Login Register Cart 0
Generic placeholder image

Current Dentistry

Editor-in-Chief

ISSN (Print): 2542-579X
ISSN (Online): 2542-5803

Back
Journal Home About Journal Editorial Board Current Issue Volumes/Issues
Subscribe
Mini-Review Article

Factors Affecting the Wear Behavior of Monolithic Zirconia and the Antagonists: Literature Review

Author(s): Marcia Borba*, Paula Benetti, Giordana P. Furini, Kátia R. Weber and Tábata M. da Silva

Volume 2, Issue 1, 2020

Page: [4 - 11] Pages: 8

DOI: 10.2174/2542579X02666200206111259

Price: $65

Abstract

Background: The use of zirconia-based ceramics to produce monolithic restorations has increased due to improvements in the optical properties of the materials. Traditionally, zirconiabased ceramics were veneered with porcelain or glass-ceramic and were not directly exposed to the oral environment. Therefore, there are several doubts regarding the wear of the monolithic zirconia restoration and their antagonists. Additionally, different surface treatments are recommended to promote a smooth surface, including glaze and several polishing protocols. To support the correct clinical application, it is important to understand the advantages and limitations of each surface treatment.

Objective: The aim of this short literature review is to investigate the factors that may affect the wear of monolithic zirconia restorations in service and their antagonists.

Methods: Pubmed/Medline database was accessed to review the literature from a 10-year period using the keywords: zirconia, monolithic, prosthesis, wear. Both clinical and in vitro studies were included in the review.

Results: Studies investigated the effect of several surface treatments, including grinding with diamond- burs, polishing and glazing, on the surface roughness, phase transformation and wear capacity of monolithic zirconia. The wear behavior of monolithic zirconia was frequently compared to the wear behavior of other ceramics, such as feldspathic porcelain, lithium disilicate-based glassceramic and leucite-reinforced glass-ceramic. Human tooth, ceramics and resin composites were used as antagonist in the investigations. Only short-term clinical studies are available (up to 2 years).

Conclusion: Literature findings suggest that zirconia monolithic restorations are wear resistant and unlikely to cause excessive wear to the antagonist, especially when compared to feldspathic porcelain and glass-ceramics. Monolithic zirconia should be polished rather than glazed. Yet, none of the polishing systems studied was able to completely restore the initial surface conditions of zirconia after being adjusted with burs. More clinical evidence of the antagonist tooth wear potential of monolithic zirconia is needed.

Keywords: Dental wear, occlusal wear, ceramics, dental prosthesis, tooth abrasion, tooth attrition.

Graphical Abstract

[1]
Kelly JR, Benetti P. Ceramic materials in dentistry: historical evolution and current practice. Aust Dent J 2011; 56(Suppl. 1): 84-96.
[http://dx.doi.org/10.1111/j.1834-7819.2010.01299.x ] [PMID: 21564119]
[2]
Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008; 24(3): 299-307.
[http://dx.doi.org/10.1016/j.dental.2007.05.007 ] [PMID: 17659331]
[3]
Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater 2008; 24(3): 289-98.
[http://dx.doi.org/10.1016/j.dental.2007.05.005 ] [PMID: 17624420]
[4]
Borba M, de Araújo MD, Fukushima KA, et al. Effect of the microstructure on the lifetime of dental ceramics. Dent Mater 2011; 27(7): 710-21.
[http://dx.doi.org/10.1016/j.dental.2011.04.003 ] [PMID: 21536324]
[5]
Zhang Y, Lawn BR. Evaluating dental zirconia. Dent Mater 2018.
[PMID: 30172379]
[6]
Zhang Y, Lawn BR. Novel Zirconia Materials in Dentistry. J Dent Res 2018; 97(2): 140-7.
[http://dx.doi.org/10.1177/0022034517737483 ] [PMID: 29035694]
[7]
Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part I: core materials. J Prosthet Dent 2002; 88(1): 4-9.
[http://dx.doi.org/10.1067/mpr.2002.126794 ] [PMID: 12239472]
[8]
Chevalier J. What future for zirconia as a biomaterial? Biomaterials 2006; 27(4): 535-43.
[http://dx.doi.org/10.1016/j.biomaterials.2005.07.034] [PMID: 16143387]
[9]
Borba M, de Araújo MD, de Lima E, et al. Flexural strength and failure modes of layered ceramic structures. Dent Mater 2011; 27(12): 1259-66.
[http://dx.doi.org/10.1016/j.dental.2011.09.008 ] [PMID: 21982199]
[10]
Meirelles PD, Spigolon YO, Borba M, Benetti P. Leucite and cooling rate effect on porcelain-zirconia mechanical behavior. Dent Mater 2016; 32(12): e382-8.
[http://dx.doi.org/10.1016/j.dental.2016.09.018 ] [PMID: 27707502]
[11]
Borba M, Duan Y, Griggs JA, Cesar PF, Della Bona Á. Effect of ceramic infrastructure on the failure behavior and stress distribution of fixed partial dentures. Dent Mater 2015; 31(4): 413-22.
[http://dx.doi.org/10.1016/j.dental.2015.01.008 ] [PMID: 25657090]
[12]
Heffernan MJ, Aquilino SA, Diaz-Arnold AM, Haselton DR, Stanford CM, Vargas MA. Relative translucency of six all-ceramic systems. Part II: core and veneer materials. J Prosthet Dent 2002; 88(1): 10-5.
[http://dx.doi.org/10.1067/mpr.2002.126795 ] [PMID: 12239473]
[13]
Basso GR, Moraes RR, Borba M, Duan Y, Griggs JA, Della Bona A. Reliability and failure behavior of CAD-on fixed partial dentures. Dent Mater 2016; 32(5): 624-30.
[http://dx.doi.org/10.1016/j.dental.2016.01.013 ] [PMID: 26897479]
[14]
Alessandretti R, Borba M, Benetti P, Corazza PH, Ribeiro R, Della Bona A. Reliability and mode of failure of bonded monolithic and multilayer ceramics. Dent Mater 2017; 33(2): 191-7.
[http://dx.doi.org/10.1016/j.dental.2016.11.014 ] [PMID: 27986280]
[15]
Basso GR, Kodama AB, Pimentel AH, et al. Masking Colored Substrates Using Monolithic and Bilayer CAD-CAM Ceramic Structures. Oper Dent 2017; 42(4): 387-95.
[http://dx.doi.org/10.2341/16-247-L ] [PMID: 28402734]
[16]
Pjetursson BE, Sailer I, Makarov NA, Zwahlen M, Thoma DS. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs. Dent Mater 2015; 31(6): 624-39.
[http://dx.doi.org/10.1016/j.dental.2015.02.013 ] [PMID: 25935732]
[17]
Sailer I, Makarov NA, Thoma DS, Zwahlen M, Pjetursson BE. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs). Dent Mater 2015; 31(6): 603-23.
[http://dx.doi.org/10.1016/j.dental.2015.02.011 ] [PMID: 25842099]
[18]
Pang Z, Chughtai A, Sailer I, Zhang Y. A fractographic study of clinically retrieved zirconia-ceramic and metal-ceramic fixed dental prostheses. Dent Mater 2015; 31(10): 1198-206.
[http://dx.doi.org/10.1016/j.dental.2015.07.003 ] [PMID: 26233469]
[19]
Kim J, Dhital S, Zhivago P, Kaizer MR, Zhang Y. Viscoelastic finite element analysis of residual stresses in porcelain-veneered zirconia dental crowns. J Mech Behav Biomed Mater 2018; 82: 202-9.
[http://dx.doi.org/10.1016/j.jmbbm.2018.03.020 ] [PMID: 29621687]
[20]
Rinke S, Wehle J, Schulz X, Bürgers R, Rödiger M. Prospective Evaluation of Posterior Fixed Zirconia Dental Prostheses: 10-Year Clinical Results. Int J Prosthodont 2018; 31(1): 35-42.
[http://dx.doi.org/10.11607/ijp.5283 ] [PMID: 29316569]
[21]
Zhang F, Inokoshi M, Batuk M, et al. Strength, toughness and aging stability of highly-translucent Y-TZP ceramics for dental restorations. Dent Mater 2016; 32(12): e327-37.
[http://dx.doi.org/10.1016/j.dental.2016.09.025 ] [PMID: 27697332]
[22]
Camposilvan E, Leone R, Gremillard L, et al. Aging resistance, mechanical properties and translucency of different yttria-stabilized zirconia ceramics for monolithic dental crown applications. Dent Mater 2018; 34(6): 879-90.
[http://dx.doi.org/10.1016/j.dental.2018.03.006 ] [PMID: 29598882]
[23]
Stawarczyk B, Frevert K, Ender A, Roos M, Sener B, Wimmer T. Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear. J Mech Behav Biomed Mater 2016; 59: 128-38.
[http://dx.doi.org/10.1016/j.jmbbm.2015.11.040 ] [PMID: 26751707]
[24]
Mao L, Kaizer MR, Zhao M, Guo B, Song YF, Zhang Y. Graded ultra-translucent zirconia (5y-psz) for strength and functionalities. J Dent Res 2018; 97(11): 1222-8.
[http://dx.doi.org/10.1177/0022034518771287 ] [PMID: 29694258]
[25]
Yan J, Kaizer MR, Zhang Y. Load-bearing capacity of lithium disilicate and ultra-translucent zirconias. J Mech Behav Biomed Mater 2018; 88: 170-5.
[http://dx.doi.org/10.1016/j.jmbbm.2018.08.023 ] [PMID: 30173069]
[26]
Zhang F, Reveron H, Spies BC, Van Meerbeek B, Chevalier J. Trade-off between fracture resistance and translucency of zirconia and lithium-disilicate glass ceramics for monolithic restorations. Acta Biomater 2019; 91: 24-34.
[http://dx.doi.org/10.1016/j.actbio.2019.04.043 ] [PMID: 31034947]
[27]
Ren L, Janal MN, Zhang Y. Sliding contact fatigue of graded zirconia with external esthetic glass. J Dent Res 2011; 90(9): 1116-21.
[http://dx.doi.org/10.1177/0022034511412075 ] [PMID: 21666105]
[28]
Zhang Y, Chai H, Lawn BR. Graded structures for all-ceramic restorations. J Dent Res 2010; 89(4): 417-21.
[http://dx.doi.org/10.1177/0022034510363245 ] [PMID: 20200413]
[29]
Zhang Y, Chai H, Lee JJ, Lawn BR. Chipping resistance of graded zirconia ceramics for dental crowns. J Dent Res 2012; 91(3): 311-5.
[http://dx.doi.org/10.1177/0022034511434356 ] [PMID: 22232142]
[30]
Zhang Y, Kim JW. Graded structures for damage resistant and aesthetic all-ceramic restorations. Dent Mater 2009; 25(6): 781-90.
[http://dx.doi.org/10.1016/j.dental.2009.01.002 ] [PMID: 19187955]
[31]
Zhang Y, Ma L. Optimization of ceramic strength using elastic gradients. Acta Mater 2009; 57(9): 2721-9.
[http://dx.doi.org/10.1016/j.actamat.2009.02.037 ] [PMID: 20161019]
[32]
Zhang Y, Sun MJ, Zhang D. Designing functionally graded materials with superior load-bearing properties. Acta Biomater 2012; 8(3): 1101-8.
[http://dx.doi.org/10.1016/j.actbio.2011.11.033 ] [PMID: 22178651]
[33]
Kolakarnprasert N, Kaizer MR, Kim DK, Zhang Y. New multi-layered zirconias: Composition, microstructure and translucency. Dent Mater 2019; 35(5): 797-806.
[http://dx.doi.org/10.1016/j.dental.2019.02.017 ] [PMID: 30853208]
[34]
Ueda K, Güth JF, Erdelt K, Stimmelmayr M, Kappert H, Beuer F. Light transmittance by a multi-coloured zirconia material. Dent Mater J 2015; 34(3): 310-4.
[http://dx.doi.org/10.4012/dmj.2014-238 ] [PMID: 25904173]
[35]
Zhang Y. Making yttria-stabilized tetragonal zirconia translucent. Dent Mater 2014; 30(10): 1195-203.
[http://dx.doi.org/10.1016/j.dental.2014.08.375 ] [PMID: 25193781]
[36]
Heintze SD. How to qualify and validate wear simulation devices and methods. Dent Mater 2006; 22(8): 712-34.
[http://dx.doi.org/10.1016/j.dental.2006.02.002 ] [PMID: 16574212]
[37]
Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. Wear of ceramic and antagonist--a systematic evaluation of influencing factors in vitro. Dent Mater 2008; 24(4): 433-49.
[http://dx.doi.org/10.1016/j.dental.2007.06.016 ] [PMID: 17720238]
[38]
Heintze SD, Cavalleri A, Forjanic M, Zellweger G, Rousson V. A comparison of three different methods for the quantification of the in vitro wear of dental materials. Dent Mater 2006; 22(11): 1051-62.
[http://dx.doi.org/10.1016/j.dental.2005.08.010 ] [PMID: 16386293]
[39]
Heintze SD, Faouzi M, Rousson V, Ozcan M. Correlation of wear in vivo and six laboratory wear methods. Dent Mater 2012; 28(9): 961-73.
[http://dx.doi.org/10.1016/j.dental.2012.04.006 ] [PMID: 22698644]
[40]
Peng Z, Izzat Abdul Rahman M, Zhang Y, Yin L. Wear behavior of pressable lithium disilicate glass ceramic. J Biomed Mater Res B Appl Biomater 2016; 104(5): 968-78.
[http://dx.doi.org/10.1002/jbm.b.33447 ] [PMID: 25980530]
[41]
Heintze SD, Zappini G, Rousson V. Wear of ten dental restorative materials in five wear simulators--results of a round robin test. Dent Mater 2005; 21(4): 304-17.
[http://dx.doi.org/10.1016/j.dental.2004.05.003 ] [PMID: 15766577]
[42]
Heintze SD, Zellweger G, Cavalleri A, Ferracane J. Influence of the antagonist material on the wear of different composites using two different wear simulation methods. Dent Mater 2006; 22(2): 166-75.
[http://dx.doi.org/10.1016/j.dental.2005.04.012 ] [PMID: 16087228]
[43]
Zurek AD, Alfaro MF, Wee AG, et al. Wear Characteristics and Volume Loss of CAD/CAM Ceramic Materials. J Prosthodont 2019; 28(2): e510-8.
[http://dx.doi.org/10.1111/jopr.12782 ] [PMID: 29508487]
[44]
Heintze SD, Reichl FX, Hickel R. Wear of dental materials: Clinical significance and laboratory wear simulation methods -A review. Dent Mater J 2019; 38(3): 343-53.
[http://dx.doi.org/10.4012/dmj.2018-140 ] [PMID: 30918233]
[45]
Amer R, Kürklü D, Kateeb E, Seghi RR. Three-body wear potential of dental yttrium-stabilized zirconia ceramic after grinding, polishing, and glazing treatments. J Prosthet Dent 2014; 112(5): 1151-5.
[http://dx.doi.org/10.1016/j.prosdent.2013.12.021 ] [PMID: 24836531]
[46]
Preis V, Schmalzbauer M, Bougeard D, Schneider-Feyrer S, Rosentritt M. Surface properties of monolithic zirconia after dental adjustment treatments and in vitro wear simulation. J Dent 2015; 43(1): 133-9.
[http://dx.doi.org/10.1016/j.jdent.2014.08.011 ] [PMID: 25174949]
[47]
Mores RT, Borba M, Corazza PH, Della Bona Á, Benetti P. Influence of surface finishing on fracture load and failure mode of glass ceramic crowns. J Prosthet Dent 2017; 118(4): 511-6.
[http://dx.doi.org/10.1016/j.prosdent.2016.12.012 ] [PMID: 28343675]
[48]
Amer R, Kürklü D, Johnston W. Effect of simulated mastication on the surface roughness of three ceramic systems. J Prosthet Dent 2015; 114(2): 260-5.
[http://dx.doi.org/10.1016/j.prosdent.2015.02.018 ] [PMID: 25957241]
[49]
Rupawala A, Musani SI, Madanshetty P, Dugal R, Shah UD, Sheth EJ. A study on the wear of enamel caused by monolithic zirconia and the subsequent phase transformation compared to two other ceramic systems. J Indian Prosthodont Soc 2017; 17(1): 8-14.
[PMID: 28216839]
[50]
Kaizer MR, Gierthmuehlen PC, Dos Santos MB, Cava SS, Zhang Y. Speed sintering translucent zirconia for chairside one-visit dental restorations: Optical, mechanical, and wear characteristics. Ceram Int 2017; 43(14): 10999-1005.
[http://dx.doi.org/10.1016/j.ceramint.2017.05.141 ] [PMID: 29097830]
[51]
Amaya-Pajares SP, Ritter AV, Vera Resendiz C, Henson BR, Culp L, Donovan TE. Effect of Finishing and Polishing on the Surface Roughness of Four Ceramic Materials after Occlusal Adjustment. J Esthet Restor Dent 2016; 28(6): 382-96.
[http://dx.doi.org/10.1111/jerd.12222 ] [PMID: 27264939]
[52]
Kaizer MR, Bano S, Borba M, Garg V, Dos Santos MBF, Zhang Y. Wear Behavior of Graded Glass/Zirconia Crowns and Their Antagonists. J Dent Res 2019; 98(4): 437-42.
[http://dx.doi.org/10.1177/0022034518820918 ] [PMID: 30744472]
[53]
Kaizer MR, Moraes RR, Cava SS, Zhang Y. The progressive wear and abrasiveness of novel graded glass/zirconia materials relative to their dental ceramic counterparts. Dent Mater 2019; 35(5): 763-71.
[http://dx.doi.org/10.1016/j.dental.2019.02.022 ] [PMID: 30827797]
[54]
Al-Haj Husain N, Camilleri J, Özcan M. Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis. J Mech Behav Biomed Mater 2016; 64: 104-12.
[http://dx.doi.org/10.1016/j.jmbbm.2016.07.025 ] [PMID: 27497266]
[55]
Denry IL, Holloway JA. Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res B Appl Biomater 2006; 76(2): 440-8.
[http://dx.doi.org/10.1002/jbm.b.30382 ] [PMID: 16184529]
[56]
Coldea A, Fischer J, Swain MV, Thiel N. Damage tolerance of indirect restorative materials (including PICN) after simulated bur adjustments. Dent Mater 2015; 31(6): 684-94.
[http://dx.doi.org/10.1016/j.dental.2015.03.007 ] [PMID: 25858782]
[57]
Borba M, de Araújo MD, Fukushima KA, et al. Effect of different aging methods on the mechanical behavior of multi-layered ceramic structures. Dent Mater 2016; 32(12): 1536-42.
[http://dx.doi.org/10.1016/j.dental.2016.09.005 ] [PMID: 27726968]
[58]
Denry IL, Peacock JJ, Holloway JA. Effect of heat treatment after accelerated aging on phase transformation in 3Y-TZP. J Biomed Mater Res B Appl Biomater 2010; 93(1): 236-43.
[http://dx.doi.org/10.1002/jbm.b.31580 ] [PMID: 20091919]
[59]
Vicari CB, Magalhães BO, Griggs JA, Borba M. Fatigue behavior of crystalline-reinforced glass-ceramic. J Prosthodont 2019; 28(1): e297-303.
[http://dx.doi.org/10.1111/jopr.12739 ] [PMID: 29315956]
[60]
Della Bona A, Mecholsky JJ Jr, Anusavice KJ. Fracture behavior of lithia disilicate- and leucite-based ceramics. Dent Mater 2004; 20(10): 956-62.
[http://dx.doi.org/10.1016/j.dental.2004.02.004 ] [PMID: 15501324]
[61]
Belli R, Wendler M, de Ligny D, et al. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater 2017; 33(1): 84-98.
[http://dx.doi.org/10.1016/j.dental.2016.10.009 ] [PMID: 27890354]
[62]
Wendler M, Belli R, Petschelt A, et al. Chairside CAD/CAM materials. Part 2: Flexural strength testing. Dent Mater 2017; 33(1): 99-109.
[http://dx.doi.org/10.1016/j.dental.2016.10.008 ] [PMID: 27884403]
[63]
Kim MJ, Oh SH, Kim JH, et al. Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains. J Dent 2012; 40(11): 979-88.
[http://dx.doi.org/10.1016/j.jdent.2012.08.004 ] [PMID: 22892464]
[64]
Sripetchdanond J, Leevailoj C. Wear of human enamel opposing monolithic zirconia, glass ceramic, and composite resin: an in vitro study. J Prosthet Dent 2014; 112(5): 1141-50.
[http://dx.doi.org/10.1016/j.prosdent.2014.05.006 ] [PMID: 24980740]
[65]
Choi JW, Bae IH, Noh TH, et al. Wear of primary teeth caused by opposed all-ceramic or stainless steel crowns. J Adv Prosthodont 2016; 8(1): 43-52.
[http://dx.doi.org/10.4047/jap.2016.8.1.43 ] [PMID: 26949487]
[66]
Tong H, Tanaka CB, Kaizer MR, Zhang Y. Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area. Ceram Int 2016; 42(1 Pt B): 1077-85.
[http://dx.doi.org/10.1016/j.ceramint.2015.09.033 ] [PMID: 26664123]
[67]
Turon-Vinas M, Anglada M. Strength and fracture toughness of zirconia dental ceramics. Dent Mater 2018; 34(3): 365-75.
[http://dx.doi.org/10.1016/j.dental.2017.12.007 ] [PMID: 29395472]
[68]
Zhang Y, Lee JJ, Srikanth R, Lawn BR. Edge chipping and flexural resistance of monolithic ceramics. Dent Mater 2013; 29(12): 1201-8.
[http://dx.doi.org/10.1016/j.dental.2013.09.004 ] [PMID: 24139756]
[69]
D’Arcangelo C, Vanini L, Rondoni GD, Vadini M, De Angelis F. Wear Evaluation of Prosthetic Materials Opposing Themselves. Oper Dent 2018; 43(1): 38-50.
[http://dx.doi.org/10.2341/16-212-L ] [PMID: 28857711]
[70]
Ho TK, Satterthwaite JD, Silikas N. The effect of chewing simulation on surface roughness of resin composite when opposed by zirconia ceramic and lithium disilicate ceramic. Dent Mater 2018; 34(2): e15-24.
[http://dx.doi.org/10.1016/j.dental.2017.11.014 ] [PMID: 29175160]
[71]
Dupriez ND, von Koeckritz AK, Kunzelmann KH. A comparative study of sliding wear of nonmetallic dental restorative materials with emphasis on micromechanical wear mechanisms. J Biomed Mater Res B Appl Biomater 2015; 103(4): 925-34.
[http://dx.doi.org/10.1002/jbm.b.33193 ] [PMID: 25303041]
[72]
Shortall AC, Hu XQ, Marquis PM. Potential countersample materials for in vitro simulation wear testing. Dent Mater 2002; 18(3): 246-54.
[http://dx.doi.org/10.1016/S0109-5641(01)00043-4 ] [PMID: 11823017]
[73]
Preis V, Behr M, Kolbeck C, Hahnel S, Handel G, Rosentritt M. Wear performance of substructure ceramics and veneering porcelains. Dent Mater 2011; 27(8): 796-804.
[http://dx.doi.org/10.1016/j.dental.2011.04.001 ] [PMID: 21524788]
[74]
Benetti AR, Larsen L, Dowling AH, Fleming GJ. Assessment of wear facets produced by the ACTA wear machine. J Dent 2016; 45: 19-25.
[http://dx.doi.org/10.1016/j.jdent.2015.12.003 ] [PMID: 26690332]
[75]
Fleming GJ, Reilly E, Dowling AH, Addison O. Data acquisition variability using profilometry to produce accurate mean total volumetric wear and mean maximum wear depth measurements for the OHSU oral wear simulator. Dent Mater 2016; 32(8): e176-84.
[http://dx.doi.org/10.1016/j.dental.2016.05.004 ] [PMID: 27283996]
[76]
El Zhawi H, Kaizer MR, Chughtai A, Moraes RR, Zhang Y. Polymer infiltrated ceramic network structures for resistance to fatigue fracture and wear. Dent Mater 2016; 32(11): 1352-61.
[http://dx.doi.org/10.1016/j.dental.2016.08.216 ] [PMID: 27585486]
[77]
Stober T, Heuschmid N, Zellweger G, Rousson V, Rues S, Heintze SD. Comparability of clinical wear measurements by optical 3D laser scanning in two different centers. Dent Mater 2014; 30(5): 499-506.
[http://dx.doi.org/10.1016/j.dental.2014.02.001 ] [PMID: 24612841]
[78]
Gou M, Chen H, Kang J, Wang H. Antagonist enamel wear of tooth-supported monolithic zirconia posterior crowns in vivo: A systematic review. J Prosthet Dent 2018.
[PMID: 30509545]
[79]
Mundhe K, Jain V, Pruthi G, Shah N. Clinical study to evaluate the wear of natural enamel antagonist to zirconia and metal ceramic crowns. J Prosthet Dent 2015; 114(3): 358-63.
[http://dx.doi.org/10.1016/j.prosdent.2015.03.001 ] [PMID: 25985742]
[80]
Esquivel-Upshaw JF, Kim MJ, Hsu SM, et al. Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns. J Dent 2018; 68: 19-27.
[http://dx.doi.org/10.1016/j.jdent.2017.10.005 ] [PMID: 29042241]
[81]
Lohbauer U, Reich S. Antagonist wear of monolithic zirconia crowns after 2 years. Clin Oral Investig 2017; 21(4): 1165-72.
[http://dx.doi.org/10.1007/s00784-016-1872-6 ] [PMID: 27277661]
[82]
Stober T, Bermejo JL, Schwindling FS, Schmitter M. Clinical assessment of enamel wear caused by monolithic zirconia crowns. J Oral Rehabil 2016; 43(8): 621-9.
[http://dx.doi.org/10.1111/joor.12409 ] [PMID: 27198539]
[83]
Hartkamp O, Peters F, Bothung H, Lohbauer U, Reich S. Optical profilometry versus intraoral (handheld) scanning. Int J Comput Dent 2017; 20(2): 165-76.
[PMID: 28630957]
[84]
Zhang F, Spies BC, Vleugels J, et al. High-translucent yttria-stabilized zirconia ceramics are wear-resistant and antagonist-friendly. Dent Mater 2019; 35(12): 1776-90.
[http://dx.doi.org/10.1016/j.dental.2019.10.009 ] [PMID: 31727445]

Rights & Permissions Print Cite
Article Metrics
62
1
© 2024 Bentham Science Publishers | Privacy Policy