida, "Field-plated 0.25-/spl μ/m gate-length AlGaN/GaN HEMTs with varying field-plate length", IEEE Trans. Electron Dev., vol. 53, no. 6, pp. 1477-1480, 2006.
[http://dx.doi.org/10.1109/TED.2006.874090]
[4]
R.C. Fitch, D.E. Walker, A.J. Green, S.E. Tetlak, J.K. Gillespie, and R.D. Gilbert, "Implementation of high-power-density X-band AlGaN/GaN high electron mobility transistors in a millimeter-wave monolithic microwave integrated circuit process", IEEE Electron Device Lett., vol. 36, pp. 1004-1007, 2015.
[http://dx.doi.org/10.1109/LED.2015.2474265]
[5]
M. Micovic, D.F. Brown, A. Kurdoghlian, D. Santos, B. Grabar, J. Magadia, I. Khalaf, H.Y. Tai, E. Prophet, S.D. Burnham, J.C. Wong, D. Regan, H.H. Fung, and Y. Tang, "GaN DHFET having 48% power-added efficiency and 57% drain efficiency at V-band", IEEE Electron Device Lett., vol. 38, no. 12, pp. 1708-1711, 2017.
[http://dx.doi.org/10.1109/LED.2017.2763940]
[6]
J.S. Moon, J. Wong, B. Grabar, M. Antcliffe, P. Chen, E. Arkun, I. Khalaf, A. Corrion, J. Chappell, N. Venkatesan, and P. Fay, "360 GHz f MAX graded-channel AlGaN/GaN HEMTs for mmW low- noise applications", IEEE Electron Device Lett., vol. 41, no. 8, pp. 1173-1176, 2020.
[http://dx.doi.org/10.1109/LED.2020.3005337]
[7]
J.S. Moon, R. Grabar, J. Wong, M. Antcliffe, P. Chen, E. Arkun, I. Khalaf, A. Corrion, J. Chappell, N. Venkatesan, and P. Fay, "High‐speed graded‐channel AlGaN/GaN HEMTs with power added efficiency >70% at 30 GHz", Electron. Lett., vol. 56, no. 13, pp. 678-680, 2020.
[http://dx.doi.org/10.1049/el.2020.0281]
[8]
J.S. Moon, B. Grabar, J. Wong, D. Chuong, E. Arkun, D.V. Morales, P. Chen, C. Malek, D. Fanning, N. Venkatesan, and P. Fay, "Power scaling of graded-channel GaN HEMTs with mini-field-plate T-gate and 156 GHz f T", IEEE Electron Device Lett., vol. 42, no. 6, pp. 796-799, 2021.
[http://dx.doi.org/10.1109/LED.2021.3075926]
[9]
J.S. Moon, D. Wong, P. Hashimoto, M. Hu, I. Milosavljevic, P. Willadsen, C. McGuire, S. Burnham, M. Micovic, M. Wetzel, and D. Chow, "Sub-1-dB noise figure performance of high-power field-plated GaN HEMTs", IEEE Electron Device Lett., vol. 32, no. 3, pp. 297-299, 2011.
[http://dx.doi.org/10.1109/LED.2010.2095408]
[10]
R. Tomita, S. Ueda, T. Kawada, H. Mitsuzono, and K. Horio, "Analysis of dependence of breakdown voltage on gate–drain distance in AlGaN/GaN HEMTs with high-k passivation layer", IEEE Trans. Electron Dev., vol. 68, no. 4, pp. 1550-1556, 2021.
[http://dx.doi.org/10.1109/TED.2021.3060353]
[11]
B.K. Jebalin, A. Shobha Rekh, P. Prajoon, N.M. Kumar, and D. Nirmal, "The influence of high-k passivation layer on breakdown voltage of Schottky AlGaN/GaN HEMTs", Microelectronics, vol. 46, no. 12, pp. 1387-1391, 2015.
[http://dx.doi.org/10.1016/j.mejo.2015.04.006]
[12]
M. Kaddeche, A. Telia, and A. Soltani, "Analytical modeling and analysis of Al m Ga1−m N/GaN HEMTs employing both field-plate and high-k dielectric stack for high-voltage operation", J. Comput. Electron., vol. 12, no. 3, pp. 501-510, 2013.
[http://dx.doi.org/10.1007/s10825-013-0468-5]
[13]
T. Kabemura, S. Ueda, Y. Kawada, and K. Horio, "Enhancement of breakdown voltage in AlGaN/GaN HEMTs: Field plate plus high- $k$ passivation layer and high acceptor density in buffer layer", IEEE Trans. Electron Dev., vol. 65, no. 9, pp. 3848-3854, 2018.
[http://dx.doi.org/10.1109/TED.2018.2857774]
[14]
H. Huang, Y.C. Liang, G.S. Samudra, T-F. Chang, and C-F. Huang, "Effects of gate field plates on the surface state related current collapse in AlGaN/GaN HEMTs", IEEE Trans. Power Electron., vol. 29, no. 5, pp. 2164-2173, 2014.
[http://dx.doi.org/10.1109/TPEL.2013.2288644]
[15]
W. Saito, Y. Kakiuchi, T. Nitta, Y. Saito, T. Noda, H. Fujimoto, A. Yoshioka, T. Ohno, and M. Yamaguchi, "Field-plate structure dependence of current collapse phenomena in high- voltage GaN-HEMTs", IEEE Electron Device Lett., vol. 31, no. 7, pp. 659-661, 2010.
[http://dx.doi.org/10.1109/LED.2010.2048741]
[16]
A. Koudymov, V. Adivarahan, J. Yang, G. Simin, and M.A. Khan, "Mechanism of current collapse removal in field-plated nitride HFETs", IEEE Electron Device Lett., vol. 26, no. 10, pp. 704-706, 2005.
[http://dx.doi.org/10.1109/LED.2005.855409]
[17]
D. Nirmal, L. Arivazhagan, A.S.A. Fletcher, J. Ajayan, and P. Prajoon, "Current collapse modeling in AlGaN/GaN HEMT using small signal equivalent circuit for high power application", Superlattices Microstruct., vol. 113, pp. 810-820, 2018.
[http://dx.doi.org/10.1016/j.spmi.2017.12.027]
[18]
Y. Saito, R. Tsurumaki, N. Noda, and K. Horio, "Analysis of reduction in lag phenomena and current collapse in field-plate AlGaN/GaN HEMTs with high acceptor density in a buffer layer", IEEE Trans. Device Mater. Reliab., vol. 18, no. 1, pp. 46-53, 2018.
[http://dx.doi.org/10.1109/TDMR.2017.2779429]
[19]
J. Liu, Y. Guo, J. Zhang, J. Yao, X. Huang, C. Huang, Z. Huang, and K. Yang, "Analytical model for the potential and electric field distributions of AlGaN/GaN HEMTs with gate-connected FP based on Equivalent Potential Method", Superlattices Microstruct., vol. 138, p. p. 106327 2020, .
[http://dx.doi.org/10.1016/j.spmi.2019.106327]
[20]
N.Q. Zhang, S. Keller, G. Parish, S. Heikman, S.P. DenBaars, and U.K. Mishra, "High breakdown GaN HEMT with overlapping gate structure", IEEE Electron Device Lett., vol. 21, no. 9, pp. 421-423, 2000.
[http://dx.doi.org/10.1109/55.863096]
[21]
A. Soni, "Ajay, and M. Shrivastava, “Novel drain-connected field plate GaN HEMT designs for improved VBD–RON tradeoff and RF PA performance”", IEEE Trans. Electron Dev., vol. 67, no. 4, pp. 1718-1725, 2020.
[http://dx.doi.org/10.1109/TED.2020.2976636]
[22]
B. Liao, Q. Zhou, J. Qin, and H. Wang, "Simulation of AlGaN/GaN HEMTs‟ breakdown voltage enhancement using gate field-plate, source field-plate and drain field plate", Electronics, vol. 8, no. 4, p. 406, 2019.
[http://dx.doi.org/10.3390/electronics8040406]
[23]
G. Xie, E. Xu, J. Lee, N. Hashemi, B. Zhang, F.Y. Fu, and W.T. Ng, "Breakdown-voltage-enhancement technique for RF-based AlGaN/GaN HEMTs with a source-connected air-bridge field plate", IEEE Electron Device Lett., vol. 33, no. 5, pp. 670-672, 2012.
[http://dx.doi.org/10.1109/LED.2012.2188492]
[24]
Y. Dora, A. Chakraborty, L. Mccarthy, S. Keller, S.P. Denbaars, and U.K. Mishra, "High breakdown voltage achieved on AlGaN/GaN HEMTs with integrated slant field plates", IEEE Electron Device Lett., vol. 27, no. 9, pp. 713-715, 2006.
[http://dx.doi.org/10.1109/LED.2006.881020]
[25]
K. Wong, "Novel asymmetric slant field plate technology for high- Speed Low-Dynamic Ron E/D-mode GaN HEMTs", IEEE Electron Device Lett., vol. 38, no. 1, pp. 95-98, 2017.
[http://dx.doi.org/10.1109/LED.2016.2634528]
[26]
H. Xing, Y. Dora, A. Chini, S. Heikman, S. Keller, and U.K. Mishra, "High breakdown voltage AlGaN-GaN HEMTs achieved by multiple field plates", IEEE Electron Device Lett., vol. 25, no. 4, pp. 161-163, 2004.
[http://dx.doi.org/10.1109/LED.2004.824845]
[27]
S. Karmalkar, and U.K. Mishra, "Enhancement of breakdown voltage in AlGaN/GaN high electron mobility transistors using a field plate", IEEE Trans. Electron Dev., vol. 48, no. 8, pp. 1515-1521, 2001.
[http://dx.doi.org/10.1109/16.936500]
[28]
S. Karmalkar, M.S. Shur, G. Simin, and M.A. Khan, "Field-plate engineering for HFETs", IEEE Trans. Electron Dev., vol. 52, no. 12, pp. 2534-2540, 2005.
[http://dx.doi.org/10.1109/TED.2005.859568]
[29]
ATLAS Device Simulation Software, Available from: https://www.academia.edu/42622852/Atlas_Users_Manual_Device_Simulation_Software
[30]
T.R. Lenka, and A.K. Panda, "Characteristics study of 2DEG transport properties of AlGaN/GaN and AlGaAs/GaAs-based HEMT", Semiconductors, vol. 45, no. 5, pp. 650-656, 2011.
[http://dx.doi.org/10.1134/S1063782611050198]
[31]
X. Cheng, and Y. Wang, "A surface-potential-based compact model for AlGaN/GaN MODFET", IEEE Trans. Electron Dev., vol. 58, no. 2, pp. 448-454, 2011.
[http://dx.doi.org/10.1109/TED.2010.2089690]
[32]
L. Zhu, J. Wang, H. Jiang, H. Wang, W. Wu, Y. Zhou, and G. Dai, "Theoretical analysis of buffer trapping effects on off-state breakdown between gate and drain in AlGaN/GaN HEMTs", 2016 International Conference on Integrated Circuits and Microsystems (ICICM), Nov 23-25, 2016, p. Chengdu, China, pp. 33-36, 2016, .
[http://dx.doi.org/10.1109/ICAM.2016.7813558]
[33]
B. Prasannanjaneyulu, S. Mishra, and S. Karmalkar, "Analysis of the significant rise in breakdown voltage of GaN HEMTs from near-threshold to deep off-state gate bias conditions", IEEE Trans. Device Mater. Reliab., vol. 19, no. 4, pp. 766-773, 2019.
[http://dx.doi.org/10.1109/TDMR.2019.2950604]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy