Generic placeholder image

Recent Advances in Electrical & Electronic Engineering

Editor-in-Chief

ISSN (Print): 2352-0965
ISSN (Online): 2352-0973

Research Article

Development of High Voltage DC Power Supply from Tesla Coil Using Hybrid Energy Sources

Author(s): Mobeen Yaseen, Arslan Ahmed Amin*, Muhammad Gufran Khan, Muhammad Adnan, Abdullah Mughees and Mohsin Mukhtar

Volume 15, Issue 5, 2022

Published on: 19 August, 2022

Page: [410 - 420] Pages: 11

DOI: 10.2174/2352096515666220627122756

Price: $65

Abstract

Background: High Voltage Direct Current (HVDC) is a well-proven technology used to transmit electricity over long distances by overhead transmission lines or submarine cables. It is also used to interconnect separate power systems, where traditional Alternating Current (AC) connections cannot be used.

Objective: In this paper, an HVDC supply has been proposed with the Tesla coil using hybrid energy sources, such as solar panels, batteries, and AC main supply with an AC-DC converter.

Methods: DC voltage is obtained from various hybrid sources and is supplied to the input of the Cockcroft-Walton (C-W) voltage multiplier circuit through DC/AC inversion.

Results: The produced HVDC is provided to the Tesla coil to obtain a stable HVDC output. Fractional Order PID (FOPID) controller is used in the system for control purposes to stabilize the output voltage due to load variations. The model is designed in Matlab / Simulink environment. The simulation results show that the proposed design successfully achieved a stable 15 kV HVDC.

Conclusion: The advantage of the proposed system is the availability of variable output voltage as per load requirement compared to the fixed limited output voltage generated by conventional HVDC systems.

Keywords: High voltage DC Supply, FOPID controller, Cockcroft-Walton voltage multiplier, Boost converter, Tesla coil, AC .

Graphical Abstract

[1]
Z. Li, "Recent developments in HVDC transmission systems to support renewable energy integration", Global Energy Interconnection, vol. 1, no. 5, pp. 595-607, 2018.
[http://dx.doi.org/10.14171/j.2096-5117.gei.2018.05.009]
[2]
C. Boonseng, P. Apiratikul, and C. Phanomsarnrin, "A low cost approach to design the Tesla transformer for testing of insulating materials and industrial applications", In Conference Record of the the 2002 IEEE International Symposium on Electrical Insulation (Cat. No. 02CH37316), 2002, pp. 248-251.
[http://dx.doi.org/10.1109/ELINSL.2002.995924]
[3]
R. Toro, How the Tesla Coil Works (Infographic)., 2014. Available from: https://www.livescience.com/46728-how-the-tesla-coil-works-infographic.html (Accessed on June 3, 2022).
[4]
L.F. Costa, S.A. Mussa, and I. Barbi, "Multilevel boost DC-DC converter derived from basic double-boost converter", In 15th European Conference on Power Electronics and Applications (EPE), 2013, pp. 1-10.
[http://dx.doi.org/10.1109/EPE.2013.6634629]
[5]
M.H. Shahbaz, K. Amjad, N. Ahmad, A.A. Amin, S. Iqbal, M.G. Khan, and M. Adnan, "A streamlined 17-level cascaded H-bridge multilevel converter with solar PV integration", Bull. Electr. Eng. Inform., vol. 10, no. 2, pp. 598-608, 2021.
[http://dx.doi.org/10.11591/eei.v10i2.2764]
[6]
E. Serban, M. Ordonez, and C. Pondiche, "DC-bus voltage range extension in 1500 V photovoltaic inverters", IEEE J. Emerg. Sel. Top. Power Electron., vol. 3, no. 4, pp. 901-917, 2015.
[http://dx.doi.org/10.1109/JESTPE.2015.2445735]
[7]
M. Boss, F. Herty, K. Rogalla, and M. Gollor, "Generic high voltage power module for electrical propulsion", In Proc. 29th Int. Elect. Propulsion Conf., 2005, pp. 1-9.
[8]
J. Sun, X. Ding, M. Nakaoka, and H. Takano, "Series resonant ZCS–PFM DC–DC converter with multistage rectified voltage multiplier and dual-mode PFM control scheme for medical-use high-voltage X-ray power generator", IEE Proc., Electr. Power Appl., vol. 147, no. 6, pp. 527-534, 2000.
[http://dx.doi.org/10.1049/ip-epa:20000711]
[9]
J.C. Rosas-Caro, J.M. Ramirez, and P.M. Garca-Vite, "Novel DC-DC multilevel boost converter", IEEE Power Electronics Specialists Conference, 2008, pp. 2146-2151.
[http://dx.doi.org/10.1109/PESC.2008.4592260]
[10]
S.Z.N. Demon, A.R. Tamuri, and N. Bidin, "High voltage switch mode power supply for laser system", In 2009 International Conference for Technical Postgraduates (TECHPOS), 2009, pp. 1-4.
[http://dx.doi.org/10.1109/TECHPOS.2009.5412120]
[11]
A. Bharagv, R. Kumar, S. Tapan, L. Gupta, and A.R. Gupta, "High voltage and its applications: A review", In IEEE 8th Power India International Conference (PIICON), 2018, pp. 1-6.
[http://dx.doi.org/10.1109/POWERI.2018.8704370]
[12]
Y. Bai, J. Li, Y. Mei, and D. Kang, "Experiment of drying kelp with high voltage electric fields", 2008 International Conference on High Voltage Engineering and Application, 2008, pp. 732-734.
[http://dx.doi.org/10.1109/ICHVE.2008.4774039]
[13]
R. Vial, D. Riu, and N. Retire, "Simulating calculations and optimization design of a new HVDC supply power for light rail system", IECON 2010-36th Annual Conference on IEEE Industrial Electronics Society, 2010, pp. 2364-2369.
[http://dx.doi.org/10.1109/IECON.2010.5675339]
[14]
N.A. Azmi, S.A.Z. Murad, A. Harun, and R.C. Ismail, "5V to 6kV DC-DC converter using switching regulator with cockcroft-walton voltage multiplier for high voltage power supply module", Recent Adv. Electr. Electr. Eng., vol. 12, no. 2, pp. 162-171, 2019.
[http://dx.doi.org/10.2174/2352096511666180605094827]
[15]
N.A. Azmi, "Design of DC high voltage and low current power supply using Cockroft-Walton (CW) voltage multiplier", In 2016 3rd International Conference on Electronic Design (ICED), 2016, pp. 13-17.
[16]
P. Nayak, S.K. Pramanick, and K. Rajashekara, "Isolated single stage AC-DC converter topologies with regenerative snubber circuit for EV application", IECON 2018-44th Annual Conference of the IEEE Industrial Electronics Society, 2018, pp. 1285-1290.
[http://dx.doi.org/10.1109/IECON.2018.8591834]
[17]
Z. Liao, Y. Lei, and R.C.N. Pilawa-Podgurski, “A GaN-based flying-capacitor multilevel boost converter for high step-up conversion”, IEEE Energy Conversion Congress and Exposition., (ECCE), 2016, pp. 1-7.
[18]
Y. Ye, and K.W.E. Cheng, "Analysis and optimization of switched capacitor power conversion circuits with parasitic resistances and inductances", IEEE Trans. Power Electron., vol. 32, no. 3, pp. 2018-2028, 2017.
[http://dx.doi.org/10.1109/TPEL.2016.2569439]
[19]
Z. Liao, Y. Lei, and R.C.N. Pilawa-Podgurski, "Analysis and design of a high power density flying-capacitor multilevel boost converter for high step-up conversion", IEEE Trans. Power Electron., vol. 34, no. 5, pp. 4087-4099, 2019.
[http://dx.doi.org/10.1109/TPEL.2018.2858184]
[20]
N. Teraguchi, and M. Minami, "Development of musical solid‐state Tesla coil based on pulse repetition frequency method", Electron. Commun. Jpn., vol. 102, no. 8, pp. 11-16, 2019.
[http://dx.doi.org/10.1002/ecj.12196]
[21]
F. Hwang, Y. Shen, and S.H. Jayaram, "Low-ripple compact high-voltage DC power supply", IEEE Trans. Ind. Appl., vol. 42, no. 5, pp. 1139-1145, 2006.
[http://dx.doi.org/10.1109/TIA.2006.880845]
[22]
J. Cunha, S. Pinto, and J.F. Silva, "Cockcroft-Walton based HVDC system", IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL), 2017, pp. 1-6.
[http://dx.doi.org/10.1109/COMPEL.2017.8013381]
[23]
N.M. Waghamare, and R.P. Argelwar, "High voltage generation by using Cockcroft-Walton multiplier", Int. J. Sci. Eng. Technol. Res., vol. 4, no. 2, pp. 256-259, 2015.
[24]
M. Samizadeh Nikoo, S.M.A. Hashemi, and M. Vakilian, "DSRD-based HVdc power supply", IEEE Trans. Plasma Sci., vol. 46, no. 6, pp. 2108-2113, 2018.
[http://dx.doi.org/10.1109/TPS.2018.2825438]
[25]
C.M. Young, H.L. Chen, and M.H. Chen, "A Cockcroft Walton voltage multiplier fed by a three-phase-to-single-phase matrix converter with PFC", IEEE Trans. Ind. Appl., vol. 50, no. 3, pp. 1994-2004, 2014.
[http://dx.doi.org/10.1109/TIA.2013.2287479]
[26]
M. Quraan, A. Zahran, A. Herzallah, and A. Ahmad, "Design and model of series connected high voltage DC multipliers", IEEE Trans. Power Electron., vol. 35, no. 7, pp. 7160-7174, 2019.
[27]
D.M. Giuliano, D.J. Perreault, and R.C.N. Pilawa-Podgurski, "Power converter with capacitive energy transfer and fast dynamic response", IEEE J. Emerg. Sel. Top. Power Electron., vol. 2, no. 3, pp. 395-405, 2014.
[28]
S. Yousaf, A. Mughees, M.G. Khan, A.A. Amin, and M. Adnan, "A comparative analysis of various controller techniques for optimal control of smart nano-grid using GA and PSO algorithms", IEEE Access, vol. 8, pp. 205696-205711, 2020.
[http://dx.doi.org/10.1109/ACCESS.2020.3038021]
[29]
B.C.Y. Li, X. Lyu, and D. Cao, “Single-Wing resonant multilevel converter featuring reduced number of resonant inductors”, IEEE Energy Conversion Congress and Exposition., (ECCE), 2017, pp. 1733-1738.
[30]
Y. Lei, C. Barth, S. Qin, W.C. Liu, I. Moon, A. Stillwell, D. Chou, T. Foulkes, Z. Ye, Z. Liao, and R.C.N. Pilawa-Podgurski, "A 2-kW single-phase seven-level flying capacitor multilevel inverter with an active energy buffer", IEEE Trans. Power Electron., vol. 32, no. 11, pp. 8570-8581, 2017.
[http://dx.doi.org/10.1109/TPEL.2017.2650140]
[31]
N.M. Khoa, N.A. Toan, and D.D. Tung, "Experimental study on fault ride-through capability of VSC-based HVDC transmission system", Bull. Pol. Acad. Sci. Tech. Sci., vol. 70, pp. 37-51, 2021.
[32]
C. Li, Y. Li, J. Guo, and P. He, "Research on emergency DC power support coordinated control for hybrid multi-infeed HVDC system", Bull. Pol. Acad. Sci. Tech. Sci., vol. 69, pp. 5-21, 2020.
[33]
Boost Converter, 2019. Available from: https://www.mathworks.com/matlabcentral/fileexchange/73132-boost-converter (Accessed on June 3, 2022).
[34]
T. Verma, and A.K. Mishra, "Comparative study of PID and FOPID controller response for automatic voltage regulation", IOSR J. Eng., vol. 4, no. 9, pp. 41-48, 2014.
[http://dx.doi.org/10.9790/3021-04954148]
[35]
A.P. Patel, and M. Rathod, "Design, simulation and construction of cockroft walton voltage multiplier", J. Glob. Res. Develop. J. Eng., vol. 1, no. 4, pp. 67-71, 2016.
[36]
C.K. Dwivedi, and M.B. Daigvane, "Multi-purpose low cost DC high voltage generator (60kV output), using Cockcroft-Walton voltage multiplier circuit", In 2010 3rd International Conference on Emerging Trends in Engineering and Technology, 2010, pp. 241-246.
[http://dx.doi.org/10.1109/ICETET.2010.150]

Rights & Permissions Print Cite
© 2024 Bentham Science Publishers | Privacy Policy