Login Register Cart 0
Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Numerical DEM Analysis on Coal Loading Process of Shearer Spiral Drum

Author(s): Zhen Tian , Shuangxi Jing*, Shan Gao and Lijuan Zhao

Volume 14, Issue 1, 2021

Published on: 17 May, 2020

Page: [53 - 62] Pages: 10

DOI: 10.2174/2212797613999200517125606

Price: $65

conference banner
Abstract

Background: In order to study the loading process of shearer spiral drum, the theoretical model of loading process of spiral drum was established based on the kinematic characteristics of coal block in the envelope region of spiral drum.

Objective: A spiral drum was designed for MG400/951-WD shearer, and this spiral drum was taken as the research object, the influence of spiral angle of the blade and rotation speed of the spiral drum on the theoretical coal capacity was analyzed.

Methods: The intrinsic parameters of coal were calibrated according to the physical and mechanical properties of coal samples in Ordos Wenyu coal mine, a discrete element model of the coupling of the spiral drum and the coal wall was constructed.

Results: The velocity and mass distribution of coal particles in the loading process were obtained by numerical simulation. The simulation results show that the loading rate of spiral drum was 65.6%. Through industrial test and theoretical calculation, the coal loading rate of spiral drum under the same conditions was 63% and 68.4%, and the maximum relative error between the results and theoretical calculation was 7.89%.

Conclusion: The error between the coal loading rate obtained by the simulation, theoretical calculation and the test was small. It shows that the simulation results can accurately reflect the coal charging process of the spiral drum. In this article, various patents have discussed.

Keywords: Discrete element, industrial test, loading process, numerical simulation, shearer, spiral drum.

« Previous Next »
[1]
Hoseinie SH, Ataei M, Khalokakaie R, Ghodrati B, Kumar U. Reliability analysis of drum shearer machine at mechanized long wall mines. J Qual Mainten Eng 2012; 18(1): 98-119.
[http://dx.doi.org/10.1108/13552511211226210]
[2]
Zhao L-J, He J-J, Xu J, Liu W. Effect of pick arrangement on the load of shearer in the thin coal seam. J China Coal Soc 2011; 36(8): 1401-6.
[3]
Luo CX, Jing SX, Han XM, Du CL. Cutting force test system applied in coal seam with interface cutting experiment. Recent Pat Mech Eng 2016; 9(4): 305-10.
[http://dx.doi.org/10.2174/2212797609666161107124913]
[4]
Zhao LJ, Ma LW. Thin seam shearer reliability analysis and fatigue life prediction. J China Coal Soc 2013; 38(7): 1287-92.
[5]
Tian Z, Zhao LJ, Zhang JJ, Gao S. Study on mechanical behaviour of spiral drum under complex condition of coal seam. Mech Sci Tech Eng 2019; 38(7): 1041-7.
[6]
Jiang HX, Du CL, Liu SY. The effects of impact velocity on energy and size distribution of rock crushing. J China Coal Soc 2013; 38(4): 604-9.
[7]
Zhao L, Tian Z, Liu X, Xie B. Simulation analysis of load characteristic of thin seam shearer drum. J Syst Sim 2015; 27(12): 3102-8.
[8]
Abu B, Muhammad Z. Evaluation of saturation effects on drag pick cutting of a brittles and stone from full scale linear cutting tests. Tunn Undergr Space Technol 2013; 34(1): 124-234.
[9]
Liu XH, Liu SY, Tang P. Coal fragment size model in cutting process. Powder Technol 2015; 272: 282-9.
[http://dx.doi.org/10.1016/j.powtec.2014.12.015]
[10]
Okan S, Nuri AA. Numerical simulation of rock cutting using the discrete element method. Int J Rock Mech Min Sci 2011; 48(3): 434-42.
[http://dx.doi.org/10.1016/j.ijrmms.2010.08.012]
[11]
Zhang QQ, Han ZN, Zhang MQ, Zhang JG. Experimental and numerical study on the wear of conical pick under impact load. J Vib Shock 2016; 35(13): 58-65.
[12]
Gao KD, Du CL, Fu L, Jiang HX. Effect of mining face angle on drum loading performance using discrete element method. Int J Earth Sci Eng 2014; 7(1): 41-51.
[13]
Liu SY, Du CL, Cui XX, Li NN. Cutting experiment of the picks with different conicity and carbide tip diameters. J China Coal Soc 2009; 34(9): 1276-80.
[14]
Zhao LJ, Hu CM, Liu XN, Zhu S. Development and application of the computer-aided design and load calculation software of shearer drum. Computer Appl Softw 2016; 33(1): 60-4.
[15]
Chen HY, Bai YX, Mao J, Song Q. Nonlinear vibration of shearer in walk plane under multiple excitation. Mech Des Res 2016; 2: 166-70.
[16]
Pu ZD, Zhou SH, Ding DD. Dynamic simulation of traction drive system of coal mining machine based on RecurDyn. J Mech Strength 2016; 38(5): 1130-4.
[17]
Liu XN, Zhao LJ, Gao M, Le TY. Reliability analysis on planetary reduction mechanism based on combination of strength theory and virtual simulation. J Safety Sci Tech 2016; 12(2): 33-8.
[18]
Lian ZS, Liu KA. Virtual prototype of shearer ranging arm and its dynamics analysis. J China Coal Soc 2005; 30: 801-4.
[19]
Tian Z, Zhao LJ, Zhou WC, Ma LW. Application of discrete element technology to study on coal loading performances of spiral cutting drum. Coal Sci Tech 2018; 46(8): 135-9.
[20]
Liu SY, Du CL, Cui XX. Research on the cutting force of a pick. Min Sci Technol 2009; 19(4): 514-7.
[21]
Michael L. Cutter head for a long wall shearer. US20140265528 (2014).
[22]
Liu SY, Du CL, Xue YG, Li JP, Wang HX. A ladder shaped drum for deep well high stress coal and rock. CN104712334 (2015).
[23]
Li Z, Li J, Li XY, Wang XJ, Bi YK. A shearer drum with high lump coal rate. CN205654338 (2016).
[24]
Liu YF, Liu ZH, Wang HJ, Zhang Q. A kind of coal breaking spiral drum and shearer with vibration and impact. LU20160093438 (2016).
[25]
Wang SB, Wang SJ, Tian Y, Zhang BY. Method for controlling attitude of long wall mining shearer based on coal-seam geographic information system. AU2017363908 (2017).
[26]
Zhang Q, Tian Y, Liu YF. A kind of low energy consumption shearer drum. CN109057788 (2018).
[27]
Dai X, Tian Y. A new detachable continuous shearer drum. CN109025988 (2018).
[28]
Li LF. A kind of hob type spiral drum. CN108643903 (2018).
[29]
Zhao LJ, Tian Z, Shi BS, Liu XN. A kind of shearer's spiral drum used to cut coal with gangue. CN106640067 (2019).
[30]
Wang HJ, Zhang P, Zhang Q, Xie F, Liu L. A multi-stage pushing type of shearer cutting device. CN207960608 (2018).
[31]
Fan CX, Ji DF, Jiang LC. A shearer drum device connected by involute splines. CN209621310 (2019).
[32]
Zhang Q, Sun SA, Tian Y, Liu YF. A shearer drum without oblique cutting. CN109236288 (2019).
[33]
Ayhan M, Eyyuboglu EM. Comparison of globoid and cylindrical shearer drums’ loading performance. J South Afr Inst Min Metall 2006; 106(1): 51-6.
[34]
Hekimoglu OZ, Fowell RJ. Theoretical and practical aspects of circumferential pick spacing on boom tunnelling machine cutting heads. Min Sci Technol 1991; 13(3): 257-70.
[http://dx.doi.org/10.1016/0167-9031(91)90397-U]
[35]
Hekimoglu OZ, Ozdemir L. Effect of angle of wrap on cutting performance of drum shearers and continuous miners. Min Tech 2004; 113(2): 118-22.
[http://dx.doi.org/10.1179/037178404225004977]
[36]
Tong HL, Li Y, Jin Q, Li YS, Wang X. Study on loading performance of helix shearer drum based on partial least square method. Coal Mine Mach 2011; 11: 86-8.
[37]
Gao KD, Du CL, Dong J. Influence of the drum position parameters and the ranging arm thickness on the coal loading performance. Minerals 2015; 5(4): 723-36.
[http://dx.doi.org/10.3390/min5040520]
[38]
Gao KD, Du CL, Liu SY. Model test of helical angle effect on coal loading performance of shear drum. Int J Min Sci Technol 2012; 22(2): 165-8.
[http://dx.doi.org/10.1016/j.ijmst.2011.08.005]
[39]
Gao KD, Wang LP, Du CL. Research on the effect of dip angle in mining direction on drum loading performance: A discrete element method. Int J Adv Manuf Technol 2016; 89: 2323-34.
[http://dx.doi.org/10.1007/s00170-016-9251-7]
[40]
Gao KD, Xu WB, Jiang SB, Du CL. Factors affecting thin coal seam shearer drum coal-loading performance by a model test method. J Cent South Univ 2019; 26(6): 1619-36.
[http://dx.doi.org/10.1007/s11771-019-4117-4]
[41]
Zhao LJ, Tian Z, Bao WJ, Liu X. A new method of EDEM on thin seam shearer loading performance and application based on. J Mech Strength 2017; 39(3): 663-7.
[42]
Zhao LJ, Fan ZH, Zhou WC. Study on reliability of spiral drum in the breaking and falling process of coal and rock. J Safety Sci Tech 2017; 13(7): 100-5.
[43]
Tian Z, Zhao LJ, Liu XN, Ma L. Loading performance of spiral drum based on discrete element method. J China Coal Soc 2017; 42(10): 2758-64.
[44]
Zhao LJ, Fan JY, Li MH. Gradient reliability design of shearer’s drum in complicated seam J China Coal Soc 2018; 43(3): 870-7.
[45]
Zhao LJ, Jin ZF. Research on performance prediction of thin seam shearer by combining genetic algorithm with BP neural network. J Mech Strength 2018; 40(3): 620-5.
[46]
Tian Z, Gao S, Zhao LJ, Li J, Zhang CG. Research on coal loading performance of spiral drum under the conditions of multiple factors. J Henan Polytech Univ 2018; 37(6): 108-12.
[47]
Zhao LJ, Fan JY, Liu XJ, Wang YD. Exploring dynamic cutting process of shearer’s drum. Mech Sci Tech Eng 2019; 38(3): 386-91.
[48]
Liu CS, Zhao HM. Loading mechanism and capacity of spiral drum with axial slop blade. J Heilongjiang Inst Sci Tech 2007; 17(1): 15-8.
[49]
Zhao HM, Liu CS. Loading efficiency of spiral lean vanes for shearer drum. J Heilongjiang Inst Sci Tech 2008; 18(6): 403-6.
[50]
Liu CS, Yu NJ, Zhang YJ, Li YM. Mathematical model behind coal loading capacity of coal shearer drums in extremely thin coal seams and its evaluation. J Heilongjiang Inst Sci Tech 2019; 29(2): 156-61.
[51]
Zhao HM. Research on loading performance of lean vanes based on similarity for spiral drum. Mach Design Manu 2009; 7: 163-5.
[52]
Mao J, Liu XY, Chen HY, Song QS. Simulation of shearer drum cutting performance based on EDEM. J China Coal Soc 2019; 42(4): 1069-77.
[53]
Mao J, Liu XY, Chen HY, Song QS. Different installation angle of cutting picks affected to cutting performances of coal shearer. Coal Sc Tech 2017; 45(10): 144-9.
[54]
Mao J, Wang X, Chen H, Zhang K, Bai Y. Optimization design and system development of shearer drums based on NSGA-III algorithm. China Mech Eng 2018; 29(19): 2335-41.
[55]
Mao J, Liu XY, Chen HY, Song QS. Simulation study on the effect of coal seam dip angle on drum work performance. J Mech Strength 2019; 41(3): 673-81.
[56]
Yang CW, Guo JH, Wang ZM, Liu Y, Wang J, Tong XH. Fluid-solid coupling modeling method based on EDEM-FLUENT discrete element. CN110046388 (2019).
[57]
Ma T, Fan JW, Xue ZC, Peng CW. A method based on discrete element method to obtain the vibration compaction value of cohesionless subgrade soil. CN109918843 (2019).
[58]
Zhou G, Xu M, Qiu L, Ma YL, Feng B, Wang JY. A seepage simulation method based on CT reconstruction of finite element and discrete element. CN106960070 (2017).
[59]
Wang XY, Wu WD, Bai JB, Xia JW, Wu BW, Liu SG. A discrete element method for simulating the fracture evolution of surrounding rock of roadway. CN110390152 (2019).
[60]
Tian Z, Gao S, Li J, Zhang CG, Xie JJ, Zhu B. A comprehensive performance evaluation method of coal plough based on discrete element method. CN109766653 (2019).
[61]
Zhao W, Zhang HL, Lu D, Niu XM. Measures of improving coal loading effect in low seam shearer. Coal Mine Mach 2015; 36(6): 204-7.
[62]
Baraldi D, Cecchi A, Foraboschi P. Broken tempered laminated glass: Non-linear discrete element modeling. Compos Struct 2016; 140: 278-95.
[http://dx.doi.org/10.1016/j.compstruct.2015.12.050]
[63]
Le BD, Koval G, Chazallon C. Discrete element model for crack propagation in brittle materials. Int J Numer Anal Meth 2016; 40(4): 583-95.
[http://dx.doi.org/10.1002/nag.2417]
[64]
Yao M, Anandarajah A. Three-dimensional discrete element method of analysis of clays. J Eng Mech 2003; 129(6): 585-96.
[http://dx.doi.org/10.1061/(ASCE)0733-9399(2003)129:6(585)]
[65]
Gallagher RH, Padlog J. Discrete element approach to structural instability analysis. AIAA J 2015; 1(6): 1437-9.
[http://dx.doi.org/10.2514/3.1825]
[66]
Leblicq T, Vanmaercke S, Ramon H, Saeys W. Discrete element modelling of bendable tubes. Int J Mech Sci 2015; 94(5): 75-83.
[http://dx.doi.org/10.1016/j.ijmecsci.2015.02.017]
[67]
Gao F, Stead D. Discrete element modelling of cutter roof failure in coal mine roadways. Int J Coal Geol 2013; 116: 158-71.
[http://dx.doi.org/10.1016/j.coal.2013.07.020]
[68]
Xie YS, Zhao YS. Numerical simulation of the top coal caving process using the discrete element method. Int J Rock Mech Min 2009; 46(6): 983-91.
[http://dx.doi.org/10.1016/j.ijrmms.2009.03.005]
[69]
Lee HP, Olson JE, Schultz RA. Interaction analysis of propagating opening mode fractures with veins using the discrete element method. Int J Rock Mech Min 2018; 103: 275-88.
[http://dx.doi.org/10.1016/j.ijrmms.2018.01.005]
[70]
Xu ZJ, Tartakovsky AM, Pan W. Discrete element model for the interaction between ocean waves and sea ice. Phys Rev E Stat Nonlin Soft Matter Phys 2018; 85(2): 1-8.
[http://dx.doi.org/10.1103/PhysRevE.85.016703] [PMID: 22400697]
[71]
Shi L, Zhao W, Sun W. Parameter calibration of soil particles contact model of farmland soil in northwest arid region based on discrete element method. Trans Chin Soc Agr Eng 2017; 33(21): 181-7.
[72]
Nezami EG, Hashash YMA, Zhao D, Ghaboussi J. Simulation of front end loader bucket-soil interaction using discrete element method. Int J Numer Anal Met 2007; 31(9): 1147-62.
[http://dx.doi.org/10.1002/nag.594]
[73]
Wang S, Zheng ZS. Discrete element method for high temperature spread in compacted powder systems. Particuology 2017; 31(2): 49-53.
[http://dx.doi.org/10.1016/j.partic.2016.02.005]
[74]
Sakai M, Yamada Y, Shigeto Y, Shibata K, Kawasaki VM, Koshizuka S. Large-scale discrete element modeling in a fluidized bed. Int J Numer Me Fl 2010; 64(10-12): 1319-35.
[http://dx.doi.org/10.1002/fld.2364]
[75]
Celigueta MA, Latorre S, Arrufat F, Onate E. Accurate modelling of the elastic behavior of a continuum with the discrete element method. Comput Mech 2017; 60(1): 1-14.
[http://dx.doi.org/10.1007/s00466-017-1453-9]
[76]
Shen WG, Zhao T, Crosta G, Dai F. Analysis of impact-induced rock fragmentation using a discrete element approach. Int J Rock Mech Min Sci 2017; 98: 33-8.
[http://dx.doi.org/10.1016/j.ijrmms.2017.07.014]
[77]
Olsson E, Jelagin D. A contact model for the normal force between viscoelastic particles in discrete element simulations. Powder Technol 2019; 342: 985-91.
[http://dx.doi.org/10.1016/j.powtec.2018.10.022]
[78]
Olsson E, Larsson PL. On the effect of particle size distribution in cold powder compaction. J Appl Mech-T ASME 2012; 79(5): 1-8.
[http://dx.doi.org/10.1115/1.4006382]
[79]
Olsson E, Larsson PL. A numerical analysis of cold powder compaction based on micromechanical experiments. Powder Technol 2013; 243: 71-8.
[http://dx.doi.org/10.1016/j.powtec.2013.03.040]
[80]
Olsson E, Larsson PL. On the tangential contact behavior at elastic-plastic spherical contact problems. Wear 2014; 319(1-2): 110-7.
[http://dx.doi.org/10.1016/j.wear.2014.07.016]
[81]
Olsson E, Larsson PL. Micromechanical investigation of the fracture behavior of powder materials. Powder Technol 2015; 286: 288-302.
[http://dx.doi.org/10.1016/j.powtec.2015.08.018]
[82]
Bi YZ, Du YJ, He SM, Sun XP, Wang DP, Li XP, et al. Numerical analysis of effect of baffle configuration on impact force exerted from rock avalanches. Landslides 2018; 3: 1-15.
[http://dx.doi.org/10.1007/s10346-018-0979-z]
[83]
Huang H, Detournay E. Discrete element modeling of tool-rock interaction II: rock indentation. Int J Numer Anal Met 2013; 37(13): 1913-29.
[http://dx.doi.org/10.1002/nag.2113]
[84]
Tao L, Jiang M, Thornton C. Three-dimensional discrete element analysis of triaxial tests and wetting tests on unsaturated compacted silt. Comput Geotech 2018; 97: 90-102.
[http://dx.doi.org/10.1016/j.compgeo.2017.12.011]
[85]
Calantoni J, Seyfarth A, Jordan PM, Keiffer RS. Discrete element method simulations for acoustic propagation through idealized seafloor sediments. J Acoust Soc Am 2017; 142(4): 2526.
[http://dx.doi.org/10.1121/1.5014233] [PMID: 29092605]

Rights & Permissions Print Cite
Article Metrics
4
1
© 2024 Bentham Science Publishers | Privacy Policy