Login Register Cart 0
Generic placeholder image

Current Applied Polymer Science

Editor-in-Chief

ISSN (Print): 2452-2716
ISSN (Online): 2452-2724

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Eucalyptus Bark as Source of Bio-oil or Phenolic Compounds

Author(s): Alcides L. Leão*, Ivana Cesarino, Otávio A. T. Dias, Mirela B. Carnietto and Mohini Sain

Volume 4, Issue 2, 2021

Published on: 28 January, 2021

Page: [128 - 133] Pages: 6

DOI: 10.2174/2452271604999210128175314

Price: $65

conference banner
Abstract

Background: Eucalyptus bark and scraps are generated in the production of mediumdensity fiberboard (MDF). An approach aiming to add value to such wastes was studied, following the concepts of circular economy and biomass cascade strategy. Bio-oil and phenolic resin were produced by pyrolysis from two types of biomass, Eucalyptus bark and MDF waste. As is well known, conventional phenolic resins are normally obtained from fossil resources. These products were obtained from the pyrolysis of two types of biomass to reduce environmental waste and dependence on petroleum-based products.

Objective: The main objective of the present study was to produce phenolic resin from Eucalyptus wastes, aiming to reduce the fossil dependence on conventional resins used in the production line of MDF.

Methods: Fast pyrolysis and slow pyrolysis were employed for bio-oil and phenolic resin production. The bio-oil and resins were characterized with standard lab analyses for their physicochemical properties, while their thermal properties were studied via thermogravimetric analysis (TGA).

Results: The shear strength of the lap internal bonding of the phenolic resin binders with 19.8% of bio-oil was 2.09, 1.34, and 1.63 MPa under dry, boiler, and soaked conditions, respectively, which was acceptable for panel fabrication and can represent a significant saving in terms of fossil resins and cost reduction.

Discussion: According to the results, 1 g medium fraction of bio-oils was equivalent to 1.35 g of conventional phenols, indicating those bio-oils as phenolic structures that could be used as binders. The bio-oil yields for bark and MDF were 40.9 and 25.1, respectively, which indicate a potential for replacing the conventional fossil-based phenolic resin.

Conclusion: The results revealed the possibility of replacing conventional fossil-based chemicals with phenolic resin from renewable resources with similar overall properties, replacing about 1/3 of the conventional resin.

Keywords: Pyrolysis, phenolic compounds, bio-oil, bioenergy, biomass, forestry wastes.

« Previous Next »
Graphical Abstract

[1]
Pandey A, Höfer R, Taherzadeh M, Nampoothiri M, Larroche C. Industrial biorefineries and white biotechnology. Amsterdam, Netherlands: Elsevier 2015.
[2]
Omer AM. Biomass energy resources utilisation and waste management. Agric Sci 2012; 3(1): 124-45.
[http://dx.doi.org/10.4236/as.2012.31016]
[3]
Moncada J, Aristizábal V, Cardona CA. Design strategies for sustainable biorefineries. Biochem Eng J 2016; 116: 122-34.
[http://dx.doi.org/10.1016/j.bej.2016.06.009]
[4]
Cha JS, Park SH, Jung SC, et al. Production and utilization of biochar: A review. J Ind Eng Chem 2016; 40: 1-15.
[http://dx.doi.org/10.1016/j.jiec.2016.06.002]
[5]
Peacocke GVC, Bridgwater AV. Ablative plate pyrolysis of biomass for liquids. Biomass Bioenergy 1994; 7(1-6): 147-54.
[http://dx.doi.org/10.1016/0961-9534(94)00054-W]
[6]
Czernik S, Bridgwater AV. Overview of applications of biomass fast pyrolysis oil. Energy Fuels 2004; 18(2): 590-8.
[http://dx.doi.org/10.1021/ef034067u]
[7]
Karaosmanoǧlu F, Tetik E. Fuel properties of pyrolytic oil of the straw and stalk of rape plant. Renew Energy 1999; 16(1-4): 1090-3.
[http://dx.doi.org/10.1016/S0960-1481(98)00422-4]
[8]
Shihadeh A, Hochgreb S. Diesel engine combustion of biomass pyrolysis oils. Energy Fuels 2000; 14(2): 260-74.
[http://dx.doi.org/10.1021/ef990044x]
[9]
Shamsul NS, Kamarudin SK, Rahman NA. Conversion of bio-oil to bio gasoline via pyrolysis and hydrothermal: A review. Renew Sustain Energy Rev 2017; 80: 538-49.
[http://dx.doi.org/10.1016/j.rser.2017.05.245]
[10]
Amen-Chen C, Pakdel H, Roy C. Production of monomeric phenols by thermochemical conversion of biomass: a review. Bioresour Technol 2001; 79(3): 277-99.
[http://dx.doi.org/10.1016/S0960-8524(00)00180-2] [PMID: 11499582]
[11]
Bridgwater AV. Renewable fuels and chemicals by thermal processing of biomass. Chem Eng J 2003; 91(2-3): 87-102.
[http://dx.doi.org/10.1016/S1385-8947(02)00142-0]
[12]
Dhyani V, Bhaskar T. A comprehensive review on the pyrolysis of lignocellulosic biomass. Renew Energy 2018; 129(Part B): 695-716.
[http://dx.doi.org/10.1016/j.renene.2017.04.035]
[13]
Bu Q, Lei H, Wang L, et al. Bio-based phenols and fuel production from catalytic microwave pyrolysis of lignin by activated carbons. Bioresour Technol 2014; 162: 142-7.
[http://dx.doi.org/10.1016/j.biortech.2014.03.103] [PMID: 24747393]
[14]
Dorantes-Alvarez L, Jaramillo-Flores ME, González-Cruz L, Cornejo-Mazón M, Gutiérrez-López GF, Hernández-Sánchez H. Effect of thermal treatment on the antioxidant activity and content of carotenoids and phenolic compounds of cactus pear cladodes (Opuntia ficus-indica). Food Sci Technol Int 2003; 9(4): 271-8.
[http://dx.doi.org/10.1177/108201303036093]
[15]
Guedes RE, Luna AS, Torres AR. Operating parameters for bio-oil production in biomass pyrolysis: A review. J Anal Appl Pyrolysis 2018; 129: 134-49.
[http://dx.doi.org/10.1016/j.jaap.2017.11.019]
[16]
Forth KD. Global MDF market tops $38 billion: Indexbox. Woodworking Network 2018.https://www.woodworkingnetwork.com/news/woodworking-industry-news/global-mdf-market-tops-38-billion-indexbox
[17]
Paradela F, Pinto F, Ramos AM, Gulyurtlu I, Cabrita I. Study of the slow batch pyrolysis of mixtures of plastics, tyres and forestry biomass wastes. J Anal Appl Pyrolysis 2009; 85(1): 392-8.
[http://dx.doi.org/10.1016/j.jaap.2008.09.003]
[18]
Alara OR, Abdurahman NH, Olalere OA. Ethanolic extraction of flavonoids, phenolics and antioxidants from Vernonia amygdalina leaf using two-level factorial design. J King Saud Univ Sci 2017; 32(1): 7-16.
[http://dx.doi.org/10.1016/j.jksus.2017.08.001]
[19]
Dahmoune F, Nayak B, Moussi K, Remini H, Madani K. Optimization of microwave-assisted extraction of polyphenols from Myrtus communis L. leaves. Food Chem 2015; 166: 585-95.
[http://dx.doi.org/10.1016/j.foodchem.2014.06.066] [PMID: 25053097]
[20]
ASTM D1002-10. Standard test method for apparent shear strength of single-lap-joint adhesively bonded metal specimens by tension loading (metal-to-metal). West Conshohocken, ASTM International 2019.
[21]
TAPPI T222 om-06. Acid insoluble lignin in wood and pulp. Atlanta, TAPPI Press 2006.
[22]
TAPPI T412. Moisture in pulp, paper and paperboard. Atlanta, TAPPI Press 2012.
[23]
TAPPI T212 om-07. One percent sodium hydroxide solubility of wood and pulp. Atlanta, TAPPI Press 2007.
[24]
TAPPI T204 cm-07. Solvent extractives of wood and pulp. Atlanta, TAPPI Press 2007.
[25]
TAPPI T211 om-07. Ash in wood, pulp, paper and paperboard: Combustion at 525 °C. Atlanta, TAPPI Press 2007.
[26]
TAPPI T207 cm-08. Water solubility of wood and pulp. Atlanta, TAPPI Press 2008.
[27]
Bastiaans RJM, Toland A, Holten A, de Goey LPH. Kinetics of CO release from bark and medium density fibreboard pyrolysis. Biomass Bioenergy 2010; 34(5): 771-9.
[http://dx.doi.org/10.1016/j.biombioe.2010.01.020]
[28]
Jorge FC, Neto CP, Irle MA, Gil MH, De Jesus JP. Wood adhesives derived from alkaline extracts of maritime Pine bark: Preparation, physical characteristics and bonding efficacy. Holz Roh- Werkst 2002; 60: 303-10.
[http://dx.doi.org/10.1007/s00107-002-0302-4]
[29]
Feng S, Yuan Z, Leitch M, Xu CC. Hydrothermal liquefaction of barks into bio-crude – effects of species and ash content/composition. Fuel 2014; 16: 214-20.
[http://dx.doi.org/10.1016/j.fuel.2013.07.096]
[30]
Abnisa F, Arami-Niya A, Wan Daud WMA, Sahu JN, Noor IM. Utilization of oil palm tree residues to produce bio-oil and bio-char via pyrolysis. Energy Convers Manage 2013; 76: 1073-82.
[http://dx.doi.org/10.1016/j.enconman.2013.08.038]
[31]
Yang L, Liu J, Du C, Qiang Y. Preparation and properties of cornstarch adhesives. Adv J Food Sci Technol 2013; 8: 1068-72.
[http://dx.doi.org/10.19026/ajfst.5.3207]
[32]
Cui Y, Hou X, Wang W, Chang J. Synthesis and characterization of bio-oil phenol formaldehyde resin used to fabricate phenolic based materials. Materials (Basel) 2017; 10(6): 1-9.https://doir.org/10.3390/ma10060668
[http://dx.doi.org/10.3390/ma10060668] [PMID: 28773027]
[33]
Chen D, Zhou J, Zhang Q, Zhu X. Evaluation methods and research progresses in bio-oil storage stability. Renew Sustain Energy Rev 2014; 40: 69-79.
[http://dx.doi.org/10.1016/j.rser.2014.07.159]
[34]
Chang SH. An overview of empty fruit bunch from oil palm as feedstock for bio-oil production. Biomass Bioenergy 2014; 62: 174-81.
[http://dx.doi.org/10.1016/j.biombioe.2014.01.002]
[35]
Yin R, Liu R, Mei Y, Fei W, Sun X. Characterization of bio-oil and bio-char obtained from sweet sorghum bagasse fast pyrolysis with fractional condensers. Fuel 2013; 112: 96-104.
[http://dx.doi.org/10.1016/j.fuel.2013.04.090]
[36]
ASTM D1037-99. Standard test methods for evaluating properties of wood-base fiber and particle panel materials. West Conshohocken, ASTM International 2013.

Rights & Permissions Print Cite
Article Metrics
11
1
© 2024 Bentham Science Publishers | Privacy Policy