Login Register Cart 0
Generic placeholder image

Recent Patents on Engineering

Editor-in-Chief

ISSN (Print): 1872-2121
ISSN (Online): 2212-4047

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
General Research Article

Influence of Electromagnetic Characteristics of Shell Materials on Motor Performance

Author(s): Xinhua Zheng, Yanan Xu* and Junfeng Sun

Volume 15, Issue 1, 2021

Published on: 10 December, 2019

Page: [101 - 106] Pages: 6

DOI: 10.2174/1872212113666191210162316

Price: $65

Abstract

Background: In this paper, a two-pole 3 kW three-phase induction motor is taken as an example to establish a two-dimensional finite element model. The correctness of the model is verified by comparing the finite element calculation data with the experimental data.

Methods: On this basis, the influence of electromagnetic characteristics of different shell materials on the motor yoke saturation degree, loss, current and power factor are studied, it is determined that the motor yoke saturation degree is the key factor affecting the power factor, current and loss of the motor. The influence of different stator yoke thickness on the saturation degree of motor stator yoke with the same shell material is further studied. The influences of motor stator yoke saturation degree on motor current, loss and power factor are obtained when the stator yoke thickness is different.

Results: The optimum range of motor current, loss and power factor is obtained.

Conclusion: Finally, by comparing the different shell materials to optimize the motor structure size, it is determined that the motor stator yoke thickness can be reduced by using cast iron shell, and the motor materials consumption can be saved to provide reference for motor optimization design.

Keywords: Three-phase induction motor, stator yoke thickness, cast iron shell, cast aluminum shell, copper loss, power factor.

Graphical Abstract

[1]
E. Lucian-Vasile, and S. Diana-Ramona, "Electric drive system for speed adjusting of a three-phase asynchronous motor using a PLC for propelling an electric vehicle", In: 2017 10th International Symposium on Advanced Topics in Electrical Engineering (ATEE), Bucharest, Romania, 2017, pp 597- 600.
[http://dx.doi.org/10.1109/ATEE.2017.7905175]
[2]
A. Nabil, "Three Phase Induction Motor Operating from Single Phase Supply With An Electronically Controlled Capacitor", Int. J. Emerg. Technol. Adv. Eng., vol. 2, pp. 523-528, 2012.
[3]
V.V. Kharlamov, Y.V. Moskalev, and V.S. Lysenko, Connection Three-Phase Winding of the Induction Motor to a Single-Phase Electrical Network In: 2018 Dynamics of Systems, Mechanisms and Machines.. Dynamics: Omsk, Russia, 2018, pp. 1-4..
[4]
N. Kunihiro, K. Nishihama, M. Iizuka, K. Sugimoto, and M. Sawahata, "Investigation Into Loss Reduced Rotor Slot Structure by Analyzing Local Behaviors of Harmonic Magnetic Fluxes in Inverter-Fed Induction Motor", IEEE Trans. Ind. Appl., vol. 53, no. 2, pp. 1070-1077, 2017.
[http://dx.doi.org/10.1109/TIA.2016.2642481]
[5]
F.J.T.E. Ferreira, and A.T. de Almeida, "Method for in-field evaluation of the stator winding connection of three-phase induction motors to maximize efficiency and power factor", IEEE Trans. Energ. Convers., vol. 21, no. 2, pp. 370-379, 2006.
[http://dx.doi.org/10.1109/TEC.2006.874248]
[6]
G. Vertesy, T. Uchimoto, T. Takagi, and I. Tomas, "Flake Graphite Cast Iron Investigated by a Magnetic Method", IEEE Trans. Magn., vol. 50, no. 4, pp. 1-4, 2014.
[http://dx.doi.org/10.1109/TMAG.2013.2283915]
[7]
Y. Liu, Casting technology for motor shell C. N. Patent108817325..
[8]
"High heat conduction motor shell of high strength", C. N. Patent 207910597.,
[9]
K.K. Schwarz, "Survey of basic stray losses in squirrel-cage induction motors", Proc. IEE, vol. 111, 1964pp. 1565-1574
[http://dx.doi.org/10.1049/piee.1964.0258]
[10]
M. Oka, and M. Enokizono, "Evaluation of hysteresis loss and eddy-current loss in induction motor stator cores using the excitation inner core method", In: 2016 XXII International Conference on Electrical Machines (ICEM), Lausanne, Switzerland, 2016, pp. 1686-1691,
[http://dx.doi.org/10.1109/ICELMACH.2016.7732751]
[11]
Q. Gu, L. Yuan, Z. Zhao, F. Liu, and J. Sun, "An accurate stray loss calculation method of squirrel-cage induction motors for efficiency optimization", In: 2015 18th International Conference on Electrical Machines and Systems (ICEMS), Pattaya, Thailand, 2015, pp 143- 149.
[http://dx.doi.org/10.1109/ICEMS.2015.7385016]
[12]
C. Choudhury, and N.K. Deshmukh, A novel method for reduction of stray loss in induction motor.In: 2013 IEEE Power and Energy Conference at Illinois., PECI: Champaign, IL, 2013, pp. 101-105.
[http://dx.doi.org/10.1109/PECI.2013.6506042]
[13]
S.J. Lee, J.M. Kim, D. An, and J.P. Hong, "Equivalent Circuit Considering the Harmonics of Core Loss in the Squirrel-Cage Induction Motor for Electrical Power Steering Application", IEEE Trans. Magn., vol. 50, no. 11, pp. 1-4, 2014.
[14]
W. Su, S. Mao, and P. Wang, "Estimation of the Core Losses of Induction Machines Based on the Corrected Epstein Test Method", IEEE Trans. Magn., vol. 55, no. 3, pp. 1-8, 2019.
[http://dx.doi.org/10.1109/TMAG.2018.2886155]
[15]
H. Zhao, X. Liu, H. Jia, and Y. Luo, "The influence opening and skew effect into account", In: 2009 IEEE International Electric Machines and Drives Conference, Miami, FL, 2009, pp. 213-218,
[http://dx.doi.org/10.1109/IEMDC.2009.5075208]

Rights & Permissions Print Cite
Article Metrics
2
© 2024 Bentham Science Publishers | Privacy Policy