Login Register Cart 0
Generic placeholder image

Recent Patents on Mechanical Engineering

Editor-in-Chief

ISSN (Print): 2212-7976
ISSN (Online): 1874-477X

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Dynamic Performance of High-Speed Electric Multiple Unit within Multi-Body System Simulation

Author(s): Junguo Wang*, Daoping Gong, Rui Sun and Yongxiang Zhao

Volume 12, Issue 4, 2019

Page: [339 - 349] Pages: 11

DOI: 10.2174/2666145412666190923104415

Price: $65

Abstract

Background: With the rapid development of the high-speed railway, the dynamic performance such as running stability and safety of the high-speed train is increasingly important. This paper focuses on the dynamic performance of high-speed Electric Multiple Unit (EMU), especially the dynamic characteristics of the bogie frame and car body. Various patents have been discussed in this article.

Objective: To develop the Multi-Body System (MBS) model of EMU, verify whether the dynamic performance meets the actual operation requirements, and provide some useful information for dynamics and structural design of the proposed EMU.

Methods: According to the technical characteristics of a typical EMU, a MBS model is established via SIMPACK, and the measured data of China high-speed railway is taken as the excitation of track random irregularity. To test the dynamic performance of the EMU, including the stability and safety, some evaluation indexes such as wheel-axle lateral forces, wheel-axle lateral vertical forces, derailment coefficients and wheel unloading rates are also calculated and analyzed in detail.

Results: The MBS model of EMU has better dynamic performance especially curving performance, and some evaluation indexes of the stability and safety have also reached China’s high-speed railway standards.

Conclusion: The effectiveness of the proposed MBS model is verified, and the dynamic performance of the MBS model can meet the design requirements of high-speed EMU.

Keywords: Dynamic characteristics, Lagrange's equation, power bogie, safety, stability, wheelset.

« Previous Next »
[1]
Fenayon L, Le MT. Axlebox for a railway vehicle bogie and railway bogie equipped with such an axlebox US2018170409. (2017).
[2]
Hosseini K. Vehicle guidance system WO2018126160. (2018).
[3]
Wu J, Li J, Zhou W, Tang J, Li Z, Yu P. Single-bogie calibration device for dynamic rail inspection system CN107894341. (2018).
[4]
Jin J, Chen G, Chen X, et al. Three-shaft bogie for rail transit CN108032863. (2018).
[5]
Montua S. Running gear for a rail vehicle, and bearing element for a running gear WO2018141538. (2018).
[6]
Zhang W, Ye L. Bogie with simple structure CN108045393. (2018).
[7]
Yoshihiro T, Yukitaka T, Fumikazu K, Takaya O. Bogie for railroad car WO2018139247. (2018).
[8]
Fu D, Guan R, Cheng S. Bogie and rack track car CN108099935. (2018).
[9]
Fumikazu K, Yukitaka T, Takaya O, Yoshihiro T, Kazuo I. Railway vehicle bogie WO2018139431. (2018).
[10]
Zhang X, Wang J, Lu N, Zhang L, Hu WH. Bogie US2019118840. 2019.
[11]
Chen YH, Guo JX, Dong L, Li CL, Ma R. Bolster of bogie US2019118839. (2019).
[12]
Andreas L, Martin T. Spring arrangement for a rail vehicle WO2018134174. (2018).
[13]
Yoshi S, Yukitaka T, Shunichi N, et al. Carbody support device and railway vehicle US2018162419. (2018).
[14]
Fu Y, Fan YB, Hu WH, Bi YK, Liu SQ, Zhang LJ. Bogie continuous turning welded seam welding method and welding device CN109365956. (2019).
[15]
Wu RK, Shen CY, Zhao JF, Li H. Car body of flat car for railway containers CN109229121. (2019).
[16]
Ding W, Guo QS, Zhang CL. Anti-nodding torsion bar system CN109353365. (2019).
[17]
Peng KL, Liu P, Lv GQ, Deng HM, Zhang L. Non-contact steel rail corrugation and contour detecting device CN109353370. (2019).
[18]
Song YJ, Wang XG, Song XH. Guide rail travelling crane CN109334675. (2019).
[19]
Kahlig SM. Endless track assembly for supporting an implement or vehicle US2019077473. (2019).
[20]
Wang Y, Tian AQ, Yu HY, Liu LX, Zhang CG. Chassis component of railway vehicle US2019084591. (2019).
[21]
Kondo O, Shimokawa Y. Method for measuring wear of railroad vehicle wheel flange AU2018286590. (2019).
[22]
Zhu J, Li JL, Zuo SB, et al. Bogie for semi-trailer highwayrailway combined transport dual-purpose truck CN109278784. (2019).
[23]
Zhang T, Chen ZG, Zhai WM, Wang KY. Establishment and validation of a locomotive-track coupled spatial dynamics model considering dynamic effect of gear transmissions. Mech Syst Signal Process 2019; 119: 328-45.
[http://dx.doi.org/10.1016/j.ymssp.2018.09.032]
[24]
Chen ZG, Zhai WM, Wang KY. A locomotive-track coupled vertical dynamics model with gear transmissions. Veh Syst Dyn 2017; 55(2): 244-67.
[http://dx.doi.org/10.1080/00423114.2016.1254260]
[25]
Chen ZG, Zhai WM, Wang KY. Vibration feature evolution of locomotive with tooth root crack propagation of gear transmission system. Mech Syst Signal Process 2019; 115: 29-44.
[http://dx.doi.org/10.1016/j.ymssp.2018.05.038]
[26]
Li XH, Wang YB, Li WH, Qin XF, Pang YM. Numerical calculation of stress intensity factor of tooth root crack in the high-speed EMU gear. J Mech Trans 2017; 41(12): 108-12.
[27]
Li GQ, Liu ZM, Wang WJ, Yang GX. Fatigue crack mechanism study on high-speed EMU gearbox. J Mech Eng 2017; 53(2): 99-105.
[http://dx.doi.org/10.3901/JME.2017.02.099]
[28]
Zhang L, Ren ZS, Sun SG, Yang G. Research on dynamic load and stress of high-speed EMU motor hanger considering influence of gear transmission system. JJ Mech Eng 2016; 52(4): 133-40.
[http://dx.doi.org/10.3901/JME.2016.04.133]
[29]
Liang HQ, Cai H, Zhao YX, Liu SY. Fatigue reliability analysis of welded joints for bogie frame of high-speed passenger car. Mech Sci Tech Aero Eng 2015; 34(6): 925-9.
[30]
Wang JG, He GY, Zhang J, Zhao YX, Yao Y. Nonlinear dynamics analysis of the spur gear system for railway locomotive. Mech Syst Signal Process 2017; 85: 41-55.
[http://dx.doi.org/10.1016/j.ymssp.2016.08.004]
[31]
Liu YQ, Wang BS, Yang SP. Nonlinear dynamic behaviors analysis of the bearing rotor system with outer ring faults in the high-speed train. J J Mech Eng 2018; 54(8): 17-25.
[http://dx.doi.org/10.3901/JME.2018.08.017]
[32]
Kai F, Wu PB, Wang QS. Research on dynamic performance of coupler for rescue EMUs. Proceedings of the 2015 International Industrial Informatics and Computer Engineering Conference. Chengdu, China. January, 2015.
[33]
Zhao HW, Huang ZP, Mei Y. High-speed EMU TCMS design and LCC technology research. Engineering 2017; 3(1): 122-9.
[http://dx.doi.org/10.1016/J.ENG.2017.01.004]
[34]
Wan GQ, Lin JH, Yi C. Vibration characteristic analysis and fault diagnosis of high speed train gear-box. Mech Sci Tech Aero Eng 2018; 37(1): 115-9.
[35]
Tang ZP, Sun JP, Yan L, Zou F. Dynamic contact analysis and tooth modification design for EMU traction gear. Int J Simul Model 2017; 16(4): 742-53.
[http://dx.doi.org/10.2507/IJSIMM16(4)CO20]
[36]
Zhong SF, Cao Z, Zhang J. Research and design on train traction calculating system of CRH electric multiple units. Rail Comput Appl 2014; 23(1): 10-3.
[37]
Zhou SQ, Wang MY, Kang HW. Design and simulation of traction drive system for CRH2 electric motor train units affected by road condition. IEEE Transportation Electrification Conference and Expo, Asia-Pacific Harbin, China. August, 2017.
[http://dx.doi.org/10.1109/ITEC-AP.2017.8080794]
[38]
Liu Y, Li CX, Zhang T, Sun YN. Study on dynamic marshalling and coupled control of China’s high-speed electric multiple unit. Adv Mat Res 2014; 1046: 315-37.
[http://dx.doi.org/10.4028/www.scientific.net/AMR.1046.315]
[39]
Yang L, Ma B. Bearing diagnosis of bogie gear box. International Conference on Sensing, Diagnostics, Prognostics, and Control. Shanghai, China. August, 2017.
[40]
Han DC, Ding J, Guo QJ, Zhang FD, Fang XF. Control of welding deformation for aluminum alloy draft sill of high-speed EMU. Elec Weld Mach 2015; 45(11): 155-62.
[41]
Zhou CC, Xu HH, Wei LH. Analysis of lubrication flow field in driving gearbox of high-speed EMUs. Lubr Eng 2018; 43(7): 58-62.
[42]
Zhou DM, Wang XY, Li GD. Calculation and analysis of flow field and pressure field for EMU gearbox. Lubr Eng 2018; 43(2): 127-32.
[43]
Jia WC, Xu HH, Wei LH. Orthogonal simulation test and optimization for leakage of labyrinth seal in high speed gear box. Lubr Eng 2018; 43(8): 126-31.
[44]
Chen HS, Xu GB, Dong W, Gong JL, Ma JC. The low-pressure casting technology research of aluminum alloy castings used in high-speed rail gear box. Foundry 2017; 66(1): 6-10.
[45]
Gai YX, Wang X, Zou H, Wang BJ. Load identification of bogie frame based on dynamic stress. J Mech Eng 2018; 54(12): 60-5.
[http://dx.doi.org/10.3901/JME.2018.12.058]
[46]
Wang JB, Song Y, Wu PB. Structural pattern evaluation method for EMU bogie frames. J J Mech Eng 2018; 54(18): 140-5.
[http://dx.doi.org/10.3901/JME.2018.18.140]
[47]
Meng YS, Wang QL, Gong F, Ma YQ, Zhang ZL. Finite element analysis and its test verification on EMU gearbox suspender. Comput Aided Eng 2018; 26(4): 27-31.
[48]
Zhang J, Gao XP, Li X, Xie H. Modal finite element analysis of an EMU gearbox based on experimental modal analysis. J Mech Elec Eng 2015; 32(7): 958-61.
[49]
Meng YS, Zhao YG, Wang QL, Gao L, Wang B. Interference fit analysis of coupling for high-speed EMU. Comput Aid Eng 2017; 26(5): 46-50.
[50]
Iwnicki S. Handbook of Railway Vehicle Dynamics. Taylor and Francis Group: London, MA 2006.
[http://dx.doi.org/10.1201/9781420004892]
[51]
Nie YY, Tang Z, Liu FJ, Chang J, Zhang JJ. A data-driven dynamics simulation framework for railway vehicles. Veh Syst Dyn 2018; 56(3): 406-27.
[http://dx.doi.org/10.1080/00423114.2017.1381981]
[52]
Afazov S, Denmark W, Yaghi A. Modelling aspects of the design of railway vehicle structures and their crashworthiness. P I Mech Eng F: J Rai 2016; 6: 1575-89.
[http://dx.doi.org/10.1177/0954409715605141]
[53]
Zhai WM, Liu PF, Lin JH, Wang KY. Experimental investigation on vibration behaviour of a CRH train at speed of 350 km/h. Int J Rail Trans 2015; 3(1): 1-16.
[http://dx.doi.org/10.1080/23248378.2014.992819]
[54]
Zolotas AC, Pearson JT, Goodall RM. Modelling requirements for the design of active stability control strategies for a high speed bogie. Multibody Syst Dyn 2006; 15: 51-66.
[http://dx.doi.org/10.1007/s11044-006-2361-5]
[55]
Recuero AM, Escalona JL. Dynamics of the coupled railway vehicle–flexible track system with irregularities using a multibody approach with moving modes. Veh Syst Dyn 2014; 52(1): 45-67.
[http://dx.doi.org/10.1080/00423114.2013.857030]
[56]
Abdullah WW, Jamaluddin H, Harun MH, Rahman RA, Hudha K. Modeling and simulation of railway vehicle using ADAMS/Rail. Appl Mech Mat 2014; 548-549: 515-9.
[http://dx.doi.org/10.4028/www.scientific.net/AMM.548-549.515]
[57]
Meli E, Malvezzi M, Papini S, Pugi L, Rinchi M, Rindi A. A railway vehicle multibody model for real-time applications. Veh Syst Dyn 2008; 12: 1083-105.
[http://dx.doi.org/10.1080/00423110701790756]
[58]
Xie X, Tang Z, Jiang J, Zou YS, Ding GF. Design-model-oriented simulation for high-speed railway dynamics. J Syst Simul 2018; 30(2): 465-72.
[59]
Petrenko V. Simulation of railway vehicle dynamics in universal mechanism software. Procedia Eng 2016; 134: 23-9.
[http://dx.doi.org/10.1016/j.proeng.2016.01.033]
[60]
Wang WL, Yu DS, Huang Y, Zhou Z, Xu R. A locomotive’s dynamic response to in-service parameter variations of its hydraulic yaw damper. Nonlinear Dyn 2014; 77: 1485-502.
[http://dx.doi.org/10.1007/s11071-014-1393-2]
[61]
Wang JG, Lv B, Zhao YX. Chaos and stability of spur gear transmission system for locomotive based on energy method and Floquet theory. Shock Vib 2018; 11: 1-15.
[http://dx.doi.org/10.1155/2018/5691892]
[62]
Luo GW, Shi YQ, Zhu XF, Du SS. Hunting patterns and bifurcation characteristics of a three-axle locomotive bogie system in the presence of the flange contact nonlinearity. Int J Mech Sci 2018; 136: 321-38.
[http://dx.doi.org/10.1016/j.ijmecsci.2017.12.022]
[63]
Yabuno H, Takano H, Okamoto H. Stabilization control of hunting motion of railway vehicle wheelset using gyroscopic damper. J Vib Control 2008; 14(1-2): 209-30.
[http://dx.doi.org/10.1177/1077546307080020]
[64]
Nakajima T, Feldmeier C, Sugiyama H. Flexible moving track model for curve negotiation analysis of railroad vehicles with rail roll deflection. P I Mech Eng K: J Multi Dyn 2015; 230(1): 85-98.
[65]
Bosso N, Zampieri N. Long train simulation using a multibody code. Veh Syst Dyn 2017; 55(4): 552-70.
[http://dx.doi.org/10.1080/00423114.2016.1267373]
[66]
Sugahara Y, Kazato A, Koganei R, Sampe M, Nakaura S. Suppression of vertical bending and rigid-body-mode vibration in railway vehicle carbody by primary and secondary suspension control: results of simulations and running tests using Shinkansen vehicle. P I Mech Eng F: J Rai 2009; 223: 517-31.
[67]
Zhai WM, Wang SL, Zhang N, Gao MM, Xia H, Cai CB, et al. High-speed train-track-bridge dynamic interactions - Part II: Experimental validation and engineering application. P I Mech Eng F: J Rai 2013; 1: 25-41.
[http://dx.doi.org/10.1080/23248378.2013.791497]
[68]
Escalona JL, Sugiyama H, Shabana AA. Modelling of structural flexiblity in multibody railroad vehicle systems. Veh Syst Dyn 2013; 51(7): 1027-58.
[http://dx.doi.org/10.1080/00423114.2013.786835]
[69]
Kostrzewski M. Analysis of selected acceleration signals measurements obtained during supervised service conditions-study of hitherto approach. J Vibroeng 2018; 20(4): 1850-66.
[http://dx.doi.org/10.21595/jve.2018.19367]
[70]
Gao J, Li LS, Feng W, Li QQ, Song J. Experimental study on sulfur additive loss of train-set gearbox lubricants. Lub Eng 2016; 41(12): 129-33.
[71]
Wang F, Zhang B, Lin JH. Online fault prediction of the gearbox of EMU based on data driven method. J Vib Meas Diag 2015; 35(2): 375-80.
[72]
Schiehlen W. Dynamical analysis of vehicle systems: Theoretical foundations and advanced applications. Int Cent Mech Sci Cour Lect 2009; 497: 6-13.
[73]
Song DL, Wu HL, Zhang WH, Xu TY, Jiang YA, Qi XY. Study on evolvement rule of the polygonal wear of EMU wheels and its effect on the dynamic behavior of a vehicle system.25th International Symposium of the International Association of Vehicle System Dynamics on Dynamics of Vehicles on Roads and Tracks. Rockhampton, Australia August, 2017.
[74]
Li F, Cheng D. The research on dynamic performance of 200 km/h CRH2 EMU vehicle.International Conference on Electronic and Mechanical Engineering and Information Technology. Beijing, China August, 2011.
[http://dx.doi.org/10.1109/EMEIT.2011.6023276]
[75]
Wang MY, Kou BQ, Zhao XK. Analysis of energy consumption characteristics based on simulation and traction calculation model for the CRH electric motor train units.International Conference on Electrical Machines and Systems. Jeju, South Korea October, 2018.
[http://dx.doi.org/10.23919/ICEMS.2018.8549182]
[76]
Song DL, Wu HL, Zhang WH, Xu TY, Jiang YA, Qi XY. Analysis of the instability of the high-speed EMU framework.25th International Symposium of the International Association of Vehicle System Dynamics on Dynamics of Vehicles on Roads and Tracks. Rockhampton, Austrlia August, 2017.

Rights & Permissions Print Cite
Article Metrics
13
© 2024 Bentham Science Publishers | Privacy Policy