Login Register Cart 0
Generic placeholder image

Recent Advances in Computer Science and Communications

Editor-in-Chief

ISSN (Print): 2666-2558
ISSN (Online): 2666-2566

Back
Journal Home About Journal Editorial Board Current Issue Volumes/Issues
Subscribe
Research Article

The Overall Design of the Comber Drive Control System

Author(s): Xiaobei Wang*

Volume 15, Issue 8, 2022

Published on: 07 December, 2020

Page: [1043 - 1051] Pages: 9

DOI: 10.2174/2666255813666201207153321

Price: $65

Abstract

Objective: The cotton textile industry, as a competitive industry in China's international competition, is confronting new opportunities and challenges brought about by the growing popularity of mechatronics. To further improve the traditional drive control of combing machines made in China and the automatic level of machines as a whole, some of our cotton textile enterprises have undertaken necessary technical transformations on the combing machines so as to advance the operational efficiency and production technology of domestic textile equipment.

Methods: This paper focuses on the basic status and dynamic characteristics of the drive part of the domestic new comber, and analyzes the operation process of the comber and the prominent problems from the production practice.

Results: The technically improved drive control system uses an industrial control computer (IPC) as the core of the system, which effectively improves the overall working efficiency of the comber, and improves the production accuracy and production efficiency.

Conclusion: The combers that are textile machinery equipment with a comprehensive application of machines, electricity, gases and instruments, play a vital role in enhancing product quality and production efficiency. Highly intelligent and integrated process control, real-time monitoring and accurate data acquisition and data analysis have become the mainstreams in the development of auto-control. Therefore, the commitment of high technology to transform the traditional production mode has also been important research.

Keywords: New domestic comber, drive control system, industrial control computer, process parameters, gearing control algorithm, PID control.

[1]
A.T. Burkov, O.S. Valinsky, A.M. Evstaf’ev, A.S. Maznev, and A.V. Tretyakov, "Modern Locomotive Traction Drive Control Systems[J]", Russian Electrical Engineering, vol. 90, no. 9, pp. 692-695, 2019.
[2]
Dennis Scimeca, "Industrial computer includes toolkit for deep learning models[J]", Vision Systems Design, vol. 24, no. 6, p. 30, 2019.
[3]
K. Liu, and S. Tan, "Research on Tension Control Strategy of Flexible Transmission System [J]", Industrial Control Computer, vol. 31, no. 4, pp. 48-49, 2018.
[4]
M.A.M. Persechini, and L.T.S. Mendes, "Performance analysis among different acquisition systems for process control", ISA Trans., vol. 97, pp. 86-92, 2020.
[http://dx.doi.org/10.1016/j.isatra.2019.08.003] [PMID: 31420122]
[5]
Anonymous, "Programmable logic controller", InTech, vol. 65, no. 2, p. 47, 2018.
[6]
H. Jouni, A. Harb, G. Jacquemod, and Y. Leduc, "Design and specification of analog artificial neural network [J].SN", Appl. Sci. (Basel), vol. 1, no. 11, pp. 1-15, 2019.
[7]
C. Berger, A. Fetzer, T. Stykel, S. Braunreuther, and G. Reinhart, "Stability Analysis of a Control-Theoretic Work System Model", Procedia CIRP, vol. 83, pp. 642-648, 2019.
[http://dx.doi.org/10.1016/j.procir.2019.04.238]
[8]
C. Xiao, and L. Tan, "Application Research of Neural Network in the Field of Intelligent Control", Jiangsu Science & Technology Information, vol. 000, no. 20, pp. 57-59, 2017.
[9]
T. Pangya, A. Thedsakhulwong, and C. Ekwongsa, "Development of the PID controller and real-time monitoring system for a low-temperature furnace", J. Phys. Conf. Ser., vol. 1144, no. Issue. 1, 2018.
[http://dx.doi.org/10.1088/1742-6596/1144/1/012160]
[10]
S. Tronci, R. Baratti, and J. Na, "A Gain-Scheduling PI Control Based on Neural Networks", Complexity, pp. 1-8, 2017.
[http://dx.doi.org/10.1155/2017/9241254]
[11]
Dayong Fan, "Research Status and Application Prospect of PID Control Method [J]", Digital Communication World, no. 1, pp. 129-130, 2019.
[12]
M. Fayed, M. Elhadary, and H. Ait Abderrahmane, "Bassem Nashaat Zakher:The Ability of Forecasting Flapping Frequency of Flexible Filament by Artificial Neural Network", Alexandria Engineering Journal, vol. 58, no. 4, pp. 1367-1374, 2019.
[http://dx.doi.org/10.1016/j.aej.2019.11.007]
[13]
X. Luo, "Computer intelligent control system and application", China Southern Agricultural Machinery, vol. 48, no. 24, p. 132, 2017.
[14]
P. Dasgupta, "Science, technology and artificial intelligence", BJU Int., vol. 122, no. 6, p. 913, 2018.
[http://dx.doi.org/10.1111/bju.14595] [PMID: 30460789]
[15]
Khaled Eltag, Muhammad Shamrooz Aslamx, and Rizwan Ullah, "Dynamic Stability Enhancement Using Fuzzy PID Control Technology for Power System[J]s", International Journal of Control, Automation and Systems, vol. 17, no. 1, pp. 234-242, 2019.
[16]
L. Huang, and D. Zou, "Design and Simulation of a Fuzzy PID Controller [J]", In: Mechanical Engineer, 2018, no. 11, pp. 7-9.
[17]
Z. Hu, and Y. Zhao, "Self-tuning PID control based on improved BP neural network", Computer and Information Technology, vol. 27, no. 1, pp. 11-13, 2019.
[18]
G.Y. Bade, and A.A. Afaro, "Object Oriented Software Development for Artificial Intelligence", American Journal of Software Engineering and Applications, vol. 7, no. 2, pp. 22-24, 2018.
[19]
M. Davanipour, H. Javanmardi, and N. Goodarzi, "Chaotic Self-Tuning PID Controller Based on Fuzzy Wavelet Neural Network Model", Iran. J. Sci. Technol. Trans. Electr. Eng., vol. 42, no. 3, pp. 357-366, 2018.
[http://dx.doi.org/10.1007/s40998-018-0069-1]
[20]
Reinhard Langmann, and Michael Stiller, "The PLC as a Smart Service in Industry 4.0 Production Systems [J]", Applied Sciences, vol. 9, no. 18, p. 3815, 2019.
[21]
F. Lamb, "Advantages of reusable code for programmable controllers", Control Eng., vol. 64, no. 2, p. 64, 2017.
[22]
T. Mark, "Hoske: Ease of use: Programmable controllers", Control Eng., vol. 64, no. 7, p. 8, 2017.
[23]
A. Wang, "The application of computers in the field of mechanical and electronic control industry", China Southern Agricultural Machinery, vol. 48, no. 24, p. 134, 2017.
[24]
Y. Sun, "Application of Industrial Automation Computer Control System", Science and Technology & Innovation, vol. 000, no. 24, pp. 154-155, 2018.
[25]
Tianchi Zhai, "Common interference and treatment measures in industrial control computer systems [J]", Computer fan, vol. 000, no. 2, pp. 108-109, 2018.
[26]
Hanane Zermane, and Rached Kasmi, "Intelligent Industrial Process Control Based on Fuzzy Logic and Machine Learning [J", International Journal of Fuzzy System Applications (IJFSA), vol. 9, no. 1, pp. 92-111, 2020.
[27]
Peicheng Hu, "Research on Computer Network Remote Control System [J]", Computer fan, vol. 000, no. 5, p. 258, 2018.
[28]
A.V. Gurjanov, D.A. Zakoldaev, and A.V. Shukalov, "Computer control system for automatic manufacturing Industry 4.0", IOP Conf. Series Mater. Sci. Eng., vol. 441, no. Issue. 1, 2018.
[http://dx.doi.org/10.1088/1757-899X/441/1/012063]
[29]
O. Miguel-Escrig, J-A. Romero-Pérez, and R. Sanchis-Llopis, "Tuning PID controllers with symmetric send-on-delta sampling strategy", J. Franklin Inst., vol. 357, no. 2, pp. 832-862, 2019.
[http://dx.doi.org/10.1016/j.jfranklin.2019.10.008]
[30]
V.R. Kasi, S. Majhi, and A.K. Gogoi, "Identification and PID tuning techniques for stable and unstable SOPDT processes", International Journal of Dynamics and Control, vol. 6, no. 3, pp. 1194-1206, 2018.
[http://dx.doi.org/10.1007/s40435-017-0362-2]

Rights & Permissions Print Cite
Article Metrics
9
© 2024 Bentham Science Publishers | Privacy Policy